Elite Scientific and Meditech Co.

elitetradebd@gmail.com

+8801711196910

elite, elitetrade, elitetradebd, elitescientific, elitebd, elitescientificbd, elitescientificco, elitescientificandmeditechco, elitescientificmeditechco, elitescientific&meditechco, elite scientific, elite scientific meditech co, elite scientific & meditech co, elite scientific and meditech co, scientific company in bangladesh, be scientific co, Bangladeshi scientific co, scientific products seller in Bangladesh, Scientific products seller in bd, scientific products supplier in bd, laboratory products selller in bd, lab goods seller in bd, Chemicals supplier in bd, Chemicals supplier in Bangladesh, glassware seller in bd, scientific goods price in bd, Tender goods seller in bd

Bishop pore pressure machine

$0.00

Introduction

Consists of panel for wall mounting on which are fitted wall mounting on which are fitted 1.0 to 10Kg/cm2 x0.1Kg/cm2 a pressure gauge, Bourdon tube 20cm dia.

Manometer

Glass U-tube manometer for measuring low positive pore pressures negative pore pressures and checking zero error of pressure gauge. It is provided with a mercury trap (Mercury supplied at extra cost ) Null indicator made out of clear transport perspex with mercury trap and cursor to indicate the mercury level.

Burette

50 ml Burette for measuring the volume change in the soil specimen. Pressure pump fitted with four sleeve packed valve, Operated by means of a hand wheel on the end of the piston rod which is threaded thru the pump cap and gives a smooth, fine adjustment of pressure copper coil and water reservoir.

The unit is tested against leaks upto 10Kg/cm2

More products in Soil Testing Equipment

#Auto level Consolidometer #Bishop Pore pressure apparatus #Coarse Sieves #Cone Penetrometer #Consolidation Test Apparatus #Constant Oil and Water Pressure Apparatus #Digital C.B.R. Apparatus #Direct Shear Apparatus – Digital Model #Direct Shear Apparatus – Hand Operated #Direct Shear Apparatus – Motorised Model #Direct Shear Apparatus Large Size #Dynamic Cone Penetration Apparatus #Extractor Frame – Hydraulic #Extractor Frame – Universal #Field Density Test Apparatus – Core Cutter Method #Field Density Test Apparatus – Sand Replacement #Field Type C.B.R. Apparatus #Fine Sieves #High Speed Stirrer #Infrared Moisture Balance #Laboratory C.B.R. Apparatus #Laboratory Vane Shear #Lateral Pressure Assembly #Liquid Limit Device #Marsh Cone Funnel #Plastic Limit Device #Plate Bearing Test Apparatus #Proctor Compaction Apparatus #Proctor Needle – Spring Type #Proving Ring #Rapid Moisture Meter #Relative Density Apparatus #Sampling Outfits Augers #Sand Equivalent Value Test Apparatus #Shrinkage Limit Device #Sieve Shaker – Gyratory #Sieve Shaker – Hand Operated #Sieve Shaker – Rotap #Sieve Shaker – Table Model #Soil Hydrometer #Soil Permeability Apparatus #Standard Penetration Test Kit #Swell Test Apparatus #Triaxial Load Frame #Unconfined Compression Tester #Universal Automatic Compaction Apparatus #Bishop pore pressure apparatus

Categories:  

Extensometer_ Lateral

$0.00

Product Specification

Application Laboratory
Material Stainless Steel
Carrying Case Material Wood
Display Analog
Dial Gauge 0.002 x 10 mm
Specimen Diameter 150 mm
Specimen Height 300 mm
Categories:  

Hydraulic jack _ 10 to 200 Ton

$0.00

Introduction

Capacity : 10 Tonne, 20 Tonne, 25, Tonne, 50 Tonne, 100 Tonne, 150 Tonne and 200 Tonne.

Hand Operated :

Hydraulic Jacks are of multipurpose utility i.e. application of loads while engaged in field investigation, determination of load carrying capacity of piles in the field, tensioning of wires in pre-cast structures, loading of members of any structures for deformation characteristics. For applying loads for various test in field or laboratory. Hydraulic Jack hand operated with separate pumping units. These jacks are portable available in various capacities. The pumping unit is connected to the hydraulic jack by means of a flexible connecting pipe 2 meter long. The jack is fitted with lifting handles for easy transportation. The approximate lift of the ram is 90 to 120 mm. The pumping unit is a single plunger type with detachable handle. The unit is fixed on a channeled base which is fitted with lifting handles. A pressure release valve is provided on the pumping unit. The load is indicated on a 15 cm dial hydraulic pressure gauge of appropriate capacity which can be detached from the pump when not in use. The least count of the calibrated dial will be according to the capacity of the gauge (Normally 100 divisions for full capacity). Lift of ram – 150 mm.

Capacity : #10 Ton #20 Ton #25 Ton #50 Ton #100 Ton #150 Ton #200 Ton

Categories:  

Flexural tester

$0.00

Introduction

Although generally not such an important property of concrete than compressive strength, tensile strength values are often important to know when the concrete used free of reinforcement and may be subjected to some tensile force. The test method essentially involves applying a load at the centre of a beam of concrete supported at its ends. The load required to break the specimen is then recorded.

Salient Features:

The machine consists of a motorized load frame. The lower platen has two rollers, the distance between which is adjustable. For 150 mm x 150 mm x 700 mm beam, the centre distance between the rollers is 600 mm, while it is 400 mm for beams of size 100 mm x 100 mm x 500 mm. The upper platen has also a pair of rollers whose distance adjustable. It is 200 mm centre to centre, for 150 mm x 150 mm x 700 mm size beam and 133 mm for 100 mm x 100 mm x 500 mm size beam. Total capacity of the machine is 100 KN. 150mm dia pressure gauge of 0-100 KN x 1 KN least count to indicate load is fixed on the load frame. A separate electrically cum hand operated pumping unit housed in a cabinet is supplied. On/Off switch and a slow/fast lever to control rate of loading are fitted on the front panel of the pumping unit. A facility for hand operation is provided. A micro switch and relay fitted inside the pressure gauge protect the unit from over loading.

Hand operated version consists of a load frame. A small hand pumping unit is attached to the load frame. Since this is a hand operated light weight machine. It is useful for field laboratory also.

Optional Accessories (at extra cost):

  • Spare Oil seal
  • Hydraulic Oil ( tin of 5 ltrs)
  • Beam Mould 10 X 10 X 50 cm
  • Beam Mould 15 X 15 X 60 cm
  • Beam Mould 15 X 15 X 70 cm
  • Beam Mould 15 X 15 X 75 cm
  • Trowel
  • Concrete Scoop

#Flexural testing machine #Flexural machine, Flexural tester, Concrete Flexural machine

Categories:  

Concrete extensometer

$0.00

Introduction

The unit consists of two movable frames pivoted at one end. The lateral extensometer is fixed to the specimen with the help of tightening screws. The lateral extension is indicated on a dial gauge of 0.002 mm x 12 mm travel. The extension is magnified 2.5 times and the dial gauge readings are to be divided by 2.5 to get the exact readings. A spacer strip is provided to initially set the dial gauge and can be removed after initial setting. Supplied in a wooden carrying case.

#Extensometer #Concrete extensometer

Categories:  

Concrete thermometer

$0.00

Introduction

Temperature of concrete at the time of placement is important to control and to avoid many possible difficulties. In hot climates, it is important to measure the temperature of the fresh concrete to ensure it is not too hot, which could cause flash setting and rapidly reducing workability. Measurements are generally taken at the point of placement.

General Description & Specifications

The Concrete Thermometers are available in following types.

  • Mercury in Glass type or Alcohol in Glass type
  • Dial type
  • Digital type.

#Thermometer #Concrete thermometer # Lab concrete test thermometer #Concrete temperature meter #Concrete temperature tester

Categories:  

Concrete test hammer

$0.00

Introduction

Often, existing concrete structures will need to be examined and tested to ensure the concrete remains of adequate strength and durability. Rebound hammer surveys can be conducted to provide a rough estimate of concrete strength, where it is not possible to determine this by more accurate means such as core extraction and testing.

The test involves using a special rebound hammer, which measures the recoil of a piston against the concrete surface when a standard force is applied. This recoil can then be correlated approximately to concrete strength.

