Call:+8801711196910
Email:elitetradebd@gmail.com

Download Tag: JSR

Bio-Suction Pump 20 liter per min JSBS-3000

$180,000.00 
Bio-Suction Pump 20 liter/min, JSBS-3000
  • Bio-Suction Pump, JSBS-3000
  • Ultimate Vacuum: 650 mmHg
  • Bottle Capacity: 4000 cc
  • Model: JSBS-3000
  • Brand: JSR, South Korea

Description

Model JSBS-5000 Bio-Suction is an economical, compact and portable solution for aspirating tissue culture samples, aqueous solutions, buffers, culture media residual suction. Two stage oil-free piston pump provides a high flow rate and powerful vacuum aspiration. 4000 cc autoclaveable glass suction bottle with over flow protection stopper protects liquid ingested into the pump system which may lead to the valve failing or a diaphragm rupturing. Pump automatically shut down when full and a hydrophobic PTFE inline filter further protects the pump from aerosol ingestion. Hands free foot pedal switch provides convenient On/ Off operation. Built-in silencer provides comfortable noise-free operation

Technical Specifications:
Pumping Capacity: 20 liter / min
Ultimate Vacuum: 650 mmHg  (-0.08 Mpa ABS)
Collection Bottle –
Capacity: 4000 cc
Material: Glass Bottle / W Cap
Utility: Cap with overflow protection Detachable Inlet / Outlet Fitting / w Cap
Pump Control: On / Off / Foot Pedal
Safety: ф50 mm Hydrophobic inline PTFE filter protects aerosol ingestion
Automatic pump shut off when bottle is full
Convenience: Built-in Silencer Portable carrying handle
Accessories included: Main body built-in vacuum pump system
Collection receiver bottle
ф50 mm inline PTFE filter
Foot Pedal
Silencer
Silicone Tubing
Dimensions:240 x 370 x 330 mm
Electrical Requirement: 220 VAC 50 / 60 Hz
Categories:  

Refrigerated Bath Circulator, JSRC-22C

$330,000.00 
Refrigerated Bath Circulator/Chiller, JSRC-22C
  • Temp. Range: -20°C to + 120°C
  • Capacity: 20 Liter
  • Model: JSRC-22C
  • Brand: JSR, South Korea

Description

-20°C Refrigerated Circulation Bath
Heated/Refrigerated circulating open bath system capable of reaching temperature as low as -20°C and heating up to 120°C for a wide variety of laboratory heating and cooling applications. Internal circulation of thermal fluid within the bath allows precise uniformity within ±0.1°C. Circulation pump enables to circulates heated or refrigerated thermal fluid to external equipments such applications as reactor, condenser, rotary evaporator or controlling the temperature of laboratory equipment such as chromatography columns, viscometers, and densitometers. External circulation pump capacity 10 liters/min. in flow rate and 0.5 bar in pressure.
Technical Specifications:
Capacity: 20 Liter
Temperature: Range: -200C to + 1200C
Heating Type: Direct heating by immersed stainless steel incoloy heater with circulation
Accuracy: ± 0.10C at -10.00C
Uniformity: ± 0.30C at -10.00C
Heater Capacity: 1.2 kW
Control: Main Controller: Digital PID Controller
Wait off Timer: mm:ss / hh:mm / Contnuous Selectable
Sensor: Pt 100Ω
Safety Device: Temperature: Hydraulic Ove Temperature Protection Safety Device
Electrical: CG Fuse
Dimensions W x D x H mm: Inner: 300 x 330 x 200
Usable: 300 x 250 x 200
Outer: 430 x 480 x 720
Material: Bath: Stainless Steel HL (AISI 304)
External: Steel 1T with Epoxy Powder Coating
Lid: Stainless steel lid included
Electrical Requirement: 120VAC 60Hz or 220VAC 50/60Hz
Categories:  

Refrigerated Bath Circulator, JSRC-13C

$275,000.00 
Refrigerated Bath Circulator/Chiller, JSRC-13C
  • Temp. Range: -20°C to + 120°C
  • Capacity: 11 Liter
  • Model: JSRC-13C
  • Brand: JSR, South Korea

