Sedgewick Rafter Counting Cell, Greaticules Optics, UK
Counting Cell Chamber -Greaticules Optics UK
Supplier in BD: Elite Scientific & Meditech Co
PVC Electrical Tape for Textile Uses
SWA PVC Electrical Tape for Textile Uses, PVCT1920-WHI, UK
Based on a 0.11mm soft PVC film, coated with an aggressive rubber-resin adhesive with flame retardancy and good aging characteristics. Excellent conformability and high elongation at break. This tape is designed to comply with BS EN 60454 (BS 3924) standards.
Test Method: EN 60454-1 / ASTM D-1000
Shelf Life: 12 months when stored in the original carton at 23°C and 65% R.H.
Availability: Standard 19 & 20m rolls, Color: White.
The above figures are for reference and cannot be treated as warranties.
Customers are advised to test the material to determine its suitability against intended applications.
Supplier in BD : Elite Scientific & Meditech Co
Artemis 6000 Amino Acid Analyzer (AAA), SCION Instruments, UK
The SCION Artemis 6000 Amino Acid Analyzer is as a turn-key solution complete with a sophisticated HPLC system, ready-to-use buffers, reagents and columns. The Artemis 6000 combines the advantages of the classical ion exchange separation methods with the modern techniques of HPLC. Specifically configured and designed for routine or research amino acid determination, the SCION Artemis 6000 is the complete Amino Acid Analyzer to today’s modern laboratory.
Turn-key solution with reliable performance
∙ Based on SCION’s 50+ years experience in chromatography, results in unmatched performance
∙ Configured package for various applications, e.g. protein hydrolysate, physiological fluid, etc.
∙ Pre-tuned and recommended conditions for “Inject and Run”
∙ Excellent sensitivity with a detection limit as low as 8 pMol (Asp 3p Mol), with great separation power: average peak resolution>1.5, all peak resolution >1.2 (hydrolysate AA) or >1.0 (free AA)
Ease of use
∙ Fully controlled by 21 CFR part 11 compliance data system with multi-language support
∙ Visualised LCD with direct control and support method creation, editing and saving
∙ Modular design, ease of maintenance
Productivity & Robust
∙ Fully automated analysis with protection, e.g. auto washing, leakage protection, etc.
∙ Rapid analysis: 30 – 50 min for hydrolysate sample, 70 – 180 min for physiological sample
∙ Outstanding repeatability in both retention time and peak area
∙ Long-term stability with replaced buffer and consumables
∙ High efficient separation column and ammonia filter column with long lifetime
∙ Inert and non-metal materials for pipes contact with buffer solutions & samples to avoid interference
∙ All buffers protected by inert gas, store in reagent organizer with refrigeration
How the SCION AAA can work for the Oil & Gas market
SCION Artemis 6000 Amino Acid Analyzer is designed to operate 24/7, a definite requirement for around the clock amino acid processing. Amino Acid concentration in oil rock is one of the most important identifiers to determine the quality of the rocks (rich or lean). Thus, the Amino Acid Analyzer is frequently employed for oil and gas exploration.
How the SCION AAA can work for the chemical market
The SCION Amino Acid Analyzer is an ideal solution for any chemical laboratory. Routinely used in the leather industry, the Amino Acid Analyzer is used to determine the concentration of hydroxyproline which affects the quality of the leather.
How the SCION AAA can work for the Pharmaceutical market
SCION Artemis 6000 Amino Acid Analyzer is a versatile technique commonly used in the pharmaceutical industry. For example, some Amino Acids are used for therapy, including Arginine, Aspartate, Cysteine, Glutamic Acid, Histidine and Methionine. Amino Acids are also the building blocks for synthesis of drugs, especially peptide based drugs.
How the SCION AAA can work for the Environmental market
SCION Artemis 6000 Amino Acid Analyzer are designed to support detailed analysis of Amino Acids from recycled products. For example, production of Amino Acids, peptides or protein from industrial waste (like inedible fish, fish scale, oil cake, etc) can help us to reduce and recycle waste products to protect the environment.
Food and agriculture are two of the most important application areas of Amino Acid Analysis. In the food industry, especially the food production process and new product development, the nutrition value and taste are the most crucial factors. For example, in process improvement, a comparison of Amino Acids before and after the process changed in required to evaluate the new process. The analysis of Amino Acids for new product development is also crucial before launching in the market.
In agriculture, the main application of Amino Acid Analyzer is mainly for feedstuff analysis and thremmatology studies.
SCION Artemis 6000 Amino Acid Analyzer provides both Protein Hydrolysate (PH) and Physiological Fluids (PF) systems for the food industry. The PH system is mainly for feedstuff, including the oxidised protein hydrolysate specially optimised for sulfur containing Amino Acids such as Lysine, Threonine, Cystine and Methionine. The PF system is for determination of free Amino Acids in food/nutrition products. Both system are completed package with relevant buffer, reagent and columns together with verified method.
Refrigerated Reagent Organiser For storing all reagents, buffers and wash solutions. • Front side operated • Special valves for applying inert gas for oxygen-free storage • Integrated cooling • Transparent cover is equipped on top to avoid dust and for easy observation of buffer consumption Solvent Delivery System • Only inert materials come in contact with buffer solutions & samples (PEEK or PTFE) • Quaternary gradient pump with two-plunger for smooth eluent delivery • Dual plunger pump with special design for low pulsation (less than 1 %) • Flow rate of 0.000 to 9.999 ml/min • Flow rate stability with RSD<0.1% • Maximum pressure up to 400 bar (6000 PSI) • Integrated 4-channel vacuum degasser • Battery buffered programs stored for the amino acid determination (hydrolysates and physiological fluids) • More than 100 programmable gradient steps with a resolution of 0.1% • Graphic display of gradient profile A, B, C, and D • Programmable mixing cycle for the buffer solution • Programmable flushing procedure • Extended diagnostic features (e.g. high pressure control, low pressure control) Autosamplers • For automatic injection of samples. All parts which come in contact with liquids are chemically inert and biocompatible (PEEK or PTFE) • Large graphical display and keyboard for easy control • Programmable washing procedure with selectable volumes • Programmable port for purging Injection mode Loop overfill mode or Variable sample dosage Injection volume 0-500 µL, 1 μl increments Reproducibility RSD<1% upon injection of 10 µL variable volume Carry over <0.01% Temperature control Temperature controlled sample compartment (5 – 70° C) Sampling Operating in x, y and z-axis Sample rack Two sample racks, 120 vials capacity Interface Large graphical display and keyboard Analytical Specifications Analysis time Hydrolysate sample: 30 – 50 min Physiological sample: 70 – 180 min Sensitivity <8 pMol (All) <2.5 pMolASP, 3 pMol) Reproducibility Qualitative: – RSD<0.5% (All Amino Acids) – RSD<0.1% (Arg) Resolution Hydrolyzate sample – >1.2 (All) or >3.3 (Average), 150 mm column – >1.4 (All) or >3.5 (Average), 175 mm column Free amino acids – >1.0 (All) or >2.5 (Average) Bioamine – >1.2 (All) or >3.0 (Average) Amino Acid Reaction Module • Integrated 2-plunger reagent dosing pump with adjustable flow rate (0.01 to 2.0 ml/min) • Built-in dual filter photometer (440 and 570 nm) with constant signal output and signal summary option • Programmable signal offset • Three different risetimes selectable • Temperature controlled column oven (20 to 99° C ±1° C) with active cooling capability • Temperature controlled post-column derivatisation reactor (up to 180° C ±1° C) • Automatic valve for coil flushing • Display of the actual system pressure • Safety features (e.g. leakage of reactor and column, high pressure) Software • Complete control of Gradient Program, Column & Reactor Temperature • Programmable Sample Sequence with individual run times, gradient and temperature profiles • Automatic usage control of Buffer & Reagent solutions • Emergency-Program (SOS) feature in case of pressure errors • Manual control of each single unit Consumables • Ready-made buffer solutions (each lot tested individually) • Separation columns for a variety of applications with long term stability • Ready-made Ninhydrin solution • A variety of standard solutions Installation Parameters Dimension 720mmx580mmx880mm (W X D X H) Weight 110kg Power Supply 215V – 240V Power Consumption Max 750W Environment Humidity: <90% (Relative) Temperature: 5°C to 35°C N2 gas supply Purity >99.99%, Output pressure 1-3 bar (0.1Mpa – 0.3 Mpa)
Bottle Top Dispenser combined with routine calibration of equipment yield higher quality results. It makes dispensing liquids easier and the volume is adjusted quickly and set reliably. Low error, capable of reducing time and costs in research and experiment and is fully autoclavable.
Used in Qualitative and Quantitative Analysis, Chemical Handling, Pollution Testing, Soil Testing, Environmental Laboratories, Pharmaceutical Laboratories, Research and Development
Also known as Laboratory Bottle-Top Dispenser
|Test Volume||5 ml|
|Gross Weight (kg)||6.1|
|Dimensions in cubic meters||0.72×0.21×0.2|
Verivide CAC-60 4-lights 600 mm color assessment cabinet. The consistency of the light sources in all VeriVide color control cabinets gives excellent viewing conditions for reliable color critical decisions under consistent lighting. CAC-60 is the smallest light box in Verivide’s range and correspondingly is ideal for smaller product.
It should also be considered for offices and production areas where space is at a premium. The smaller size is also reflected in the price. The CAC 60 can accommodate up to 4 light sources.
The light sources can be specified by you, to meet your own specific needs and requirements. The range of lamp options includes D65, TL84, F/A and UV.
You can stipulate the voltage you require and can also ask for the cabinet to be fitted with a Diffuser and/or Dimmers (depend on lamp options you select).
The cabinets are normally supplied painted with a neutral Matt grey but can also be supplied with alternatives of paint colors, Munsell N5 or Munsell N7.
Dimension (WxHxD) : 710x545x420; viewing area (WxHxD): 680x335x380.
VeriVide CAC 120 4-Feet (1200mm) 4 lights color light box. The excellent viewing conditions and the consistency of the light sources obtained from all VeriVide Color Control Cabinets helps to ensure reliable color critical decisions under consistent lighting.
The CAC 120 is the medium sized Light Box in Verivide’s range and is pictured right. It can accommodate up to 4 light sources. The light sources can be specified by you, to meet your own specific needs and requirements.
A typical cabinet includes UV and F with a choice of two other light sources – usually D65 and one ‘point of sale’ light source such as 840 P15, 830 or Cool White. If required A or H can be supplied instead of F.
Dimensions (WxHxD): overall – 1290x755x620 mm, viewing area – 1260x545x590 mm.
You can stipulate the voltage you require to meet the requirement of the end location and you can also ask for the cabinet to be fitted with a Diffuser and/or Dimmers (dependant upon lamp options you select).
These cabinets are normally supplied painted internally with a neutral matt grey but can also be supplied with alternatives of paint colours, Munsell N5 or Munsell N7.
Veri Vide CAC 60-5 600 mm (2-feet) 5 lights color light box. The consistency of the lights sources in all Veri Vide Color Assessment Cabinets gives excellent viewing conditions for reliable color critical decisions under consistent lighting.
The CAC 60-5 is our smallest 5 lamp Light Box in VeriVide’s range and correspondingly is ideal for smaller product which require additional light source options. It should also be considered for offices and production areas where space is at a premium. The smaller size is also reflected in the price.
Dimensions (WxHxD): overall – Width – 710, Height-545, Dimension – 540 mm, viewing area – 680 x 335 x 500 mm.
The CAC 60-5 is fitted with 5 light sources, the first usually being D65. This is ideal for those who require two ‘point of sale’ light sources such as 840 P15 with either 830 or Cool White in the same light box to satisfy the requirements of multiple customers.
If required A or H can be supplied instead of F or A can replace F and H can be the fifth light source if both A and H are required. As with all our CAC range you can stipulate the voltage you require and can also ask for cabinets to be fitted with a Diffuser and/or Dimmers (dependent upon lamp options you select).
The cabinets are painted with a neutral matt grey, either G5574, Munsell N5 or Munsell N7.
VeriVide Color matching cabinet has 45° fixed angle, Suitable for CAC 60
or, CAC 120 and CAC 150, 610 x 235 x 225 mm dimensions.
45° Fixed Angle Table (FAT) suitable for use with color matching cabinet.
The table standardizes viewing geometry to a 45-degree angle which specified by a large number of industries.
The 45 degrees fixed angle table is often required for colorfastness assessment and the visual comparison of paint color.
VeriVide D 65 Artificial Daylight 4 Feet use for Color Assessment cabinet
or, Light box for Fabric inspection.
VeriVide is the buyer recommended worldwide used light’s brand.