General Description & Specifications

The rebound hammer consists of a barrel in which is housed a hammer mass attached to an impact spring which slides on a guide bar. A plunger is attached to the guide bar which is pressed against the surface to be tested. As the piston is pressed against the surface to be tested, on reaching the compressive strength, the hammer mass is released and rebounds to a certain extent, according to the strength of the surface, which is indicated by a rider on a calibrated scale. A lock button fixed on the body of the hammer lock the rider in place and the rider can be reset to zero Position by using the same button. The equivalent compressive strength can be computed from the chart supplied. It is suitable for specimen of compressive strengths 100-700Kg/cm. The instrument, complete with a grinding stone for polishing the test surface, is supplied in carrying case.

Optional Accessory

Calibrating Anvil

Similar others product

#Carbonation chamber #Thermal conductivity test apparatus of AAC Blocks #Freeze-Thaw Chamber (ASTM C666) #Accelerated Curing Tank #Air Enterainment Meter #Compaction Factor Apparatus #Digital Compression Testing Machine #Fully Automatic Concrete Cube Compression Testing Machine #Compression testing machine – Channel Type #Compression Testing Machine – Hand Operated Pillar type #Concrete Mixer – Laboratory Type #Concrete Penetrometer #Concrete Permeability Apparatus #Concrete Test Hammer #Concrete Thermometer #Cube Mould #Cylindrical Molds #Extensometer #Fill Box for SCC Test #Flexural Testing Machine #Flow Table #Hydraulic Jack #J Ring Apparatus #Lateral Extensometer #Longitudinal Compressometer #Needle Vibrator #O Funnel Apparatus #Point Load Index Tester #Slump Test Apparatus #Tile Abrasion Tester #Tile Flexural Testing Machine #U Box #V Funnel Apparatus #Vee Bee Consistometer #Vibrating Table #Volume Change Apparatus #Accelerated Curing Tank #Air Enterainment Meter #Compaction Factor Apparatus #Compression Testing Machine – Digital #Compression Testing Machine – Electrically Operate #Compression Testing Machine – Hand Operated Channel #Compression Testing Machine – Hand Operated Pillar type #Concrete Mixer – Laboratory Type #Concrete Penetrometer #Concrete Permeability Apparatus #Concrete Test Hammer #Concrete Thermometer #Cube Mould #Cylindrical Molds #Extensometer #Fill Box for SCC Test #Flexural Testing Machine #Flow Table #Hydraulic Jack #J Ring Apparatus #Lateral Extensometer #Longitudinal Compressometer #Needle Vibrator #O Funnel Apparatus #Point Load Index Tester #Slump Test Apparatus #Tile Abrasion Tester #Tile Flexural Testing Machine #U Box #V Funnel Apparatus #Vee Bee Consistometer #Vibrating Table #Volume Change Apparatus

Categories:  

Penetrometer for concrete

$0.00

Introduction

This test is used to determine the elapsed time between batching of a concrete sample and when it is deemed by standard methods to have set. The method involves measuring the penetration resistance of a test sample, which has had coarse particles removed at periodic intervals. It is particularly useful, in determining the effect on setting time of admixtures in the concrete, where these may have been introduced specifically to increase the setting time.

It consists of cylindrical spring housing with a plunger attached to the top of the spring. Penetration needle is attached to the other end of the spring housing. The plunger is graduated in 1 kg divisions, to a maximum capacity of 60kg, which can be read with respect to the top end of the spring housing. A set of six needle points with areas of 645, 323, 161, 65, 32 and 16mm2 are provided. Supplied complete in a wooden carrying case.

Pocket Penetrometer

Consists of a needle having face area 3/10 sq.cm. and graduated at a distance of 25mm. The needles point is an integral part of barrel which houses a calibrated spring. The spring is confined in a sleeve. The resistance offered by the concrete mortar is shown on the direct reading scale with a marker ring which holds its position when released. Scale range is 0-50 kg/cm2 when the penetration resistance reaches a value of 35kg/cm2 the concrete is assumed initially set. Supplied complete in a leather carrying case. AS PER ASTM C-403

