Autoclaves(Vertical Type)
Performance
- Microprocessor controller and temperature calibration function allows for high precision temperature control.
– Sterilization temperature at 110 to 123°C
– Melting* temperature at 60 to 100°C
* Liquefaction of coagulated agar media. - Automatic sterilization system for unattended operation.
– Heating > Check safe > Sterilization > Sterilization safe > Exhausting > End - Convenient operation modes for various uses.
– Standard modes and program modes are listed in detail as below tables. - Temperature calibration function.
| Standard modes | Temp. (°C) | Time (min.) | ||
| Decontamination | 121 | 35 | ||
| Solids sterilization | 121 | 20 | ||
| Liquids sterilization | 121 | 15 | ||
| Melting | 100 | 30 | ||
| Program modes | Temp. (°C) | Time (min.) | ||
| Sterilization 1 | 110 to 123 | 1 to 999 | ||
| Sterilization 2 | 110 to 123 | 1 to 999 | ||
| Liquid sterilization | 110 to 123 | 1 to 999 | ||
| Melting | 60 to 100 | 1 to 999 | ||
Convenience
- Conveniently monitored by an independent control display, sterilization process display, and pressure gauge.
– VFD for visualization of temp, pressure (optional), timer, warning alert checks.
– LED lamps for sterilization process check.
– Easy pressure check with the standard gauge attached to the front. - Vertical type autoclaves which allow for top loading are suitable for high volume sterilization.
– Baskets are stackable two high or even more levels, which secure inside the chamber space requirements. - Low-maintenance
– The chamber is constructed of stainless steel which is superiorly resistant to corrosion.
– Easy to replace silicone gasket. - Convenient documentation with the optional data recorder.
– Dot type recorder(6 point) allows for precise documentation.
Safety
- Mechanical safety devices
– Over current protection.
– Over temperature protection by automatic power cutoff.
– Over pressure protection by automatic and manual safety valve. - Safety warning systems
– Over temperature warning.
– Low temperature warning.
– Low water level warning.
– Low heat warning if the temperature does not reach the sterilization or melting temperature.
– Sterilization fail warning if the operation is unexpectedly stopped during sterilization process. - Slide opening door with plastic cover of low thermal conductivity prevents burns from the contact.
| Model | ST-50G | ST-65G | ST-85G | ST-105G | |
| Control | Microprocessor PID control | ||||
| Chamber volume (L / cu ft) | 50 / 1.8 | 65 / 2.3 | 85 / 3.0 | 105 / 3.7 | |
| Temperature 1) | Sterilization temp. (℃ / ℉) | 110 to 123 / 198 to 221.4 | |||
| Melting temp. (℃ / ℉) | 60 to 100 / 108 to 180 | ||||
| Pressure | Sterilization at 121℃ (kg/cm2) | 1.1 to 1.2 | |||
| Gauge range in analog (Mpa) | – 0.1 to 0.6 | ||||
| Safety | Over temperature protector / Pressure safety valve / Over current protector | ||||
| Warning alert (over temp. / low temp. / low heat / sterilization fail / low water level) | |||||
| Timer | 0 to 999 min. | ||||
| Dimension | No. of baskets (standard / max.) | 2 / 2 | 2 / 2 | 2 / 2 | 2 / 2 |
| Load per baskets (Kg / lbs) | 10 / 22.0 | ||||
| Basket (ØxH) (mm / inch) | 380×180 / 14.9×7.1 | 380×230 / 14.9×9.1 | 380×330 / 14.9×13.0 | 380×405 / 14.9×15.9 | |
| Interior (WxH) (mm / inch) | 400×458 / 15.7×18.0 | 400×558 / 15.7×21.9 | 400×758 / 15.7×29.8 | 400×908 / 15.7×35.7 | |
| Exterior (W×D×H) (mm / inch) | 624x672x870
/ 24.6×26.5×34.2 |
624x672x971
/ 24.6×26.5×38.2 |
624x672x1083
/ 24.6×26.5×42.6 |
624x672x1233
/ 24.6×26.5×48.5 |
|
| Exterior with exhaust tank
(W×D×H) (mm / inch) |
722x672x870
/ 28.4×26.5×34.2 |
722x672x971
/ 28.4×26.5×38.2 |
722x672x1083
/ 28.4×26.5×42.6 |
722x672x1233
/ 28.4×26.5×18.5 |
|
| Net weight (Kg / lbs) | 94.5 / 208.3 | 99.5 / 219.4 | 104 / 229.3 | 110 / 242.5 | |
| Electrical requirements (230V, 50 / 60 Hz) | 14.3A | 14.3A | 14.3A | 21.3A | |
| Cat. No. | AAHL1015K | AAHL1025K | AAHL1035K | AAHL1045K | |
- 1) Technical data according to EN 554 / BS EN 285:1997.
