Download Tag: India

Modular Embedded Development Platform Nvis 5004B

Modular Embedded Development Platform Nvis 5004B

Product Description

Nvis Technologies Modular Embedded Development Platform Nvis 5004B serves as a 32 bit development platform and provide means for code development. This Development Platform based on ARM7TDMI Microcontroller (LPC2148) with 512KB on chip memory This platform is designed to explore ARM architecture and supporting peripherals, an ideal platform for extensive Embedded product development.

The Nvis 5004B provides USB connection that can be used to download firmware, allows users to evaluate, prototype and create application specific designs.

Product Features

• ARM7 Controller based on LPC2148
• On board USB programmer
• USB 2.0 Full-speed compliant device controller with 2 kB of endpoint RAM
• Lear ning of USB Protocol like HID, CDC and MSD
• Master Reset/Restart Key for hardware reset
• RTOS supported (RTX, μC/OS-II )
• On board USB (UART0) and UART1 Inter face
• On board Temperature Sensor
• On board 16X2 LCD Display
• On board 10-bit DAC provides variable analog output
• On board PWM and Interrupt
• On board facility to connect JT AG Programming and debugging
• All GPIO’s are provided on 6 connectors (10X2)
• Wireless module adapter for optional – 2.4GHz ZigBee (Xbee) / Bluetooth / Wi-Fi connectivity
• Motor driver circuit for DC and Stepper Motor
• I2C and SPI Inter face connector
• On board 8 LED
• On board 4X4 Hex keypad interface
• Inbuilt Real Time Clock with Battery holder
• On board switch
• 128 byte of I2C external EEPROM
• RS485 Interface connector
• Expansion connectors for plug in modules and prototyping area
• Controller module is detachable, user can use other controller as well

Scope of Learning

• Study of ARM7(LPC2148) Microcontroller architecture
• Pin to pin study of MCU
• Study and Interface serial protocol(I2C,SPI,UART)
• Study and Interface internal PWM, Timer, Interrupt
• Study and Interface LED and Temperature sensor
• Study and Interface Internal Real Time Clock (RTC)
• Study and Interface of EEPROM memory
• Study of Internal ADC and DAC
• Study and Interface of Stepper Motors
• Study and Interface of 4X4 Hex keypad
• Study and Interface16X2 LCD
• Study of RTOS signal, semaphore, mutex, mailbox and priority scheduling
• Study and Interface various external MCXX series modules

Technical Specifications

MCU : LPC2148 External memory : EEPROM Crystal Frequency : 12 MHz LEDs : 8 nos. ADC : 14nos. Internal 10 bit ADC DAC : 10 Bit internal DAC Interrupts : 4 nos Variable Supply : 0-3.3 Volt RTC : 32.768KHz, 3.3V Battery PWM : 7 nos Sensor : LM35 Display : 16X2 LCD Display Motor Drive : L293D 600mA (5-12V) GPIO’s : All GPIO Pins Communication : USB 2.0 Full speed device control interfaces Programmer : USB Interface Programmer Mode : Run/ISP switch selection Baud Rate : 9600 bps (Default) Interconnections : 2 mm Patch chords with FRC Cables Dimensions (mm) : W 326 x D 252 x H 52 Power Supply : 110V – 260V AC, 50/60Hz Weight : 1.5Kg (approximately) 0 Operating Conditions : 0-40 C, 80% RH Included Accessories : USB cable, Mains cord, 2mm Patch cords, Product Tutorial (CD), 20 Pin FRC cable, SMPS, Stepper motor. Optional Nvis Technologies makes MCXX Series extension module to interface with this platform. OS Support : Windows XP, 7 & 8 (32bit and 64 bit)

Others related products

Embedded Training System, Modular Embedded Development Platform Nvis 5004B, 8051 Universal Development Platform Nvis 5001A, PIC Microcontroller Development Platform Nvis 5002, AVR Microcontroller Development Platform Nvis 5003, 16-Bit Development Platform Nvis 5005, Nvisduino Interface Module (Arduino Compatible) Nvis 22DM, Handheld 8051 USB Programmer Nvis 5000P, Compact PIC USB Programmer Nvis 5002P, Compact AVR USB Programmer Nvis 5003P, RFID Card Reader Module MC20RFID, Nvisduino based ZigBee Development Platform Nvis 35D, Zigbee Module MC20ZB, Finger Print Module MC20FP, GPS Module for Embedded Platforms MC20GPS, Study of GSM Application Module MC20GSM, Bluetooth Module MC20BT, WiFi Module MC20WiFi, Input interface Module MC01, ADC/DAC Module MC02, Computer Interface module MC03, Display Module MC04, Motor Drive Module MC05, Elevator Control module MC06, TTL I/O Interface Module MC07, Real Time Clock module MC08, Graphical Display module MC09, Display and Switches module MC10, Multi Interface module MC11, Infrared Module MC12, SD Card Interface module MC14, I² C ADC/DAC Module MC13, Sensor Module MC15, PWM Based Voltage Regulator Module MC16, Vehicle Motion Detector module MC17, Accelerometer Module for Embedded Platforms MC18, Experimental Modules For 8085 or 8086 Trainers (EM01 to EM10), Interfacing Modules For 8085 or 8086 Trainers (IM01 to IM18)

 Others Social Link

• Supplier in BD : Elite Scientific & Meditech Co
• Web address   : www.elitetradebd.com
• Twitter            : https://twitter.com/elitetradebd
• Face book      : https://www.facebook.com/elitetradebd
• Instagram       : https://www.instagram.com/elitetradebd/
• LinkedIn         : https://www.linkedin.com/in/elitetradebd/#

RoboCar Nvis 3302P

RoboCar Nvis 3302P

Product Description

Nvis 3302P RoboCar is an electro-mechanical platform with the capability of sensing the environment, processing the data, and acting according to the preprogrammed sequence. It is a miniature prototype car powered by batteries whose motion is controlled by PIC16F877A microcontroller. Various Sensors can be interfaced like IR (Infrared) Sensor, Ultrasonic Sensor, Analog Sensor, and many more.

It is a multitasking Robocar that can perform actions such as line follower, obstacle detection with wireless operation with DC motor drive. Robocar displays all action on LCD. Nvis 3302P RoboCar is a Robot designed for Robotics students. It will help them to get comfortable with the world of Robotics and Embedded Systems.

Nvis 3302P, RoboCar is an ideal platform to enhance education, training, skills & development amongs our young minds.

Product Features

• 16 x 2 character LCD interface
• Ultrasonic Sensor interface
• Infrared(IR) Transmitter interface
• IR Receiver interface
• DC Motor interface & control
• Buzzer interface
• Switch interface
• Expansion connectors
• Onboard battery charger
• PC based programming
• RF module interface(Optional)
• Analog Sensor interface (Optional)

Scope of Learning

• Learn to interface various Sensors like: IR Sensor, Ultrasonic Sensor, Analog Sensor (optional)
•  Learn to interface LCD with PIC16F877A microcontroller
• Learn to interface DC motor with PIC16F877A microcontroller
• Gaining indepth knowledge about Robotics and PIC microcontroller that will be useful in further studies
• Learn the concept of RF communication (optional)

Technical Specifications

• MCU : PIC16F877A
• Crystal Frequency : 20MHz
• DC Power Supplies : +8.4V & +5V
• Charger Supply : 9V

Motor –

• Rated Voltage : +8.4V DC –
• Rated Speed : 100 rpm –
• Rated Torque : 2Kgcm –
• Rated Current : 600mAH
• Lithium Polymer battery
• Interconnection for modules : CBK female connectors
• General –
• Dimensions (mm) : W 220 x D 170 x H 105
• Weight : 1.5kg (approx.)

Sensors

• IR Transmitter-Receiver : IR LED Pair
• Ultrasonic Sensor (LV-MaxSonar)
• Reading rate : 20Hz
• Operating voltage : 2.5-5.5V
• Measuring distance : 254 inches (645cm)
• Current consumption : 2mA current
• Analog Sensor (optional)
• Operating voltage : 4.5V to 5.5V
• Current consumption : 30mA (Typical)
• Output : Analog Voltage
• Max. Range : 80cm
• Min. Range : 10cm
• RF Module (optional)
• Working voltage : 3.3V
• Frequency of operation : 2.4GHz
• Typical operating range : 30 ft.
• UART baud rate : 9600bps
  Included Accessories
• Battery (8.4 V) 1 no.
• CBK female connector 3 nos.
• Software CD 1 no.
• Battery Charge adapter (9 V) 1no.