Other products

#Carbonation chamber #Thermal conductivity test apparatus of AAC Blocks #Freeze-Thaw Chamber (ASTM C666) #Accelerated Curing Tank #Air Enterainment Meter #Compaction Factor Apparatus #Digital Compression Testing Machine #Fully Automatic Concrete Cube Compression Testing Machine #Compression testing machine – Channel Type #Compression Testing Machine – Hand Operated Pillar type #Concrete Mixer – Laboratory Type #Concrete Penetrometer #Concrete Permeability Apparatus #Concrete Test Hammer #Concrete Thermometer #Cube Mould #Cylindrical Molds #Extensometer #Fill Box for SCC Test #Flexural Testing Machine #Flow Table #Hydraulic Jack #J Ring Apparatus #Lateral Extensometer #Longitudinal Compressometer #Needle Vibrator #O Funnel Apparatus #Point Load Index Tester #Slump Test Apparatus #Tile Abrasion Tester #Tile Flexural Testing Machine #U Box #V Funnel Apparatus #Vee Bee Consistometer #Vibrating Table #Volume Change Apparatus #Accelerated Curing Tank #Air Enterainment Meter #Compaction Factor Apparatus #Compression Testing Machine – Digital #Compression Testing Machine – Electrically Operate #Compression Testing Machine – Hand Operated Channel #Compression Testing Machine – Hand Operated Pillar type #Concrete Mixer – Laboratory Type #Concrete Penetrometer #Concrete Permeability Apparatus #Concrete Test Hammer #Concrete Thermometer #Cube Mould #Cylindrical Molds #Extensometer #Fill Box for SCC Test #Flexural Testing Machine #Flow Table #Hydraulic Jack #J Ring Apparatus #Lateral Extensometer #Longitudinal Compressometer #Needle Vibrator #O Funnel Apparatus #Point Load Index Tester #Slump Test Apparatus #Tile Abrasion Tester #Tile Flexural Testing Machine #U Box #V Funnel Apparatus #Vee Bee Consistometer #Vibrating Table #Volume Change Apparatus

 

Categories:  

Compression testing machine_digital

$0.00

Introduction

The digital compression testing machine has been designed to meet the need for a simple, economic and reliable means to test concrete for its compressive strength. The design expressive of simplicity, both of construction and operation, makes the machine easy to use and maintain. The unit is compact, making it useful for site and Laboratory applications. The digital machines are provided with a pace rate controller, to enable maintain a constant of loading.

Features

  • High stability four column load frame
  • Each frame tested for stability and alignment to avoid tension failure during a test and to ensure centre loading
  • Standard Platens for 3 X 6”/ 4 X 8” and 6 X 12” cylinders included.
  • A precise large diameter spherical upper platen for optimum results
  • Variety of optional accessories for cubes, blocks, bricks and flexure test available
  • Motorized hydraulic power pack or pumping unit with rapid approach and automatic overload protection
  • Comes standard with safety Guards on all four sides.

The Complete unit comprises a Loading Unit which is of fully welded or two pillar model construction having a cross-head with a spherical seated platen. The lower platen is attached to the top of the piston. The Loading capacity is of 2000 KN, Cubes up to 200 mm & Cylinders up to 150 mm Dia X 300 mm Height can be tested using the appropriate spacers.

Pumping Unit with choice of compact power pack attached closely to the loading unit or separate hydraulic pumping unit, attached to the loading unit by high pressure hydraulic flexible hose pipe. The pump facilitates rapid approach of the platens for daylight closure and also provides comprehensive control over the application of load. A control valve provides fine control over the loading rate for accurate pacing.

Maximum load is held and retained for approx. 15 min, unless cancelled, using the panel mounted reset switch. Pace rate set for running the test can be maintained manually.

Model With digital Readout and pace rate Controller

Type of Pumping Electrical
Loading Range 2000KN
Least Count 1 KN
Max. Clearance Between Platen 370mm
Max. Clearance Between Side Platen 340mm
Platen Size 220 mm sq.
Piston Stroke 215.00 mm

Optional Fittings

  • Digital Load indicator with RS 232 interface for connection to windows XP based computer system
  • Digital Load indicator with printer interface
  • Batteryback up for Digital Load indicator – in case of power failure
  • Additional Pressure Gauge as `stand by` load indicator for emergency use in case of power failure
  • Spare Oil seal
  • Flexural test attachment (to be ordered at the time of purchase of machine.) Can be accommodated later on, only if request received at the time of placement of order
  • Brick test attachment
  • Block testing attachment
  • Spacers to accommodate small size cubes and cylinders
  • Hydraulic Oil
  • Ram extracting tool

