Standard sand I&II
$0.00
#Standard Sand I and II (DIN 1164/58) # DIN 1164/58 standard sand I and II
Details
- Since 1958 to 1978 this testing sand had been used for the production-monitoring of cement according to DIN 1164/58. For the strength development determination 3 cement mortar prisms (4 x 4 x 16 cm³) were prepared. Mix design: 450 g Cement, 450 g Standard Sand I (fine), 900 g Standard Sand II (coarse) and 270 g water.
- The CEN Standard Sand DIN 1164, 1958 edition, is (naturally) rounded, quartz-rich Sand. Grain size I is ground Sand. The production-monitoring was operated by Normensand GmbH itself. In addition, the product was monitored by MPA Stuttgart. The test sieves used correspond to the regulations of DIN ISO 3310-1:2001-09.
- Even today, the two individual grains (grain size I: fine, grain size II: coarse) are used for certain tests.
Specification
- packing in paperbag
- bag with 50 kg grain size I (fine)
- bag with 50 kg grain size II (coarse)
- quartz-rich sand (naturally rounded)
- grain size I: ground sand
grain size I (fine) |
|
|
|
test sieve cloth |
0,063 |
0,090 |
0,200 |
residue |
≥ 70 – ≤ 80 |
≥ 60 – ≤ 70 |
≥ 8 bis ≤ 14 |
grain size II (coarse) |
|
|
test sieve cloth |
0,63 |
1,250 |
residue |
≥ 95 |
≤ 1 |
Other products-
- CEN Standard Sand EN 196-1
- CEN Reference Sand
- Analyses Sieves Test Sand
- Test Dust