Optional Accessories

RF module (Nvis MC15S09) Analog Sensor Compact PIC IC programmer (Nvis 5002P)

Others Social Link

• Supplier in BD : Elite Scientific & Meditech Co
• Web address   : www.elitetradebd.com
• Twitter            : https://twitter.com/elitetradebd
• Face book      : https://www.facebook.com/elitetradebd
• Instagram       : https://www.instagram.com/elitetradebd/
• LinkedIn         : https://www.linkedin.com/in/elitetradebd/#

Educational Robot with 5 Axis moving Arm Nvis 3301C

Educational Robot with 5 Axis moving Arm

Product Description

Nvis 3301C Educational Robot with 5 Axis Moving Arm an educational robotic arm based on ATmega 128 which provides knowledge about basic mechanical design concepts and also deals with very fascinating features like Servo motor interfacing and controlling, wireless control,  graphical TFT interfacing etc. This Moving Arm driven by the RC servo motors consists of 5 degree of freedom (DOF) which can be represented by the rotating base, shoulder, elbow, wrist and the gripper.  DC motors at its base makes it a moving robotic arm.

Product Features

• Moving Robotic Arm
• Wireless Wi-Fi control
• 160×128 TFT  Color LCD interface
• DC motor interface & control
• Servo motor interface
• Switch interface
• Expansion connectors for more experiments
• Onboard battery charger
• PC based programming
• Gripper for pick and place
• Online Product Tutorial

Scope of Learning

• Learn to interface RC servo motor with ATmega128 microcontroller
• Learn the concept of RF communication
• Learn to interface LCD with ATmega128 microcontroller
• Learn to interface DC motor with ATmega128 microcontroller
• Learn the concept of Pick and Place Robot
• Learn to interface color sensor and study of application like color detection and sorting
• Gaining knowledge about Robotics and ATmega128 microcontroller
• Wi-Fi Module Interface

Technical Specifications

• MCU : ATMega128
• Crystal Frequency : 16MHz DC
• Power Supplies : +8.4V & +5V & 3.7V
• Charger Supply : 9V/1A
• Battery Power : 8.4V / 4400mAh

Motor

• DC Motor
• Rated Voltage : +12V DC
• Rated Speed : 100rpm
• Rated Torque : 2Kgcm
• Rated Current : No load-60mA, With load 300mA
• High Torque Metal Gear Standard Servo
• Operating Voltage : 4.8-6.0 Volts
• Operating Speed(4.8V) : 0.18sec/60 degrees at no load
• Stall Torque(4.8V) : 14kg/cm
• Degree of Freedom
• Payload
• Included Accessories

Optional Accessories

Base : 0 to 180 o Shoulder (1 and 2) : 0 to 180 o Elbow : 0 to 180 o Wrist : 0 to 180 o o Grip : 50 to 90 : 150 gm Battery (8.4V) : 1 no. 4-pin relemate female cable : 3 nos. Compact AVR USB Programmer (Nvis 5003P) : 1 no Software CD : 1 no. Battery Charger Adapter 9V : 1 no. Sensor Modules: – IR Sensor (Nvis MCS02) – TSOP-IR Sensor (Nvis MCS03) – Fire Sensor (Nvis MCS04) – Light Sensor (Nvis MCS05) – Clap Sensor (Nvis MCS06)
Nvis 3301C

Others Social Link

• Supplier in BD : Elite Scientific & Meditech Co
• Web address    : www.elitetradebd.com
• Twitter             : https://twitter.com/elitetradebd
• Face book        : https://www.facebook.com/elitetradebd
• Instagram         : https://www.instagram.com/elitetradebd/
• LinkedIn          : https://www.linkedin.com/in/elitetradebd/#

 

Sensor Modules for robotics & Embedded Platforms Nvis MCSxx

Sensor Modules for Robotics & Embedded Platforms Nvis MCSxx

Product Description

Nvis Sensor based modules are designed in order for them to be compatible with any category i.e. from basic to advanced level microcontrollers. All these Sensors are suited for applications in Robotics. Nvis Sensors can be used as extension modules for Nvis 3302A ARM Development Platform and Nvis 3302W RoboCar.

Nvis MCSxx, Sensor Modules For Robotics & Embedded Platforms is an ideal platform to enhance education, training, skills & development amongs our young minds.

8-Channel IR Sensor

Applications

White line follower. Black line follower. Edge follower

List of Accessories 3 Pin CBK Cable – 1 no.

Technical Specifications

• IR Receiver Phototransistor : PT333-3C
• Wavelength of Peak Sensitivity : 940nm
• IR Transmitter Infrared LED : IR333-A
• Wavelength of Peak Sensitivity : 940nm
• Input : 5V DC
• Output : TTL
• Dimensions : 25 x 40 mm

Scope of Learning

Learn the concept of IR receiver and transmitter. Study of line follower Robots.

Note:

This module is compatible with Nvis 50XX, RoboCar Nvis 3302A and RoboCar Nvis 3302W

IR Sensor

• Applications
• White line follower.
• Black line follower.
• Edge follower.
• Wall follower .
• Obstacle avoider.
•  Micromouse.

 List of Accessories

3 Pin CBK Cable – 1 no.

Technical Specifications

IR Receiver

Phototransistor : PT333-3C

Wavelength of Peak Sensitivity : 940nm

IR Transmitter

• Infrared LED : IR333-A
• Wavelength of Peak Sensitivity : 940nm
• Input : 5V DC
• Output : TTL
• Dimensions : 25 x 40 mm

Scope of Learning

• Learn the concept of IR receiver and transmitter.
• Study of line follower and edge follower concepts in Robotics.
• Study of applications like wall follower, obstacle avoider.

TSOP-IR Sensor

Applications

• White line follower.
• Black line follower.
• Edge follower
• Wall follower.
• Obstacle avoider.
• Micromouse .

List of Accessories

3 Pin CBK Cable – 1 no.

Technical Specifications

•  IR Receiver TSOP : 1738
• Frequency Range : 38-40KHz

IR Transmitter

• Infrared LED : IR333-A
• Wavelength of Peak Sensitivity : 940nm
• Input : 5V DC
• Output : TTL
• Dimensions : 25 x 40 mm

Scope of Learning

Study of TSOP receiver and IR transmitter Study of application like Obstacle avoider, Micromouse, object follower.

Fire Sensor

Applications

 Fire extinguisher. Fire avoider

List of Accessories 3 Pin CBK Cable – 1 no.

Technical Specifications

• IR Receiver Photo diode : BPX65
• Wavelength Range : 500-110nm
• Input : 5V DC
• Output : TTL
• Dimensions : 25 x 40 mm

Scope of Learning

Study of photodiode as IR receiver Study of concept of fire detection & avoidance for Robotics and other embedded applications.

Light Sensor

Applications

Photophobic Robot. Phototropic Robot

List of Accessories 3 Pin CBK Cable – 1 no.

Technical Specifications

• Light Dependent Resistor Cell resistance : 400 Ohm
• Input : 5V DC
• Output : TTL
• Dimensions : 25 x 40 mm

Scope of Learning

Study of Light Dependent Resistor. Study of Light sensor in photophobic and phototropic Robots.

Clap Sensor

Applications

Sound activated/deactivated Robot.

List of Accessories 3 Pin CBK Cable – 1 no.

Technical Specifications

• Condenser Microphone Sensitivity : -44 to ± 3dB
• Input : 5V DC
• Output : TTL
• Dimensions : 25 x 40 mm

Scope of Learning

Study of NE555 IC in monostable mode. Study of sound detection for Robotics and other embedded applications

L293D Motor Drive Module

L293D Motor Drive Module is an H bridge driver that drives DC Motor, Stepper Motor and relays. It can be easily combined with any of our Sensor Modules of MCSXX series and can hence serve as a common interface. Screw terminals and 10- pin relimate connectors are provided for easing connections and use. It supports current rating of about 600mA per channel. This module is best for beginner’s level Robotics.

