Download Tag: Hobersal

Muffle Furnaces 1000ºC – 1100ºC

Muffle furnace

Muffle furnace

Hobersal, Spain

MF series (Chamber furnace) 3L t0 30L; Temp. Up to1000 ºC to 1400ºC

STANDARD FEATURES

• CE manufactured • Maximum operating temperature: 1000ºC,1200ºC,1300ºC, 1300ºC • Rapid heating • Compact and lightweight • 24/7 continuous work capability • vertical lift door, works in continuous at high temperature, modern lines • 4 heating plates with KANTHAL AF • Low thermal mass insulation • Built with low density ceramic bricks and ceramic fiber • Double insulation includes air chamber • Outer case in painted metal sheet (inox optional) • Rear ventilation via ceramic chimney • Ceramic tray included • Thermocouple type K or S • Spare parts easily replaceable by end user • Supplier in Bangladesh- Elite Scientific & Meditech Co • Web address- www.elitetradebd.com

FURNACE CONTROLS

• Lower front control panel • Solid state relay • General safety switch • General safety contactor

PAD Digital control

• PID parameters • Non-volatile memory • Microprocessor-based temperature controls • Alarm

CONTROL OPTIONS

• 1 program / 8 segments programmer • 4 program / 15 segments programmer • Programmers up to 64 segments • Data logger and programmer communication by Ethernet/ RS232

SAFETY SHUT-OFF

• Thermocouple break shut-off • Turns off upon door opening

ACCESSORIES

• Interchangeable temperature-uniform trays with rim • Refractory ceramic tray • Incoloy stainless steel tray • Smoke chimney • Forced smoke chimney • Safety alarm Class II. Over-temperature protection • Inlet gas entry • Flow meter box • and more, ask for our full assortment!

CHARACTERISTICS

• Modern design metal case with chrome-phosphatizing base protection and external finish with heat-resistant metal paint. • Refractory parts engineered to resist extreme temperature changes, and specific ceramic paste types applied according to temperature and work fatigue of each part. • Heat resistance in refractory insulation of very low thermal conductivity coefficient. • Door system adjusted on the furnace frame by pressure, allowing for complete sealing. Electrically and thermally insulated door handle.

ACCESSORIES

• Extraction Chimney: Self-extraction design to eliminate smoke in processes that produce smoke in a considerable amount or when smoke extraction is advisable due to the nature of the process. Chimney outlet connection to a smoke bell or to the exterior by end user
• Forced air extraction chimney: Specially designed for a forced self-extraction to evacuate smoke fastat resistance in refractory insulation of very low thermal conductivity coefficient.
• Bottom trays: Interchangeable, temperature uniform, with rim to protect against spilling, fusion or adherence of materials.

Standards:

EN 196-2, 196-21, 459-2 Standards and is used to determine the loss on ignition of cement and lime; chloride, carbon dioxide, alkali content of cement.

Calcination, ashing, tempering, heating, general laboratory purpose

Specifications

Model: MF3-104

• Dimension (Inner) HxWxD: 100x150x200
• Dimension (Outer) HxWxD: 600x430x425
• Volume Liter: 3L
• Power (Kw): 2.2
• Voltage (V): 220
• Max. Temp.: 1000°C
• Max. Temp. On work limited: 950°C
• Max. Temp. Continuous: 900°C
• Net weight (Kg): 60
• Thermocouple: K
• Control type: Digital
• Heating elements: Wire Kanthal
• Heating zones: 4

Model: MF3-109

• Dimension (Inner) HxWxD: 150x200x300
• Dimension (Outer) HxWxD: 660x480x525
• Volume Liter: 9L
• Power (Kw): 2.5
• Voltage (V): 220
• Max. Temp.: 1000°C
• Max. Temp. On work limited: 900°C
• Max. Temp. Continuous: —-°C
• Net weight (Kg): 65
• Thermocouple: K
• Control type: Digital
• Heating elements: Wire Kanthal
• Heating zones: 2

Model: MF22-102

• Dimension (Inner) HxWxD: 200x280x390
• Dimension (Outer) HxWxD: 750x580x625
• Volume Liter: 22L
• Power (Kw): 3.5
• Voltage (V): 220
• Max. Temp.: 1000°C
• Max. Temp. On work limited: 950°C
• Max. Temp. Continuous: —°C
• Net weight (Kg): 95
• Thermocouple: K
• Control type: Digital
• Heating elements: Wire Kanthal
• Heating zones: 2

Model: MF12-104

• Dimension (Inner) HxWxD: 150x200x400
• Dimension (Outer) HxWxD: 660x480x625
• Volume Liter: 12L
• Power (Kw): 3.3
• Voltage (V): 220
• Max. Temp.: 1000°C
• Max. Temp. On work limited: 950°C
• Max. Temp. Continuous: 900°C
• Net weight (Kg): 70
• Thermocouple: K
• Control type: Digital
• Heating elements: Wire Kanthal
• Heating zones: 4

Muffle furnace 3L 1300ºC

#Muffle furnace, 3L 1300ºC, Hobersal, Spain

Door type: Vertical lift door
Model: MF3-134
Brand: Hobersal, Spain
Specification
Maximum temperature: 1300 ºC
Maximum work temperature limited time 1250 ºC
Continuous work temperature 1200 ºC
Insulation specifications
Low density ceramic bricks and ceramic fiber
FURNACE INNER DIMENSIONS (mm) 3 liters
Thermocouple Type: S
Heating zones: 4
Heating elements type: Kanthal AF
Stability: 2 +-ºC
Homogeneity: 5 +ºC
Dimension (inner): H100xW150xD200 [mm]
Dimension (ourer): H600xW430xD425 [mm]
Control System: Digital Single Set Point
Power adjustment: SSR
Power: 2,5Kw; Hertz: 50-60 Hz; Voltage: 220 V II

OPTIONS:

Security [Extra cost] if required]

Security Class II: Digital single set point

Security Class II: Digital single set point + additional Thermocouple

ACCESSORIES [Extra cost] if required

SPARE PARTS (Wear and Tear Material)

Heating elements

Thermocouple type K (HD)

Smoke extraction chimney

Forced smoke extraction chimney

Ramp programmer 1 prog. 8 steps

Inconel bottom tray (metal I-300, with edge)

Stainless steel exterior 304

IQ/OQ

Eurotherm programmer, software itools (Ethernet)

Gas inlet on rear

Crucible tongs 450mm SS

Porcelain Crucible 60ml 1000ºC

Alumina Crucible 99,7% 1700ºC

Muffle furnace, 1300ºC

1300ºC Muffle furnace 6L, Hobersal, Spain

• Door type: Vertical lift door
  Model: MF6-134
  Brand: Hobersal, Spain
• Supplier in Bangladesh- Elite Scientific & Meditech Co
• Web address- www.elitetradebd.com
  Specification
  Maximum temperature: 1300 ºC
  Maximum work temperature limited time 1250 ºC
  Continuous work temperature 1200 ºC
  Insulation specifications
  Low density ceramic bricks and ceramic fiber
  FURNACE INNER DIMENSIONS (mm) 6 liters
  Thermocouple Type: S
  Heating zones: 4
  Heating elements type: Kanthal AF
  Stability: 1 +-ºC
  Homogeneity: 5 +ºC
  Dimension (inner): H150xW150xD250 [mm]
  Dimension (ourer): H660xW430xD510 [mm]
  Control System: Digital Single Set Point
  Power adjustment: SSR
  Power: 4-5Kw; Hertz: 50-60 Hz; Voltage: 220 V II

OPTIONS: Security [Extra cost] if required]

• Security Class II: Digital single set point
• Security Class II: Digital single set point + additional Thermocouple

ACCESSORIES [Extra cost] if required

SPARE PARTS (Wear and Tear Material)

Heating elements

• Thermocouple type K (HD)
• Smoke extraction chimney
• Forced smoke extraction chimney
• Ramp programmer 1 prog. 8 steps
• Inconel bottom tray (metal I-300, with edge)
• Gas inlet on rear
• Crucible tongs 450mm SS
• Porcelain Crucible 60ml 1000ºC
• Alumina Crucible 99,7% 1700ºC

Crucible furnace

Crucible furnace, C9

#Calcine, melt, incinerate, evaporate, foundry..

• Temperature 1.000 ºC
• Useful zone: Ø 100 H:115mm
• Let work 24/7 in continuous mode
• Heating elements around the hole
• Low thermal mass insulation
• Built with low density ceramic bricks and ceramic fiber
• Double isolation chamber
• Outside casing in metal sheet painted ( inox as optional)
• Thermocouple type K
• Compact and lightweight furnace
• Easy to replace all the spare parts by the end user
• Furnace control:
  • Under the furnace
  • Solid state relay
  • PAD Digital control. Microprocessor. Alarm.
  • Furnace disconnection by thermocouple break
• Manufactured under the CE
• Accessories
  • Security class II. Over-temperature protection
  • Inlet gas entry
  • Flow meter box
• Optional regulation
  • 1 program 8 steps (Programmer)
  • 4 program 15 steps (Programmer)
  • Data logger and programmer communication by Ethernet/ RS232
  • Supplier in Bangladesh- Elite Scientific & Meditech Co
  • Web address- www.elitetradebd.com

Crucible furnace, CM12

Crucible furnace, CM12

#Crucible furnace model CM12

#Calcine, melt, incinerate, evaporate, foundry

• Temperature 1.200 ºC
• Useful zone: Ø 100 H:115mm
• Let work 24/7 in continuous mode
• Heating elements around the hole
• Low thermal mass insulation
• Built with low density ceramic bricks and ceramic fiber
• Double isolation chamber
• Outside casing in metal sheet painted ( inox as optional)
• Thermocouple type K
• Compact and lightweight furnace
• Easy to replace all the spare parts by the end user
• Furnace control:
  • Under the furnace
  • Solid state relay
  • PAD Digital control. Microprocessor. Alarm.
  • Furnace disconnection by thermocouple break
• Manufactured under the CE
• Accessories
  • Security class II. Over-temperature protection
  • Inlet gas entry
  • Flow meter box
• Optional regulation
  • 1 program 8 steps (Programmer)
  • 4 program 15 steps (Programmer)

Data logger and programmer communication by Ethernet/ RS232

• Supplier in Bangladesh- Elite Scientific & Meditech Co
• Web address- www.elitetradebd.com

Crucible furnace

Crucible Furnace, TR25-MFF

#Crucible furnace #TR25-MFF

#oxidant or controlled atmosphere, vacumm…

#Calcine, melt, incinerate, evaporate, foundry…)

• Temperature 1.200 ºC  – 1900ºC
• Useful zone: from 3 to 30 liters
• Let work 24/7 in continuous mode
• Heating elements around the hole
• Low thermal mass insulation
• Built with low density ceramic bricks and ceramic fiber
• Double isolation chamber
• Outside casing in metal sheet painted ( inox as optional)
• Thermocouple type K
• Compact and lightweight furnace
• Easy to replace all the spare parts by the end user
• Furnace control:
  • Under the furnace
  • Solid state relay
  • PAD Digital control. Microprocessor. Alarm.
  • Furnace disconnection by thermocouple break
• Manufactured under the CE
• Accessories
  • Security class II. Over-temperature protection
  • Vacuum pump
  • Thermocouples entry
  • Inlet gas entry
  • Flow meter box
• Optional regulation
  • 1 program 8 steps (Programmer)
  • 4 program 15 steps (Programmer)
  • Data logger and programmer communication by Ethernet/ RS232
  • Supplier in Bangladesh- Elite Scientific & Meditech Co
  • Web address- www.elitetradebd.com

Industrial crucible oven

Industrial crucible oven, HCV Series

Crucible furnace up to 1000ºC, C9 Series

#Crucible furnace up to 1200ºC, CM12 Series

#Crucible furnace for vacuum

#Crucible furnace

#Industrial Crucible Furnace

#Crucible furnace industrial

#Crucible Furnaces

#Industrial Crucible Oven

#HCV Cirisol Series (Door on top)

HCV125/13

• Max temp. 1000ºc – 1,200ºc – 1,300ºc – 1,400ºc
• Top door available
• Great availability of crucibles
• 4 hot plates located on both sides, rear wall, door and oven bottom
• Double chamber with air circulation
• Low outside temperature
• Heat loss and minimum external temperature
• Robust oven, continuous working periods at high temperatures
• Low density refractory brick insulation chamber
• Triple layer of insulation
• Metal housing with paint protection (optional stainless steel)
• Rear gas outlet chimney
• S and K type thermocouple
• Mobile stand oven (depending on model)
• Heating elements mounted on a support tube, which allows a slight thermal radiation in the space without being impeded in ……. of insulating walls
• Easy replacement
• Oven control: Located on the side of the oven
  • Solid state relay avoiding mechanical noise
  • Built-in line input cord
  • PAD regulation. Digital automatic pyrometer. Microprocessor. Alarm.
  • Disconnecting the oven when opening the door
  • Oven shutdown due to thermocouple break
  • General safety switch
  • General safety contactor
• CE regulation
• Optional accessories and equipment
• Class II security. Overtemperature alarm regulation
• Mobile support foot
• Crucibles
• Optional regulation
  • Programmer 1 program of 8 segments
  • Programmer 4 programs of 15 segments
  • PC communications software
  • Supplier in Bangladesh- Elite Scientific & Meditech Co
  •  Web address- www.elitetradebd.com

High temperature oven

Oven, High temperature, 300ºC to 500ºC, EHT Series

#High Temperature Ovens Up To 500ºC, EHT Series

#EHT Series High temperature ovens

#HS Series Laboratory ovens up to 300ºC

#Laboratory or industrial oven

• Temperatures 300ºC- 400ºC –  500 ºC
• Side door
• From 20litres to 12.000 litres
• Let work 24/7 in continuous mode
• Forced air circulation ( 1 or 2 engines)
• Low thermal mass insulation
• Built with low density ceramic bricks and ceramic fiber
• Double isolation chamber
• Outside casing in metal sheet painted ( inox as optional)
• Ventilated via rear by ceramic chimney
• Ceramic tray included
• Thermocouple type K
• Compact and lightweight furnace
• Easy to replace all the spare parts by the end user
• Furnace control:
  • Under the furnace
  • Solid state relay
  • PAD Digital control. Microprocessor. Alarm.
  • Furnace disconnection by thermocouple break
  • Furnace disconnection when door is opened
• Manufactured under the CE
• Accessories
  • Steel trays
  • Security class II. Over-temperature protection
  • Inlet gas entry
  • Flow meter box
• Optional regulation
  • 1 program 8 steps (Programmer)
  • 4 program 15 steps (Programmer)
  • Data logger and programmer communication by Ethernet/ RS232

High temperature ovens forced air circulation max. Temperature 500ºC

GENERAL CHARACTERICTICS (COMMON)
High temperature stoves with forced air circulation, allowing for a
maximum temperature of 500ºC.
Stability +-1ºC Homogeneity +-5ºC
Protected and encased heating elements.
Depending on the model, 1 or 2 engines to produce the forced air
circulation, circulating independently of the heating, placed in the
back part of the structure.
Interior structure built of A-310 stainless steel (high resistance to
temperature and corrosion), double chamber with forced air
circulation according to model.
Guides for tray incorporated.
Metal box with chrome-phosphatizing protection and exterior finish
Manufactured according to CE standards.