* Permissible environmental conditions: temperature (5-40°C) and relative humidity (10-80%).
Low Temp. Incubators (Air-jacketed)
Performance
Temperature range from 4°C to 70°C.
Microprocessor PID control.
Three point temperature calibration / Automatic tuning.
Natural convection within the chamber induced by the heater and the fan located inside the air jacket.
Convenience
Large chamber volume: maximum 254L.
Bright VFD display (0.1℃resolution)
Dual delayed on/off timer modes. (1 min. to 99 hr. 59 min.)with heating level indication and quick adjustable dial knob.
Convenient preset function for 3 most commonly used temperature settings.
Built-in electrical outlet with a safety cover inside the chamber.
Convenient sample monitoring without affecting chamber temperature via the inner tempered-glass door.
Rounded inner chamber corners for easy cleaning and optimal airflow.
Quick-release front grill for easy cleaning of the condenser.
Built-in RS-232 port and USB port for external control and data collection.
Safety
Automatic run after power interruption.
Over-current protection.
Triple independent temperature monitor system.
– Temperature deviation alarm (High/Low)
– Electronic temperature limiter (High/Low)
– Mechanical over-temperature limiter (High)
Keypad lock function prevents accidental changes during operation.
Audible and visible open door alarms.
| Model | IL-15A | IL-25A | |||
| Chamber volume (L / cu ft) | 156 / 5.5 | 254 / 8.97 | |||
| Refrigerator (Hp) | 1 / 6 HBP | 1 / 6 HBP | |||
| Temperature | Range (℃ / ℉) | 4 to 70 / +39.2 to 158 | |||
| Fluctuation 1) at 37℃ (±℃ / ℉) | 0.2 / 0.36 | ||||
| Variation 1)at 37℃ (±℃ / ℉) | 0.7 / 1.26 | ||||
| Dimension(W×D×H) | Interior (mm / inch) | 600×520×500/ 24×20.5×20 | 500×540×940/ 20×21.3×37 | ||
| Exterior (mm / inch) | 770×790×1115/ 30×31.1×43.9 | 670×805×1668/ 26.4×31.7×65.7 | |||
| No. of wire shelf (standard / max.) | 2 / 11 | 3 / 25 | |||
| Net weight (Kg / lbs) | 108 / 238.1 | 145 / 319.7 | |||
| Electrical requirements (230V) | 60Hz, 6.6A | 50Hz, 6.6A | 60Hz, 8.0A | 50Hz, 8.0A | |
| Cat. No. | AAH220622K | AAH220612K | AAH220722K | AAH220712K | |
| Electrical requirements (120V) | 60Hz, 10.2A | 60Hz, 12.3A | |||
| Cat. No. | AAH220632U | AAH220732U | |||
Incubators (Economy)
Performance
Temperature range from ambient +3°C to 60°C.
Microprocessor PID control / Temperature calibration / Automatic tuning.
Vibration-free design ideal for yeast cultivation.
– Free from noise, vibration, and mechanical troubles by film type heating method.
Convenience
Intuitive control panel with bright LED display. (0.1℃resolution)
Dual wait on/off timer modes. (1 min. to 99 hr. 59 min.)
Convenient preset function for 3 most commonly used temperature settings.
Convenient sample monitoring without affecting chamber temperature via the inner tempered-glass door.
Rounded inner chamber corners for easy cleaning and optimal airflow.
Stackable up to 2 units using the optional stacking kit. (optional)
Safety
Automatic run after power interruption.
Keypad lock function prevents accidental changes during operation.
Over-temperature and over-current protection.