Features

Easily mountable.LED is provided for power indication. Standard pin connections. Compact design Individual PWM control for both channels

Scope of Learning

Learn to interface two bidirectional DC Motor. Learn to drive Stepper Motor. Learn to drive Relays and Solenoids. Learn to implement Manual and Autonomous Robots.

Technical Specifications

•  Operating Voltage : Up to 35 volts
• Output current : 600 mA per channel (1.2 A peak current)
• Microcontroller Interface : Provided (10 Pin Relimate Type)
• Input Connectors : Provided (3 Pin Relimate Type)
• Output Connector : Screw
• Terminals Battery connector : 3 Pin
• Dimensions : 48 x 60 mm

Applications

Motors. Can be used to drive one Stepper Motor. Can be used for driving Relay and Solenoid Can be interfaced with microcontrollers for high end applications Simultaneous control of two bidirectional DC

List of Accessories 3 Pin CBK Cable – 1 no. Jumpers – 8 nos.

L298D Motor Drive Module

L298D Motor Drive Module is a compact H bridge driver that can drive two DC Motors or one Stepper Motor and relay at a current rating of about 2 ampere. The entire circuit is mounted on a high quality double layer PCB. DC Motor screw terminals are provided for easing connections. Connectivity with microcontroller is achieved by using 10-pin relimate connector. The circuit can work over range of voltages as per specification. For an increase in output current two drivers are connected in parallel. Moreover this product supports all the Sensor Modules of MCSXX series to drive motors directly and hence simple Robots can be built using this motor driver and any of our Sensor Modules.

Features

Easily mountable. LED is provided for output indication. Standard pin connections, Compact design Individual PWM control for both channels.

Scope of Learning

Learn to drive dual bidirectional DC Motor. Learn to drive Stepper Motor. Learn to drive Relays and Solenoids. Learn to implement Manual and Autonomous Robots.

Technical Specifications

• Operating Voltage : Up to 35 volts
• Output current : 2 Amperes per channel
• Microcontroller Interface : Provided (10 Pin Relimate Type)
• Input Connectors : Provided (3 Pin Relimate Type)
• Output Connector : Screw Terminals
• Battery connector : 3 Pin
• Dimensions : 45 x 70 mm

Application

Bidirectional dual DC Motor driver. Single Stepper Motor driver. Relay driver. Solenoid driver Can be interfaced with microcontrollers for high end applications

List of Accessories  3 Pin CBK Cable – 1 no. Jumpers – 8 nos.

Others Social Link

• Supplier in BD : Elite Scientific & Meditech Co
• Web address    : www.elitetradebd.com
• Twitter             : https://twitter.com/elitetradebd
• Face book        : https://www.facebook.com/elitetradebd
• Instagram         : https://www.instagram.com/elitetradebd/
• LinkedIn          : https://www.linkedin.com/in/elitetradebd/#

16 Channel Servo Driver Nvis 3305D

16 Channel Servo Driver Nvis 3305D

Product Description

Nvis 3305D -16 Channel Servo Driver is a reliable, plug and play servo controller for hobbyists and students. It is designed to drive 16 servos at a time with ease to user. It is capable of generating 16 PWM outputs of 50Hz and duty cycle varies from .5ms to 2.5ms at a time in order to drive servo motors.

The whole system is designed in such a way that user find no difficulty in communicating with the device. It uses a simple protocol based on serial communication to control each servo motor separately and is assembled with software to debug and control Servo motors using PC. One can easily connect his/her Robot to this device using standard servo connector and control its motion using controller or Computer.

Nvis 3305D, 16 Channel Servo Driver is an ideal platform to enhance education, training, skills & development amongs our young minds.

Product Features

• 16 independent servo channels
• 50Hz, 0.5ms to 2.2ms PWM output
• Group motion controlling
• Speed controlling for each servo
• Can be controlled with any microcontroller board supporting
• serial communication
• Demo mode: Running every servo motor simultaneously form 0 to 180
• Interfaced with PC using USB
• PC software available

Scope of Learning

• Learn to drive Servo motors using PWM
• Build various Servo based Robots like Hexapod, Humanoid & many more.
• Undertake projects that needs precise controlling of Servo motors

Technical Specifications

• Channels : 16
• PWM : 50Hz, 0.5 ms to 2.5 ms
• Input Voltage Range : 0 to 6V
• Resolution : 12 Bit
• Servo connector : Standard Type
• PC connector : B-type USB
• Serial com (Baud Rate) : 9600 bps
• PC GUI Software : Available
• Dimension : W 95 x D50 x H 25

General Specifications

• Length : 9.2 cm
• Width : 5.1 cm
• Weight : 100gm
• Power : 5V DC/200mA
• Included Accessories 5V DC adaptor : 1
• PC software & Learning material CD : 1
• Jumpers : 5
• Supplier in BD : Elite Scientific & Meditech Co
• Web address    : www.elitetradebd.com
• Twitter             : https://twitter.com/elitetradebd
• Face book        : https://www.facebook.com/elitetradebd
• Instagram         : https://www.instagram.com/elitetradebd/
• LinkedIn          : https://www.linkedin.com/in/elitetradebd/#

6-Axis Robotic Platform Nvis 3300

Nvis 3300 6-axis Robotics Trainer

Information

Nvis 3300 6-Axis Robotics Platform is versatile training equipment, not only for Mechatronics students but also for all Robotics enthusiasts to understand the very basic concept of Robotics i.e. study of axis motions. To make it simple we have provided a programmable Robotic ARM with an interactive front panel. Accompanied software demonstrates complete functioning of Platform as well as allows user to develop their own programs.

Product Description

6 Axis Robotics Trainer is versatile training equipment, not only for Mechatronics students but also for all robotics enthusiasts to understand the very basic concept of robotics i.e. study of axis motions. To make it simple we have provided a programmable robotic arm with an interactive front panel. Accompanied software demonstrates a complete functioning of the trainer as well as allows a user to develop their own programs. NV330

NV3300, 6 Axis Robotics Trainer is an ideal platform to enhance education, training, skills & development among our young minds.

Product Features

• Study of Stepper motor and Servo motor
• Study of Sensors
• Each axis can be controlled individually
• Ideal to understand basics of CNC machine
• Can be operated from 8 bit microcontroller to ARM processors
• Can be controlled from computer
• Programmable tasks
• Record and Play capability
• Optional interfacing with PLC
• Ample work area
• Touch operated ON/OFF switch
• Auto set to home position
• User can develop own applications
• Self-contained and easy to operate
• Data acquisition using USB
• Graphical representation
• User friendly software
• Exhaustive course material & references
• Online Product Tutorial

Technical Specifications

• Work Area (mm) : 400 x 400
• Gripper AOF : 180° Gripper Payload : 250g
• Stepper Motors : 3 nos.
• Servo Motors : 4 nos.
• IR Switches : 2 nos.

Stepper Motor Specifications

• Type : 6 wire, Unipolar
• Step Angle : 1.8°
• Holding Torque : 4.1kg cm
• Operating Voltage : 5V
• Servo Motor Specifications
• Control System : PWM 1520 ìsec Neutral
• Stall Torque : 3.2kg cm
• Operating Voltage : 5V
• Sensor : IR as Limit Switch

Drive type

• X & Y Axis : Belt Driven – 2 Axis
• Z Axis : Servo Motor Driven – 4 Axis
• Mains Supply : 90-275V, 50Hz
• Dimensions (mm) : W 610 x H 500 x D 490
• Weight : 7kg (approx)
• Power Supply : 230 V ±10%, 50 Hz

• Supplier in BD : Elite Scientific & Meditech Co
• Web address    : www.elitetradebd.com
• Twitter             : https://twitter.com/elitetradebd
• Face book        : https://www.facebook.com/elitetradebd
• Instagram         : https://www.instagram.com/elitetradebd/
• LinkedIn          : https://www.linkedin.com/in/elitetradebd/#

Related Products

Robotics, Nvis 3300 6-axis Robotics Trainer, Nvis 3300, Nvis 3301C, Educational Robot with 5 Axis moving Arm, Nvis 3301C, Nvis 3305 RoboLeg, Nvis 3305, Nvis 3302A, RoboCar Nvis 3302A, Nvis 3302P, Nvis 3302P RoboCar, Nvis 3302W, Nvis 3302W Basic RoboCar, Nvis MCSxx, Nvis MCSxx Sensor Modules For Robotics & Embedded Platforms, Nvis 3305D, Nvis 3305D 16 Channel Servo Driver, Simtel23 Robotics, Nvis 3302ARD, Nvis 3302ARD RoboCar, Nvis 3302ARM, RoboCar.

PCB Prototype Machine Nvis 72

PCB Prototype Machine - Nvis 72

If you are an impatient circuit designer who wants to replicate software design on the PCB with high precision and accuracy, and also without investing much of your valuable time and efforts, we have an exciting solution for you.

Nvis 72 PCB Prototype Machine provides several features which can make your life easier. With this new electro-mechanical utility, you can escape cumbersome task of traditional PCB designing which involves time taking etching and drilling processes. Get rid of dealing with chemicals which often spoil your hands and are harmful to you and environment. Provided with the USB connectivity, Nvis 72 can print your desired circuit on the PCB within minutes. Accompanied design software provides simple and elegant interface which is user-friendly, and can even be operated by novice Engineers and Students.

Features

• Versatile PCB prototyping
• Auto depth adjustment
• Position Selection facility
• Light for work area
• Micro drilling & milling
• Pause/Resume option
• Process Logging
• Design two layer PCB
• Emergency Stop and Play
• PC based Software with interactive GUI
• PCB Viewer
• Software support extended Gerber files from all CAD Software
• Rugged and fully protected
• Simple and Easy to operate
• Step by Step execution
• Chemical free operation
• USB Interface
• Energy efficient

Technical Specifications

Working area	: 230x200x15mm
Min drill hole size	: 0.3 mm
Min cutting trace/space	: 0.2mm (8mil)
X/Y Resolution	: 0.006 mm
Spindle speed (MAX.RPM)	: 25000 rpm
Spindle Motor	: BLDC Motor
Depth sensing and adjusment	: Automatic, Software controlled
Tool change	: Manual
Tool holder	: 1/8 inch
Auto Bit protection	: available
X/Y/Z driver	: Stepping Motor
Dimensions (W x H x D)	: (432x320x455) mm
Weight	: 28kg (approximately)
Power consumption	: 110/220VAC, 50W
Sound/Dust Enclosure	: Integrated
Operating System	: Windows XP/7/8/10 (32/64 bit)

Included Accessories

• Brush (1 No.)
• Allen key (2 Nos.)
• Adhesive tape (1 No.)
• Copper clad boards (single side 140 x 140mm) (10 No.)
• Copper clad boards (double side 140 x 140mm) (4 No.)
• Nose pliers (1 No.)
• Power cord (1 No.)
• Nvis 72 Power Supply (1 No.)
• USB cable A to B (with filter) (1 No.)
• Patch cord 8″ (2mm) (1 No.)
• Tool Drill bits
  • – Router Bits (2 Nos.)
  • – Engrave bits (90°) (2 Nos.)
  • – Engrave bits (60°) (1 No.)
  • – Engrave bits (0.5mm) (2 Nos.)
  • – Engrave bits (1.5mm) (1 No.)
  • – Drill bits (16 Nos.)

Nvis 72 PCB Prototype Machine is ideal to plot PCB for applications:

• High power PCB
• Analog PCB
• Digital PCB
• Supplier in BD : Elite Scientific & Meditech Co
• Web address    : www.elitetradebd.com
• Twitter             : https://twitter.com/elitetradebd
• Face book        : https://www.facebook.com/elitetradebd
• Instagram         : https://www.instagram.com/elitetradebd/
• LinkedIn          : https://www.linkedin.com/in/elitetradebd/#

Battery hydrometer

Battery hydrometer

Description
Battery hydrometer
Brand: MC
Origin: India
Whole length: 330mm
Measure range: 1.100~1.300
Battery hydrometer acid electrolyte
Function: Professional for measuring acidity and alkaline storage battery solution.
Assemble the red rubber, there is a hole on it, mainly for protect the densimeter from being sucked into the gasbag.
Put the densimeter into the glass tube.
Assemble the sucking head.
Then assemble the gasbag.
Package include: 1 X Battery Hydrometer.

• Supplier in BD : Elite Scientific & Meditech Co
• Web address    : www.elitetradebd.com
• Twitter             : https://twitter.com/elitetradebd
• Face book        : https://www.facebook.com/elitetradebd
• Instagram         : https://www.instagram.com/elitetradebd/
• LinkedIn          : https://www.linkedin.com/in/elitetradebd/#

Domestic Cream Separtor, 60 L/Hr

Specifications: – 60 Liter/Hr.

Hand Operated Cream Separator Machine

• Machine Capacity : 60 Liter / Hr.
• Tank Cap. : 5 Liter
• No of S.S. Discs : 9
• Provision to Operate by Hand : 60 Rpm
• Separation Temperature: 35 – 40 C / 95-108 F
• Solid Removal Time : 1.5 Hour
• Machine Length : 380 mm X Width : 320 mm X Height : 500 mm
• Machine Weight: Net: 13 Kg Gross: 30 Kg Approx.
• Bowl Material: M.S. / S.S. 304
• Spout Set Material: CRCA Sheet / S.S. 304 Sheet
• Receiving Tank Material: Aluminum Sheet / S.S. 304 Sheet

Scratch Hardness Tester

As a prominent company, we are engaged in offering a wide range of Scratch Hardness Tester, used to tests scratch resistance under specified loads. These testers are manufactured by our adroit professionals using high-grade raw material and advanced technology. Our testers are highly acclaimed by our clients for their expansive applications and indispensable features. In order to meet maximum clients’ satisfaction, we have reasonably priced our range without compromising with the quality.
Features:

• Tests scratch resistance under specified loads
• Tests conducted on go/no-go basis
• Testing performed at single specified load on a needle
• Testing also performed by a process comprising increasing loads for determining minimum load at which coating penetration is achieved Tests conducted on go/no-go basis

Applications:

• For carrying out tests related to scratch resistance under specified loads

Digital microprocessor PID based heat deformation tester for milk testing

Features:

• Equipped with 2 stations to measure Deflection temperature and Vicat Softening temperature
• Precise measurement through Digital Dial Gauge
• Used for testing with both water and silicone oil
• Advanced Digital Microprocessor PID based temperature controller
• Inbuilt Auto tuning function
• Highly accurate test results under uniform temperatures in the chamber
• Setting to RTD PT-100 sensor through advanced PID controller
• High Quality rugged structure with corrosion resistant main body
• Digital Dial gauge to measure the deflection in test samples
• Fast Guiding Mechanism with plunger rod
• Single handed hassle free operation with test start operation
• Stirrer Motor for Precise stirring of sample inside the tank &
• for Uniformity of Temperature

Applications:

• Industrial Engineering
• Finite Elements in Analysis and Design
• Aerospace industry
• Steel for marine applications

Digital carbonation assembly dual scale dial thermometer

Features:

• The instrument allows simultaneous measuring of pressure & temperature of carbonated drinks.
• Tester comes with dual scale of 60psi and 4.2kg/sq.cm
• Comes with pressure gauge support
• Also features dual scale dial thermometer with Upto 300ºC range

Applications:

• In consumer beverage manufacturing like soft drinks

Electric fill height gauge

With firm commitment to quality, our organization is manufacturing, exporting & supplying a wide range of Fill Height Gauge for our clients. Manufactured using premium quality raw material, this product is highly demanded by our valued clients. Our dexterous team of experts makes use of updated technology and modern tools to design this rust free product as per set international guidelines. Our esteemed client can avail this gauge from us at market leading prices.
Features:
Fill Height Syringe is a valuable laboratory tool that can save time and improve accuracy during container fill height and volume measurements. This unique device allows an operator to easily adjust the fill level of containers to be evaluated to a standard predetermined level. Using the adjustable gauge, an operator can simply set the depth of the pipette for the appropriate level. Excess fluid can then easily be drawn off to the end of the pipette. Easy to use Used to adjust water level in bottle to predetermined fill height
Applications:

• For fill height and volume measurements in –
• Bottle filling industry