CONTROL EQUIPMENT
Placed on the stove base.
General safety switch.
General safety contactor.
Safety alarm on temperature.
Heating lamp.

• Supplier in Bangladesh- Elite Scientific & Meditech Co
• Web address- www.elitetradebd.com

Bottom loading furnace

Bottom loading furnace, HOB Series

#Bottom loading furnace up to 1900ºC HOB SERIES

#Oxidant atmosphere

#Controlled atmosphere with hermetic closing

• Temperatures 1.600 ºC – 1.700 ºC -1.800 ºC -1.900 ºC (MoSi2)
• Electric Bottom loading
• Inner sizes under request ( Custom furnace available)
• Let work 24/7 in continuous mode
• MoSi2 High quality molybdenum disilicide heating elements
• Fast heat
• Refrigerated by water
• Inox chamber.
• Low thermal mass insulation
• Built with low density and ceramic fiber
• Double isolation chamber + air chamber
• Outside casing in metal sheet painted ( inox as optional)
• Thermocouple type S or B
• Compact and lightweight furnace
• Easy to replace all the spare parts by the end user
• Furnace control:
  • Under the furnace
  • PAD Digital control. Microprocessor. Alarm.
  • Furnace disconnection by thermocouple break
  • Power adjustment:Eurotherm tyristor equipment
  • General safety switch
  • General safety contactor
• Manufactured under the CE
• Accessories
  • Ceramic tray
  • Smoke chimney
  • Forced smoke chimney
  • Security class II. Over-temperature protection
  • Inlet gas entry
  • Flow meter box
• Optional regulation
  • 1 program 8 steps (Programmer)
  • 4 program 15 steps (Programmer)
  • Data logger and programmer communication by Ethernet/ RS232
  • Supplier in Bangladesh- Elite Scientific & Meditech Co
  • Web address- www.elitetradebd.com

Bottom Loading Furnace

1. A) Air atmosphere
2. B) Controlled atmosphere furnace with hermetic closing

MAX. TEMPERATURE: 1650ºC – 1700ºC – 1800ºC – 1900ºC

GENERAL CHARACTERICTICS (COMMON)
This furnace model is technically designed with the most advanced types of
isolating fibers and heating elements of the current market, which allows you
to obtain a very high temperature range in a much shorter time than the rest
of furnaces of the market built with conventional refractory.
It also has a perfect thermal isolation and without remarkable inertias; in the
chamber construction it is inserted (side, ceiling and bottom) the refractory of
ceramic type except for the bottom manufactured with high temperature
refractory of very high degree of aluminium content and melting point,
allowing for the introduction of parts, crucibles, samples or objects of a certain
consistency and weight without danger of sinking or breaking.
The fiber plates that form the chamber sides and ceiling are supported and
anchored on a double chamber of ceramic refractory plates of the same type
as the bottom plate. – Furnace disconnection by thermocouple break. – Furnace disconnection when opening the door.
Homogeneity ±5%. Stability ±2°
Maximum work temperature: 1.600ºC peak in limited time.
Continuous work regime temperature:1.550ºC
Isolation: 25 and 50mm thick fiber on hot face of chamber M-160.
CONTROL BOX
Ramp programmer 4 programs of 15 segments. Microprocessor in non-volatile
memory.
Manufactured according to the CEE standards BS EN 61010-1-2001
Safety alarm on temperature.

The electrically operated elevator hearth ensures operator safety and prevents radiation of heat from the
chamber walls.
The loading platform has a full travel which allows the complete chamber height to be used.
Outstanding temperature uniformity due to all-around the furnace chamber heating
The furnace can be adapted to accommodate an inert atmosphere, by placing a large inverted alumina crucible
and hermetic (A-304)
Refrigerated by water
Gas inlet and outlet connections