Built around the 7010 Series Triple Quadrupole GC/MS, the Dioxins Food and Feed Analyzer provides the sensitivity required for trace dioxin and dioxin-like PCB detection. With up to ten times more sensitivity than competitive triple quadrupole GC/MS analyzers, it allows you to observe below EU regulated levels of dioxins for ultimate confidence in your results. The Dioxins analyzer reduces method development time allowing your analysts to focus on calibration, validation and the analysis of real world samples.
The Agilent Biogas Analyzer is a fast and efficient analysis technology pre-configured for your biogas sample. Depending on your sample, you can choose between the 490 Micro GC Biogas Analyzer for analysis of pure biogas, or the 490 Micro GC Biogas Analyzer Extended for when biogas is mixed with other hydrocarbon streams.
The analysis of sulfur-containing compounds and nitrosamines at low concentrations is a critical step in quality control and assurance throughout the energy and chemical industry. Ubiquitous in refinery and petrochemical products, sulfur containing hydrocarbons and contaminants in concentrations as low as parts-per-billion (ppb) can corrode hardware, and permanently poison expensive catalysts used in downstream processes.
To help manufacturers monitor their processes Agilent Technologies produces a series of Sulfur and Nitrosamine Analyzers that incorporate selective, sensitive detectors to reliably detect trace level contamination. Choose from standard configurations as well as custom analyzers designed to meet your specific quality assurance requirements.
The 850-DS Dissolution Sampling Station offers the latest capabilities for centralizing laboratory workflow of sample transfer, filtration and collection. By managing unattended dissolution sampling and automated sample archiving for future HPLC or UV analysis, the 850-DS frees up analysts’ time while eliminating sampling errors associated with manual sampling.
The Agilent 1100 Series LC/MSD offers you the sensitivity, selectivity, and depth of molecular information inherent in mass spectrometry—in a package that is rugged, reliable, and surprisingly easy to learn, operate, and maintain.
This system is in very nice condition and comes fully tested. It is being offered at a fraction of the cost of a comparable new system.
Features:
Specifications:
The Agilent 1200 Series HPLC System is a must have for an analytical lab. The modular and compact design of the HPLC System allows users to configure to their needs while taking up a minimal amount of bench space. This HPLC system features a powerful combination of speed, resolution, and sensitivity with a high throughput and improved quality of results. The 1200 series HPLC system uses a plug and play modular system, so modules automatically hand shake with each other, or can be used separately depending on your needs. The Agilent 1200 Series HPLC instrument uses a dual lamp design and temperature control through diode array detectors to bring you outstanding sensitivity. This is also partnered with a high pressure binary pump for flexible solvent delivery, and a degasser for stable flow rate. The thermostat auto sampler of this high-performance liquid chromatography machine has a temperature range of between 4-40°C, as well as a high-performance auto sampler with an injection range of between 0.1-100 µl.
The Agilent 1200 Series HPLC System consists of a G1379B Vacuum Degasser, a G1312A Binary Pump, a G1329A Autosampler, a G1330B ALS Thermostat, and a G1315D DAD Detector. The Diode Array Detector allows for flexible slit settings for a range of 1 to 16 nm, letting you customize the desired sensitivity, linearity and spectral resolution. This HPLC System, built for purification and analysis, also comes with a controlling PC installed with Chemstation software to help manage and interpret large amounts of data collected from the system. TheChemstaion software is windows based, and user friendly and gives you level 5 control of your instrument with built in diagnostics and early warnings for maintenance. Thanks to the scalability and easy maintenance of this LC System, this work horse will rise to meet your needs for years to come.
Agilent 1200 Series HPLC System Specifications:
| Thermostated Autosampler | |
| Temperature Range | 4-40°C in 1° increments |
| DAD Detector | |
| Detection type | 1024-element photodiode array |
| Light source | Deuterium and tungsten lamps |
| Wavelength range | 190 – 950 nm |
| Short term noise | < ± 0.8 x 10 -5 AU at 254 nm and at 750 nm |
| Drift | < 0.9 x 10 -3 AU/hr, at 254 nm |
| Linear absorbance range | > 2 AU (upper limit) |
| Wavelength accuracy | ± 1 nm Self-calibration with deuterium lines, verification with holmium oxide filter |
| Wavelength bunching | 1 – 400 nm Programmable in steps of 1 nm |
| Slit width | 1, 2, 4 , 8, 16 nm Programmable slit |
| Diode width | < 1 nm |
| Flow cell Standard | 13-µL volume, 10 mm cell path length, 120 bar (1760 psi) pressure maximum |
| Vacuum Degasser | |
| Flow rate | 0-5 ml/min per channel
5-10 ml/min at reduced degassing performance |
| Number of channels | 4 |
| Internal volume per channel | Typically 1 ml per channel |
| Materials in contact with solvent | PTFE – PEEK |
| pH range | 1 – 14 |
| Analog output (AUX) | For pressure monitoring, range 0 – 3 V |
| Binary Pump | |
| Hydraulic system | Dual plunger in series pump with proprietary servo-controlled variable stroke drive, floating plungers and active inlet valve |
| Setable flow range | 0.001 – 5 ml/min, in 0.001 ml/min increments |
| Flow range | 0.1 – 5.0 ml/min |
| Flow accuracy | ± 1% or 10 µl/min whatever is greater |
| Pressure Operating Range | Setpoints 0.001 – 5 ml/min, in 0.001 ml/min increments |
| Pressure pulsation | < 2 % amplitude (typically < 1 %), at 1 ml/min isopropanol, at all pressures > 1 MPa |
| Recommended pH range | 1.0 – 12.5, solvents with pH < 2.3 should not contain acids which attack stainless steel |
| ALS Auto Sampler | |
| Injection range | 0.1 – 100 µl in 0.1 µl increments |
| Replicate injections | 1 – 99 from one vial |
| Precision | < 0.25% RSD from 5 – 100 µl, < 1% RSD 1 – 5 µl variable volume |
| Minimum sample volume | 1 µl from 5 µl sample in 100 µl microvial, or 1 µl from 10 µl sample in 300 µl microvial |
| Carryover Typically | < 0.1%, < 0.05% with external needle cleaning |
| Sample viscosity range | 0.2 – 50 cp |
| Replicate injections per vial | 1 – 99 |
| Sample capacity | 100 × 2-ml vials in 1 tray 40 × 2-ml vials in ½ tray 15 × 6-ml vials in ½ tray Agilent vials only) |
| Injection cycle time | Typically 50 s depending on draw speed and injection volume |
| General | |
| Dimensions | 14x18x33″ |
| Power | 100-120/220-240 V, 50/60 Hz |
Included
