Horizontal Niskin water sampling bottles.
Non-metallic water sampler with capacity for 5L sample. Designed to operate horizontally on a wire only.
1010X External Spring Water Sampling Bottles Now you can have the simplicity and reliability of a Niskin water sampler and have a completely unobstructed sample chamber. The new Niskin X utilizes stainless steel external spring closures. The Niskin X Water Sampler can be activated by the GO Devil Messenger (1000-MG) when individually or serially attached to hydrocable. Sequential closure by remote command with model 1016 Rosette® multibottle array.Inert gas can be injected into the bottle to force retrieved sample out of sampling valve, directly through filter system. The GO-FLO sampling bottle avoids sample contamination at the surface, internal spring contamination, loss of sample on deck (internal seals), and exchange of water from different depths.
Specifications:
PVC tube, Mounting blocks (aluminum on 30L and greater) end plugs, handles and ball valve(1080). Delrin stopcocks, air vent screws and push rod. Stainless steel cable clamps. Buna-N, Vitan, or silicone seals.
Water Sampler sizes: 1.2, 1.7, 2.5, 5, 8, 10, 12, 20, and 30 litres.
101001.7C Water Sampler with 1000MG Go Devil Messenger Horizontal PositionThe Model 1010C series Water Samplers are non-metallic free-flushing Sampling bottles activated by GO Devil messengers (1000-MG) when attached to cable/rope. The adjustable overhead bail allows the sampling bottle to be used in the vertical or horizontal position. The lowering line passes through the push rod (release) cap to insure positive activation by the messenger. Quick release pins facilitate easy change from vertical to horizontal sampling positions without change of the lanyard lengths.
Mounting: Cable clamps on bottles are for cable/rope diameters up to and including 1/4″ (6.4mm).GO Devil Messenger The model 1000MG GO Devil Messenger, snaps on wire with one hand. Used to activate instruments requiring MESSENGER activation. Weight 1.9 lbs.
The Model 1010-ROV Niskin Water Sampler is a non-metallic, free-flushing sampling bottle activated by a unique end stopper triggering mechanism. The release mechanism allows the end stopper to close by simply pulling on a lanyard loop.
These of bottles are intended for trace organic sampling and are available in 0.4L and 1.2L sizes. The main tube is stainless steel with silicone seals. Metal parts are 316 or 304 stainless steel except fasteners and plastic-coated cables of 18-8 steel.
For smaller expected concentrations of organic solutes, choose 1200-G32 or 1295-B32. For smaller concentrations of both metals and organic solutes, choose the all teflon sampler (1295-B32).
Designed for trace organic sampling. When running metal or any other chemical analyses, it is best to run a blank on the sampler prior to use.
This sampler requires a messenger and line (not included, except in kits) for operation.