Others Products

#Carbonation chamber #Thermal conductivity test apparatus of AAC Blocks #Freeze-Thaw Chamber (ASTM C666) #Accelerated Curing Tank #Air Enterainment Meter #Compaction Factor Apparatus #Digital Compression Testing Machine #Fully Automatic Concrete Cube Compression Testing Machine #Compression testing machine – Channel Type #Compression Testing Machine – Hand Operated Pillar type #Concrete Mixer – Laboratory Type #Concrete Penetrometer #Concrete Permeability Apparatus #Concrete Test Hammer #Concrete Thermometer #Cube Mould #Cylindrical Molds #Extensometer #Fill Box for SCC Test #Flexural Testing Machine #Flow Table #Hydraulic Jack #J Ring Apparatus #Lateral Extensometer #Longitudinal Compressometer #Needle Vibrator #O Funnel Apparatus #Point Load Index Tester #Slump Test Apparatus #Tile Abrasion Tester #Tile Flexural Testing Machine #U Box #V Funnel Apparatus #Vee Bee Consistometer #Vibrating Table #Volume Change Apparatus #Accelerated Curing Tank #Air Enterainment Meter #Compaction Factor Apparatus #Compression Testing Machine – Digital #Compression Testing Machine – Electrically Operate #Compression Testing Machine – Hand Operated Channel #Compression Testing Machine – Hand Operated Pillar type #Concrete Mixer – Laboratory Type #Concrete Penetrometer #Concrete Permeability Apparatus #Concrete Test Hammer #Concrete Thermometer #Cube Mould #Cylindrical Molds #Extensometer #Fill Box for SCC Test #Flexural Testing Machine #Flow Table #Hydraulic Jack #J Ring Apparatus #Lateral Extensometer #Longitudinal Compressometer #Needle Vibrator #O Funnel Apparatus #Point Load Index Tester #Slump Test Apparatus #Tile Abrasion Tester #Tile Flexural Testing Machine #U Box #V Funnel Apparatus #Vee Bee Consistometer #Vibrating Table #Volume Change Apparatus

 

Categories:  

Air entrainment meter

$0.00

Introduction

Air content of fresh concrete is normally measured, by the use of a special air meter, to assess whether the concrete contains the required amount of air. This would be measured when air’s entrapment or entrainment is required by the concrete design. The method uses the principle of replacing the air in a known volume of concrete with water, the volume of which can then be measured.

General Description & Specifications

The apparatus consists of a pressure tight flanged cylindrical measuring bowl of specified volume in accordance with size of aggregate to be tested. The bowl is fitted with a removable flanged conical cover assembly with the help of a airtight sealing gasket. The conical cover has an air valve and a pet cock for bleeding off the water. A transparent cylindrical stand pipe, which is graduated in air content, is fixed to the conical cover assembly.

Pressure is applied to the specimen with the help of pressure bulb and the pressure is recorded on the pressure gauge which is mounted on the stand pipe. The whole assembly is mounted on a flat base.

Standard Accessories :

Calibration cylinder with spring clamp,Trowel,Tamping rod,Straight edge,Rubber mallet andmeasure. – 1 No. each

#Air entrainment meter

Others products

Accelerated Curing Tank, Ball Mill, Blain Air Permeability Apparatus, Cement Autoclave, Compression Testing Machine – 500 KN Capacity, Curing Compound Mould, Flow Table, Flow Table Motorised, Gauging Trowel, Heat of Hydration of Cement, Gillmore Needle Apparatus, Humidifier ,Humidity Oven, L-Box For Self Compacting Concrete, Le Chatelier Mould, Length Comparator, Low Temperature Cabinet, Mortar Mixer, Photometric Test Apparatus, Pulverizer Laboratory Type, Reflectance Meter, Water retention test apparatus, Sieve Shaker – Gyratory, Sieve Shaker – Rotap, Sieve Shaker – Table Model, Sieve Shaker-Hand Operated, Standard Spatula, Tensile (Briquette) Testing Machine, Vibrating Machine, Vicat Needle Apparatus, Waterbath For Le Chatlier Flask, Wet Sieving Test Apparatus, Fineness of Fly Ash Test apparatus

Categories: