Sulfur mortar

$0.00
Sulfur mortar BP 18-416, SNL Type B sulfur mortar type BP 18-416

Type b sulfur mortar according to NF P 18-416#Sulfur mortar type BP 18-416 #SNL Type B sulfur mortar type BP 18-416

SNL TYPE B sulfur mortar is a ready-to-use hot-melt mortar intended for surfacing high and very high performance concrete and mortars. Laboratory tested on concretes up to 120 MPa.

It is guaranteed by SNL  for the surfacing of specimens with strengths between 0 and 100 MPa.

Traditional surfacings are made from a mixture of 60% sulfur and 40% sand, having a compressive strength close to 24 M Pa, that is to say very far from those of BHP and BTHP. It follows, when such concretes are surfaced with this mixture, differences between the real value and the value obtained, that is to say values ​​of mechanical resistance far from reality.

Type B SNL mortar  is a sulfur-based composition, easy to use, hot-moldable and having high mechanical resistance when cold, which makes it possible to minimize the standard deviations between specimens of the same series and to obtain the values ​​of mechanical resistance closest to reality.

AREAS OF APPLICATION

Surfaces of all mortar or concrete specimens with mechanical strengths of up to 100 MPa. Strongly recommended for specimens with strengths greater than 60 MPa.

Manual
  • Type B SNL mortar  must be heated to a temperature between 130 and 135 ° C in order to have the desired fluidity. This temperature must be maintained during use; lower or higher temperatures lead to a thicker product.
  • Type B SNL mortar must be well homogenized before and during use in order to avoid sedimentation of the charges (note that this also applies to the traditional surfacing mixture: sulfur / sand).

CHARACTERISTICS

  • Nature: powder
  • Color: greenish yellow
  • Apparent density: 0.8 to 0.9

CONDITIONING

10kg buckets.

CONCRETE LABORATORY OTHERS RELATED PRODUCTS

  • Sulfur in lentils
  • Sand for sulfur sand mixture
  • Sand MBE (Equivalent Concrete Mortar)
  • Sand standards according to DIN or ASTM
  • UKAS 22 standard sand
  • Sand EN 480-13
  • 0/20 sand standardized to EN 1766 2000-03
  • Sand on demand
  • Sulfur mortar Type BP 18-416
  • Sulfur mortar Type AP 18-416
    Sulfur mortar NF 12390-3
  • Sulfur flower
  • Supplier and seller in Bangladesh is Elite Scientific & Meditech Co.
  • For any queries please visit us- www.elitetradebd.com
Categories: