elitetradebd,elitescientific,elitescientific&meditech,elitescientific&meditechco,elitetrade,elite,elitescientificco,elitechemicalsco,elitewebsite,elitelabequipments,elitelaboratories,labgoods,bdscientific,scientificcoinbd

Download Tag: Italy

Microscope binocular head B 382PHi ALC (Brightfield) Optika Italy

$275,000.00 
Microscope Binocular Head B 382PHi ALC (Brightfield)
Binocular 360°rotating 30° inclined
Eyepiece: Wide Field 10X/20 mm
Model: B 382PHi ALC
Brand: OPTIKA
Country: ITALY

Microscope Binocular Head (Brightfield) B 382PHi ALC Optika Italy

Brightfield binocular microscope with IOS N-PLAN (Infinity Corrected) objectives, rackless stage and combining the exclusive X-LED3 with ALC (Automatic Light Control) for great-looking, rich and high-quality view.
Observation mode: Brightfield.
Head: Binocular, 30° inclined, 360° rotating (when ALC cable is unplugged).
Interpupillary distance: Adjustable between 48 and 75 mm.
Dioptric adjustment: On the left eyepiece tube.
Eyepieces: WF10x/20 mm, high eye-point and secured by screw.
Nosepiece: Quintuple revolving nosepiece, rotation on ball bearings.
Objectives:
IOS N-PLAN 4x/0.10 IOS N-PLAN 10x/0.25
IOS N-PLAN 40x/0.65 IOS N-PLAN 100x/1.25 (Oil/Water)
All with anti-fungus treatment.
Specimen stage: Double layer rackless mechanical stage, 233×147 mm,
78×54 mm X-Y range.
Focusing: Coaxial coarse (adjustable tension) and fine focusing mechanism
with limit stop to prevent the contact between objective and specimen.
Condenser: Abbe N.A. 1.25, with objective-coded iris diaphragm,
focusable and centerable.
Illumination (Fixed Koehler type): X-LED3 with white 3.6 W LED
(6,300K) and brightness control. ALC system.
Multi-plug 100-240Vac/6Vdc external power supply
Categories:  

Microbiological air sampler

$0.00 
Active Sampler for Microbiological Air Sampling “Microflow Alfa”
MICROFLOW 90 C
Flow Rates: 30-600-90-100-120 l/ min
Model: MICROFLOW 90/C
Brand: AQUARIA
Country: ITALY

Microflow α has been developed for bio-aerosol (eg.: fungal spores, bacterial cells, etc.) sampling. This type of sampling allows to verify and measure the presence of microorganism potentially harmful, in order to perform an exposure assessment, and identify the source of pollution to adopt a containment plan.

Sampling principle: The sample is drawn through a pierced sampling head at constant speed for a variable time, depending on the nature of the environment to be monitored. The flow air is conveyed on the surface of a plate containing the culture media suitable for the microbiological research desired. Once the sampling is finished, the plate is removed and put under incubation. At the end of incubation time it will be possible to count the developed colonies for cm2 and to evaluate the contamination level.

Application fields:

  • security restricted areas
  • hospital
  • pharmaceutical industries
  • food and dairy company
  • air treatment systems
  • water purification implants
  • working environments subject to controls as required by D.L. 155/97 (HACCP) and D.L. 81/2008

The instrument has been developed in compliant with:

  • norm UNI EN ISO 14698-1:2004
  • method UNICHIM n°1962-2


TECHNICAL FEATURES

  • Chassiein disinfectable polyurethane; furthermore, the inside of the chassis is clad with an antibacterial silver paint
  • Alphanumeric displayfor the menu presentation and displaying all “step by step” operations. The different menus can be visualized in one of the following five languages: Italian, English, French, German and Spanish
  • Displayalarm warning (i.e. low battery level, etc.)
  • Control panelwith membrane keyboard
  • Sampling headin anodised aluminium, that can be sterilised by autoclave, with twist lock fixing
     Microflow α 60: sampling head with 219 conical holes (ø 1 mm)
         • Microflow α 90c: sampling head with 380 conical holes (ø 1 mm)
  • Anodised and sterilisable aluminium plate supportstructure equipped with steel spring plate holders
    • Microflow α 60:can host a contact plate with diameter of 60 ± 2 mm
    • Microflow α 90c:can host a Petri dish with diameter of 90 ± 2 mm
    • Microflow α 60/90c:can host both Petri dish with diameter of 90 ± 2 mm and contact plate with diameter of 60 ± 2 mm, simply replacing the mechanical unit
  • BrightON/OFF LEDs for checking the instrument activity
  • Flow rate:30 – 60 – 90 – 100 – 120 l/min. The flow rates are calibrated using a calibration system, which has been developed by Polytechnic of Milan – Department of Aerospatiale engineering (report n°377/2003) and certificated by I.N.RI.M. of Turin (certificated n°10-0114-01/2010)
  • Calibration control function(with dedicated key)
  • The quantity of sampled airis programmable from 1 litre up to 2000 litres with steps of 1 litre. Furthermore, it is possible to set a manual sampling in case it is necessary to suck for an indeterminate period.
  • Possibility to set a sequential samplingas indicated by guidelines of ISPESL
  • Set of delayed start
  • Remote controlfor the start of the sampling (able to pass through the glass)
  • Memorizeof 160 samplings (date, time, sampled volume and sampling flow rate) and USB port to download the data on the PC. WINDOWS compatible (in compliance with GLP – Good Laboratory Practice – and GMP – Good Manufacturing Practice)
  • Rechargeable battery(without memory effect) with approximately 4 – 5 hours of autonomy (for a continuous sampling with a flow rate of 1,5 l/s)
  • Battery charger(220 V) with a complete recharge in approximately 4 hours
  • Possibility of power supplyfor short periods
  • In compensatedmodels: compensation of the flow rate at the variation of the battery supply voltage and contingent load loss due to plates with different dimensions from the calibration plate. With these models it is possible to use any kind of Petri Plate in the market. In case that the compensation system is not able to keep the flow rate constant, the system switches on overflow mode and the instrument will lockup.
  • Dimensions:310 x 130 x 170 mm (length x width x high)
  • Weight:1,9 kg
  • Operating conditions:
      Temperature: 0 – 50°C
    Relative humidity: 20- 80% without condense

The kit is complete of:

  • carrying case
  • MICROFLOW air sampler
  • additional alluminium samplig head (only for Microflowa 60 and 90c kit)
  • battery charger
  • IR remote control
  • Torch pen
  • User manual in English language
  • Test report

ACCESSORIES

  • Tripod type Master, high max  3,66 m
  • Stainless steal sampling head
  • USB interfacefor PC data download, complete of software for the transmission and data manage in compliance with UNICHIM manual n°1962
  • Accessory for per sampling in conduct not under pressure 
  • Accessory for thepositioning of the sampler  in vertical position 
  • Digital calibration kit“Microcontrol” composed by a digital differential pressure indicator, connection tube and conversion table

Supplier in Bangladesh:Elite Scientific and Meditech Co.

Web address:www.elitetradebd.com

Face book:https://www.facebook.com/elitetradebd

LinkedIn:https://www.linkedin.com/in/elitetradebd/#

Twitter:https://twitter.com/elitetradebd

Instagram:https://www.instagram.com/elitetradebd/

Categories:  

ABB Air Circuit Breaker (ACB) 6300A Full Size 150kA 4 Poles

$0.00

Specification: 

  • Air Circuit Breaker-EMAX2 (Fixed)
  • 415 Volts, 3 Phase, 50Hz, 4Poles
  • Current Rating: 6300A Full Size
  • Short Circuit Breaking Capacity: 150kA
  • Phase: 3P
  • Code:1SDA072021R1
  • Description: E6.2V/f 6300 Ekip Dip LI F HR 4P
  • Origin: ABB, SACE S.p.A., ITALY
Categories:  

ABB Air Circuit Breaker (ACB) 6300A 150kA 4 Poles

$0.00

Specification: 

  • Air Circuit Breaker-EMAX2 (Fixed)
  • 415 Volts, 3 Phase, 50Hz, 4Poles
  • Current Rating: 6300A
  • Short Circuit Breaking Capacity: 150kA
  • Phase: 3P
  • Code:1SDA071931R1
  • Description: E6.2V 6300 Ekip Dip LI F HR 4P
  • Origin: ABB, SACE S.p.A., ITALY
Categories:  

Jolting apparatus

$0.00
MAIN FEATURES
  • Easy verification of compliance to standards: weight distribution, dimensions etc.
  • Rigid structure assuring stability and no distortion
  • High resolution graphical display 128×80 pixels and 6 keys membrane keyboard
  • Double test procedure: it is possible to set the target revolutions / drops or the total working time
  • Rapid mould lock and release system
  • Noise reduction cabinet available as option

This machine, used to compact the 40x40x160 mm cement prisms in the mould, has been developed to fulfill precisely the EN and ISO standards. Each single requirement as, for example, weigh distribution, dimensions, structural design and working cycle is individually checked and verified.
Prism moulds, feed hopper, scrapers and glass plate are not included and have to be ordered separately. See accessories.

Specification

  • Highly rigid structure, joints between main parts (table – arms – base) easily removable to check weights
  • Drop height: 15 mm. Since the mechanical parts are subject to wear and tear and this height tends to change with use, the hammer has an adjustable height, making it possible to restore the initial drop height
  • Motor: power: 250 W, 60 r.p.m.
  • High resolution graphical display 128×80 pixels and 6 keys membrane keyboard
  • 8 languages can be set: Italian, English, French, Spanish, Polish, Portuguese, Romanian and Cesky
  • Double test procedure: it is possible to set the target revolutions / drops or the total working time
  • Overall dimensions (lxdxh): 310x1000x385 mm
  • Weight approx.: 55 kg

Categories:  

Cleveland flash tester

$0.00

Used for determining the flash and fire point of petroleum products. It consists of a brass cup mounted on an electric heater with temperature controller. Conforming with the CE European directive, is supplied complete with double line-fuse, hot plate control system and thermometer -6 +400°C.

  • Power: 600 W
  • Weight approx.: 5 kg
Categories:  
Assalamu Alaikum, Welcome to our company
Scan the code