Audible and visible open door alarms.
| Model | IB-01E | IB-11E | IB-21E | |
| Chamber volume (L / cu ft) | 65 / 2.3 | 150 / 5.3 | 205 / 7.2 | |
| Temperature | Range (℃ / ℉) | Amb. +3 to 60 / Amb. +5.4 to 140 | ||
| Fluctuation 1) at 37℃ (±℃ / ℉) | 0.2 / 0.36 | 0.3 / 0.54 | 0.1 / 0.18 | |
| Variation 1)at 37℃ (±℃ / ℉) | 0.6 / 1.08 | 0.8 / 1.44 | 1.1 / 1.98 | |
| Dimension (W×D×H) | Interior (mm / inch) | 423×355×445
/ 16.7×14×17.5 |
500×515×585
/ 19.7×20.3×23 |
632×515×630
/ 24.9×20.3×24.8 |
| Exterior (mm / inch) | 533×475×725
/ 21×18.7×28.5 |
595×630×865
/ 23.5×24.8×34 |
740×630×910
/ 29.1×24.8×35.8 |
|
| No. of wire shelf (standard/ max.) | 2 / 10 | 2 / 13 | 2 / 14 | |
| Net weight (Kg / lbs) | 33 / 72.8 | 47 / 103.6 | 57 / 125.7 | |
| Electrical requirements (230V, 50 / 60Hz) | 1.1A | 2.2A | 2.4A | |
| Cat. No. | AAH26015K | AAH26025K | AAH26035K | |
| Electrical requirements (120V, 50 / 60Hz) | 2.1A | 4.2A | 4.6A | |
| Cat. No. | AAH26016U | AAH26026U | AAH26036U | |
Forced Convection Ovens
General model (OF3/H)
for simple and quick control
Bright VFD display and quick adjustable dial knob
Designed for offering the simplest control by user-friendly control panel.
Set value and present value are shown on display at once.
Easy adjustable knob for convenient set values and select functions.
Performance
Rapid heating performance up to maximum 300°C
Microprocessor PID control.
Three point temperature calibration / Automatic tuning.
Forced air convection generated by two noiseless and powerful sirocco fans ensures optimal air circulation, temperature uniformity, and short heat-up time.
Adjustable dual slide vents for inner vapor circulation.
Energy efficiency is achieved thanks to optimization of the insulation system.
– Even if the unit is operating at max. temperature, the surface of the unit doesn’t allow high temperatures.
Convenience
Optimum model selection is available according to two different types of control panel.
– Bright VFD display with quick adjustable dial knob. (for OF3/H)
Dual wait on/off timer modes. (1 min. to 99 hr. 59 min.)
Convenient presetting function for 3 most commonly used temperature settings.
Rounded inner chamber corners for easy cleaning and optimal airflow.
Corrosion-resistant incoloy sheath heating element and stainless steel interior.
Threefold tempered-glass window provides clear inside view of the chamber. (optional)
USB port and RS-232 port for external control and data collection.
Casters for easy mobility during installation or relocation.
Safety
Keypad lock function prevents accidental changes during operation.
Automatic run after power interruption.
Over-temperature and over-current protection.
Audible and visible open door alarms.
| General Model | OF3-30 | OF3-45 | OF3-75 | OF3-30H | OF3-45H | OF3-75H | |
| Chamber volume (L / cu ft) | 314 / 11.1 | 450 / 15.9 | 760 / 26.8 | 314 / 11.1 | 450 / 15.9 | 760 / 26.8 | |
| Temperaure | Range (℃ / ℉) | Amb. +10 to 200 / Amb.+18 to 392 | Amb. +10 to 300 / Amb.+18 to 572 | ||||
| Fluctuation 1)at 100℃ (±℃ / ℉) | 0.2 / 0.36 | 0.2 / 0.36 | |||||
| Variation 1)at 100℃ (±℃/℉) | 2.0 / 3.6 | 2.2 / 3.96 | 2.5 / 4.50 | 2.0 / 3.60 | 2.2 / 3.96 | 2.5 / 4.5 | |
| Dimension (W×D×H) | Interior (mm / inch) | 645×750×650 /25.4×29.5×25.6 | 645×750×930 /25.4×29.5×36.6 | 745×850×1200 /29.3×33.5×47.2 | 645×750×650 /25.4×29.5×25.6 | 645×750×930 /25.4×29.5×36.6 | 745×850×1200 /29.3×33.5×47.2 |
| Exterior (mm / inch) | 850x1100x1235 /33.5×43.3×48.6 | 850x1100x1525 /33.5×43.3×60 | 950x1200x1785 /37.4×47.2×70.3 | 850x1100x1235 /33.5×43.3×48.6 | 850x1100x1525 /33.5×43.3×60 | 950x1200x1785 /37.4×47.2×70.3 | |
| Net weight(Kg / lbs) | 200 / 440.9 | 240 / 529.1 | 300 / 661.4 | 200 / 440.9 | 240 / 529.1 | 300 / 661.4 | |
| Shelves | No. of wire shelf(standard / max.) | 2 / 5 | 3 / 8 | 3 / 11 | 2 / 5 | 3 / 8 | 3 / 11 |
| Max. load per shelf(kg / Ibs) | 25 / 55.1 | 25 / 55.1 | |||||
| Electrical requirements (230V, 50/60Hz, A) | 1P, 13.2 | ||||||
| Cat No. | Solid door | AAH18215K | – | – | – | – | – |
| Window door | AAH18315K | – | – | – | – | – | |
| Electrical requirements (380V, 50Hz, A) | 3P, 6.7 | 3P, 9.0 | 3P, 6.7 | 3P, 9.0 | 3P, 10.8 | ||
| Cat No. | Solid door | – | AAH182214K | AAH182314K | AAH192114K | AAH192214K | AAH192314K |
| Window door | – | AAH183214K | AAH183314K | AAH193114K | AAH193214K | AAH193314K | |
1) Technical data according to DIN 12880.
※ CE for 380V, 50/60hz.
Laboratory Oven
Temperature range from ambient +10°C to 250°C.
Microprocessor PID control / Temperature calibration / Automatic tuning.
Forced air convection ensures optimal air circulation, temperature uniformity, and short heat-up time.
Fan speed control by an analog dial prevents powdered samples from blowing away. (optional)
Adjustable dual slide vents for inner vapor circulation.
Convenience
Intuitive control panel with bright LED displays. (0.1°Cresolution)
Dual wait on/off timer modes. (1 min. to 99 hr. 59 min.)
Convenient presetting function for 3 most commonly used temperature settings.
Rounded inner chamber corners for easy cleaning and optimal airflow.
Corrosion-resistant incoloy sheath heating element and stainless steel interior.
Threefold tempered-glass window provides clear inside view of the chambers. (optional)
RS-232 interface for external control and data collection.
Safety
Keypad lock function prevents accidental changes during operation.
Automatic run after power interruption.
Over-temperature and over-current protection.
Audible and visible open door alarms.
| Model | OF-02G | OF-12G | OF-22G | |
| Chamber volume (L / cu ft) | 60 / 2.1 | 102 / 3.6 | 151 / 5.3 | |
| Temperature | Range (℃ / ℉) | Amb. +10 to 250 / Amb. +18 to 482 | ||
| Fluctuation1) ,at 100℃ (±℃ / ℉) | 0.5 / 0.9 | 0.6 / 1.08 | 0.8 / 1.44 | |
| Variation1),at 100℃ (±℃ / ℉) | 1 / 1.8 | 1.3 / 2.3 | 1.7 / 3.1 | |
| Dimension (W×D×H) | Interior (mm / inch) | 400×360×420 / 15.7×14.2×16.5 | 480×410×520 / 18.9×16.1×20.5 | 550×460×600 / 22×18×23.6 |
| Exterior (mm / inch) | 577×642×760 / 22.7×25.3×30 | 657×692×870 / 25.9×27.2×34.3 | 727×742×974 / 28.7×29.2×38.3 | |
| Net weight (Kg / lbs) | 53 / 117 | 63 / 139 | 72.5 / 160 | |
| Electrical requirements (230V, 50 / 60Hz) | 4.4A | 6.1A | 7.4A | |
| Cat. No. | AAH12155K | AAH12165K | AAH12175K | |
| Electrical requirements (120V, 50 / 60Hz) | 6.8A | 8.4A | 10.1A | |
| Cat. No. | AAH12156U | AAH12166U | AAH12176U | |