Cooled incubator compressor ICP110


This environmentally-friendly incubator is cooled with climate-friendly CO2. Thanks to the excellent thermodynamic properties of the refrigerant CO2 (R744) and the finely adjusted control technology, the ICPeco cooled incubator is both powerful and high-precision. Without critical temperature overshoots, it keeps the temperatures exactly at the setpoint.

Deal for ramp operation with rapid temperature changes during incubation, breeding or storage.

With the help of our model selection, with dimensioned model sketches and extensive technical data for
download, you can find the right cooled incubator ICP for your needs. For small volumes and for work
predominantly in the proximity of the ambient temperature, the Memmert Peltier-cooled incubator is
recommended. Flexibility and technical features of our appliances meet all possible needs. Put us to the test!

Setting temperature range: -12 to +60 °C
Working-temperature range: from -12°C up to +60°C (Optimum performance of cooling aggregate at an ambient temperature of
+16°C up to +34°C. Not suitable for long-term storing at sub-zero temperatures. During permanent
operation, the glass door may ice over.)
Setting accuracy: temperature 0.1 °C
Temperature sensor: 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an
Control technology
ControlCOCKPIT: TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition
TFT-colour displays.
Language setting: German, English, Spanish, French, Polish, Czech, Hungarian
Timer: Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function: SetpointWAIT the process time does not start until the set temperature is reached
Calibration: three freely selectable temperature values
adjustable parameters: temperature (Celsius or Fahrenheit), fan speed, programme time, time zones, summertime/wintertime
Documentation: programme stored in case of power failure
Programming: AtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port
Temperature control: mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating
approx. 10°C above nominal temperature
Temperature control: over- and undertemperature monitor TWW, protection class 3.3 or adjustable temperature limiter
TWB, protection class 2, selectable on display
AutoSAFETY: additionally integrated over- and undertemperature protection “ASF”, automatically following the
setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating is
switched off in case of overtemperature, compressor in case of undertemperature
Autodiagnostic system: for fault analysis
Alarm: visual and acoustic
Heating concept
Air jacket: air jacket heating system for gentle all-around heating
Heating concept: no drying-up of the load caused by the cooling device due to separation of thermal jacket from interior
Cooling: energy-saving use of CFC-free cooling/heating system (refrigerant R134a)
Defrosting: highly efficient automatic defrosting system

Standard equipment
Door: fully insulated stainless steel door with 2-point locking (compression door lock)
Internals: 2 stainless steel grid(s), electropolished
Works calibration certificate: for +10°C and +37°C
Door: inner glass door
Stainless steel interior
Dimensions: w(A) x h(B) x d(C): 560 x 480 x 400 mm (d less 33 mm for fan)
Volume: 108 l
Max. number of internals: 5
Max. loading of chamber: 150 kg
Max. loading per internal: 20 kg
Textured stainless steel casing
Dimensions: w(D) x h(E) x d(F): 745 x 1233 x 584 mm (d +56mm door handle)
Installation: on lockable castors
Housing: rear zinc-plated steel
Electrical data
Voltage: 230 V, 50 Hz
Electrical load: approx. 1200 W
Electrical load:115 V, 50/60 Hz approx. 1200 W
Ambient conditions
Set Up: The distance between the wall and the rear of the appliance must be at least 15 cm. The clearance
from the ceiling must not be less than 20 cm and the side clearance from walls or nearby appliances
must not be less than 5 cm.
Ambient temperature: 15 °C to 28 °C (up to 34 °C with limited temperature range)
Humidity rh max.: 70 %, non-condensing
Altitude of installation max. : 2,000 m above sea level
Overvoltage category: II
Pollution degree: 2

Packing/shipping data
Transport information The appliances must be transported upright
Customs tariff number 8419 8998
Country of origin Federal Republic of Germany
WEEE-Reg.-No. DE 66812464
Dimensions approx incl.
w x h x d: 880 x 1410 x 810 mm
Net weight approx. :113 kg
Gross weight carton approx. :141 kg