Gel Timer
$0.00
These gel timers are perfect for determining the gel time of resinous plastics, adhesives, crying oils, two component elastomers, and paints. A low torque, synchronous motor rotates a specially shaped stirrer in the catalyzed resin or elastomer. As gelation occurs, drag exeeds torque and the motor stalls. This signals an electronic circuit which stops the clock and activates a flashing lamp. The gel time will show on the LCD display.
- Simple to operate – place the material sample in the cup, insert the wire stirrer, set the counter to 0 and switch on the unit
- No mess – No tools required – No cleanup • Motor can remain stalled overnight without damaging the unit
- Choose from three different models:
- Basic Version
- “Hot Pot” model determines gel time at temperatures up to 350 °F with a simple rheostat temperature controller
- “StablTemp Hot Pot” model determines gel time at temperatures up to 350 °F with an electronic proportioning control which regulates the set temperature with virtually no drift or variation.
|
Accessories Gel Timer
|
|
Cat. No.
|
Description
|
| PM-1810 |
Paper Clip Liners for Standard Gel Timer (pk of 50) |
| PM-1807 |
Wire Stirrers (pk of 100) |
| PM-1809 |
Aluminum Cup Liners for Hot Pots only (pk of 100) |
|
Technical Specification for Gel Timer
|
|
Cat No.
|
Description
|
Weight
|
Oerating temprature
|
Thermometers
|
| PM-1800 |
Standard Gel Timer, 120VAC/60Hz |
4 lbs (2.2 kg) |
Room Temperature |
|
| PM-1801 |
Standard Gel Timer,
220VAC/50Hz |
4 lbs (2.2 kg) |
Room Temperature |
|
| PM-1802 |
‘Hot Pot’ Gel Timer,
120VAC/60Hz |
4 lbs (2.2 kg) |
150 – 350 °F = 5 % of setting |
Bimetal stem-type |
| PM-1803 |
‘Hot Pot’ Gel Timer,
220VAC/50Hz |
4 lbs (2.2 kg) |
150 – 350 °F = 5 % of setting |
Bimetal stem-type |
| PM-1804 |
‘StablTemp Hot Pot’ Gel Timer, 120VAC/60Hz |
4 lbs (2.2 kg) |
140 – 350 °F = 1 % of setting |
Bimetal stem-type |
| PM-1805 |
‘StablTemp Hot Pot’ Gel Timer, 220VAC/50Hz |
4 lbs (2.2 kg) |
140 – 350 °F = 1 % of setting |
Bimetal stem-type |
Comes complete with:
Gel timer
10 Stirrers
Operating instuctions |
Maximum Recording Time |
9,999 minutes, 59 seconds (167 hrs) |
| Minimum Recording Time |
1 second |
| Stir Speed |
20 rpm, = 2 % accuracy |
| Dimension |
7.5 x 9.0 x 5.5 in (191 x 227 x 140 mm) |