Description

-20°C Refrigerated Circulation Bath
Heated/Refrigerated circulating open bath system capable of reaching temperature as low as -20°C and heating up to 120°C for a wide variety of laboratory heating and cooling applications. Internal circulation of thermal fluid within the bath allows precise uniformity within ±0.1°C. Circulation pump enables to circulates heated or refrigerated thermal fluid to external equipments such applications as reactor, condenser, rotary evaporator or controlling the temperature of laboratory equipment such as chromatography columns, viscometers, and densitometers. External circulation pump capacity 10 liters/min. in flow rate and 0.5 bar in pressure.
Technical Specifications:
Capacity: 11 Liter
Temperature: Range: -200C to + 1200C
Heating Type: Direct heating by immersed stainless steel incoloy heater with circulation
Accuracy: ± 0.10C at -10.00C
Uniformity: ± 0.30C at -10.00C
Heater Capacity: 800 Watt
Control: Main Controller: Digital PID Controller
Wait off Timer: mm:ss / hh:mm / Contnuous Selectable
Sensor: Pt 100Ω
Safety Device: Temperature: Hydraulic Ove Temperature Protection Safety Device
Electrical: CG Fuse
Dimensions W x D x H mm: Inner: 240 x 300 x 150
Usable: 240 x 120 x 150
Outer: 370 x 450 x 670
Material: Bath: Stainless Steel HL (AISI 304)
External: Steel 1T with Epoxy Powder Coating
Lid: Stainless steel lid included
Electrical Requirement: 120VAC 60Hz or 220VAC 50/60Hz
Categories:  

Refrigerated Bath Circulator, JSRC-06C

$260,000.00 
Refrigerated Bath Circulator/Chiller, JSRC-06C
  • Temp. Range: -20°C to + 120°C
  • Capacity: 7 Liter
  • Model: JSRC-06C
  • Brand: JSR, South Korea

Description

-20°C Refrigerated Circulation Bath
Heated/Refrigerated circulating open bath system capable of reaching temperature as low as -20°C and heating up to 120°C for a wide variety of laboratory heating and cooling applications. Internal circulation of thermal fluid within the bath allows precise uniformity within ±0.1°C. Circulation pump enables to circulates heated or refrigerated thermal fluid to external equipments such applications as reactor, condenser, rotary evaporator or controlling the temperature of laboratory equipment such as chromatography columns, viscometers, and densitometers. External circulation pump capacity 10 liters/min. in flow rate and 0.5 bar in pressure.
Technical Specifications:
Capacity: 7 Liter
Temperature: Range: -20°C to + 120°C
Heating Type: Direct heating by immersed stainless steel incoloy heater with circulation
Accuracy: ± 0.1°C at -10.0°C
Uniformity: ± 0.3°C at -10.0°C
Heater Capacity: 700 Watt
Control: Main Controller: Digital PID Controller
Wait off Timer: mm:ss / hh:mm / Contnuous Selectable
Sensor: Pt 100Ω
Safety Device: Temperature: Hydraulic Ove Temperature Protection Safety Device
Electrical: CG Fuse
Dimensions W x D x H mm: Inner: 155 x 300 x 150
 Usable: 155 x 90 x 150
 Outer: 290 x 470 x 670
Material: Bath: Stainless Steel HL (AISI 304)
External: Steel 1T with Epoxy Powder Coating
Lid: Stainless steel lid included
Power Rating: 6.7 Amp
Electrical Requirement: 120VAC 60Hz or 220VAC 50/60Hz
Categories:  

Water Bath Digital 30 Liters JSWB-30T

$220,000.00 
Digital water bath 30 Liters JSWB-30T
  • Digital Water Bath 30 Liters, JSWB-30T
  • Bath Volume: 30 Liters
  • Temp. : Amb. +5 oC~120.0 oC
  • Model.: JSWB-30T
  • Brand: JSR, Korea

Description:

JSWB-T Series Digital Water Bath to provides constant temperature environment with heated water. Suitable for biotechnology, chemistry, medical, environmental and general laboratory applications of temperature range from ambient +5 oC to 99 oC Fully automatic measurement

Common Specification:

Heating Direct Immersion Sheath Heater
Temp. Range ambient + 5 oC ~ 120 oC
Accuracy ± 0.2 oC at 37.0 oC (JSWB-11T)
Uniformity ± 0.8 oC at 37.0 oC (JSWB-11T)
Control Digital Microprocessor PID Temperature Controller
3-Zone Temperature Control Algorithm
3-Point Temperature Calibration
1-Point Temperature Offset Calibration
Sensor Class A Pt-100 Ω Sensor
Safety Over-Temperature Cut-Off
Over Current Cut-Off
Material Body – Epoxy Powder Coated Steel
Bath – Electro-polished Seamless Stainless Steel 304
Heater Cover – Perforated Stainless Steel 304
Electric 220±10% VAC 50/60Hz 1-Phase
Plug config. CEE 7/7 Schuko or BS 1363

Specification:

Model JSWB-30T
Electrical Data
Rated voltage 230 ± 10% VAC
Power frequency 50 / 60Hz
Heater Output 600 W 1.0 kW 1.5 kW 2.0 kW
Power Consumption 600 W 2.7 amp 1.0 kW 4.6 amp 1.5 kW 6.8 amp 2.0 kW 9.2 amp
Phase 1 Phase
Plug configuration CEE 7/7 Schuko or BS 1363
Usable Condition
Temp. & Humidity 5oC – 40 oC, < 80% RH
Performance Data
Heating System Immersed Heating Element
Temp. Setting Range Amb. +5 oC ~ 120.0 oC
Accuracy at 37.0 oC ±0.2 oC ← ← ±0.2 oC
Uniformity at 37.0 oC ±0.8 oC ← ← ±1.0 oC
Controller
Processor Digital Microprocessor PID Temperature Controller
Display Back Light Graphic LCD Display
Panel UV Coated Polycarbonate Solid Touch Panel
Button Capacitive touch LED Lighting Touch Button
Interface Push and Rotary encoder type Jog Dial
Control Logic 3 Zone PID Control
Calibration 1 Point Temperature OFFSET
3 Point Temperature Calibration
Resolution 0.1 oC
Turn-Off Timer Max. 99 hr 59 min
Turn-On Delay Time Max. 99 hr 59 min
Sensor CLASS A PT-100 Ω Sensor
Power Restoration Power and Timer Restoration Function in case of power outage
Safety Data
Safety Device Max. Temp. Limit and Cut-Off audio visual alarm
Dual Over Temp. Cut-Off by Controller and Thermostat
High Temp. Cut-Off audio visual alarm
Low Temp. Cut-Off audio visual alarm
PT-Sensor Short or Open audio visual alarm
Over Current Cut-Off
Material Data
Body Epoxy Powder Coated Steel
Bath Seamless Stainless Steel 304 (AISI304)
Heating Element Stainless Steel 304 (AISI304)
Dimension Data
Bath Volume 6 Liters 11 Liters 22 Liters 30 Liters
Inner Dims. (W x D x H mm) 300 x 155 x 150 300 x 240 x 150 500 x 300 x 150 500 x 300 x 200
Usable Dims. (W x D x H mm) 300 x 155 x 110 300 x 240 x 110 500 x 300 x 110 500 x 300 x 160
Outer Dims. (W x D x H mm) 340 x 200 x 270 340 x 285 x 270 545 x 345 x 270 545 x 345 x 320
Packaging Data
Shipping Dims. (WxDxH mm ) 450 x 350 x 320 450 x 350 x 320 600 x 400 x 320 600 x 400 x 380
Type of packaging Carton ← ← ←
Net Weight 5.0 kg 7.0 kg 10.0 kg 12.0 kg
Shipping Weight 6.0 kg 8.0 kg 11.0 kg 13.0 kg

 

 Performance
Maintain water temperature from ambient + 5 oC to 99 oC
Excellent control accuracy within ± 0.2 oC and thermal uniformity within ± 0.8 oC
Corrosion resistant Stainless Steel 304 sheath immersion heater directly heating water in the bath to reach set temperature quickly
Perforated heater cover helps convection of heated water circulation throughout bath to maintain thermal uniformity of the bath
Controller
DIGITAL MICROPROCESSOR PID TEMPERATURE CONTROLLER
Integrated Digital Microprocessor Control System
GRAPHIC LCD DISPLAY
Back Light Graphic LCD Display provides user-friendly operating information
UV COATED POLYCARBONATE TOUCH PANEL
Equipped with Capacitive LED Lighting Touch Button provides sensitive touching operation and durability
ENCODER TYPE JOG DIAL
Push to Start and Stop, Rotary turn to change values provides easy and simple user interface
0.1 oC CONTROL RESOLUTION
TURN-ON TIMER up to 99 hour 59 min and alarm
TURN-OFF DELAY TIMER up to 99 hour 59 min and alarm
Temperature and Timer Memory Function in frequent use
3-ZONE PID ALGORITHM
3-POINT CALIBRATION / 1-POINT OFFSET CALIBRATION
POWER and TIMER RESTORE FUNCTION in case electric power outage
CLASS A PT-100 Ω Sensor
Construction
Durable epoxy powder coated metallic casing
Corrosion resistant Seamless Electro-Polished Stainless Steel 304 bath
Corrosion resistant Stainless Steel 304 sheath immersion heater
Corrosion resistant Stainless Steel 304 flat lid included
Perforated heater cover (bottom plate) included
Convenience
Easy to clean Electro-Polished seamless Stainless Steel 304 Bath
Perforated stainless steel bottom plate
Drain for easy emptying the bath fluid (JSWB-22T, JSWB-30T only)
Supplied with stainless steel Flat Lid to help reduce heat losses and evaporation
Safety
MAXIMUM TEMPERATURE LIMIT SETTING, CUT-OFF HEATER AND AUDIO VISUAL ALARM
DUAL OVER TEMPERATURE CUT-OFF BY CONTROLLER AND INDEPENDENT THERMOSTAT
Controller Program cut-off heater and AUDIO VISUAL ALARM in case +10 oC above set temperature
Independent analog thermostat cut-off heater 10% above set temperature
HIGH TEMPERATURE CUT-OFF AND AUDIO VISUAL ALARM
LOW TEMPERATURE CUT-OFF AND AUDIO VISUAL ALARM
PT SENSOR SHORT OR DISCONNECTION AUDIO VISUAL ALARM
OVER CURRENT CUT-OFF : Fuse
Categories:  

Digital Water Bath 22 Liters/ 6 Hole JSWB-22T

$110,000.00 
Digital Water Bath (6 Hole) 22 Liters,JSWB-22T
  • Digital Water Bath 22 Liters/ 6 Hole JSWB-22T
  • Bath Volume: 22 Liters
  • Temp. : Amb. +5 oC~120.0 oC
  • Model.: JSWB-22T
  • Brand: JSR, Korea

Description:

JSWB-T Series Digital Water Bath to provides constant temperature environment with heated water. Suitable for biotechnology, chemistry, medical, environmental and general laboratory applications of temperature range from ambient +5 oC to 99 oC Fully automatic measurement

Common Specification:

Heating Direct Immersion Sheath Heater
Temp. Range ambient + 5 oC ~ 120 oC
Accuracy ± 0.2 oC at 37.0 oC (JSWB-11T)
Uniformity ± 0.8 oC at 37.0 oC (JSWB-11T)
Control Digital Microprocessor PID Temperature Controller
3-Zone Temperature Control Algorithm
3-Point Temperature Calibration
1-Point Temperature Offset Calibration
Sensor Class A Pt-100 Ω Sensor
Safety Over-Temperature Cut-Off
Over Current Cut-Off
Material Body – Epoxy Powder Coated Steel
Bath – Electro-polished Seamless Stainless Steel 304
Heater Cover – Perforated Stainless Steel 304
Electric 220±10% VAC 50/60Hz 1-Phase
Plug config. CEE 7/7 Schuko or BS 1363

Specification:

Model JSWB-22T
Electrical Data
Rated voltage 230 ± 10% VAC
Power frequency 50 / 60Hz
Heater Output 600 W 1.0 kW 1.5 kW 2.0 kW
Power Consumption 600 W 2.7 amp 1.0 kW 4.6 amp 1.5 kW 6.8 amp 2.0 kW 9.2 amp
Phase 1 Phase
Plug configuration CEE 7/7 Schuko or BS 1363
Usable Condition
Temp. & Humidity 5oC – 40 oC, < 80% RH
Performance Data
Heating System Immersed Heating Element
Temp. Setting Range Amb. +5 oC ~ 120.0 oC
Accuracy at 37.0 oC ±0.2 oC ← ← ±0.2 oC
Uniformity at 37.0 oC ±0.8 oC ← ← ±1.0 oC
Controller
Processor Digital Microprocessor PID Temperature Controller
Display Back Light Graphic LCD Display
Panel UV Coated Polycarbonate Solid Touch Panel
Button Capacitive touch LED Lighting Touch Button
Interface Push and Rotary encoder type Jog Dial
Control Logic 3 Zone PID Control
Calibration 1 Point Temperature OFFSET
3 Point Temperature Calibration
Resolution 0.1 oC
Turn-Off Timer Max. 99 hr 59 min
Turn-On Delay Time Max. 99 hr 59 min
Sensor CLASS A PT-100 Ω Sensor
Power Restoration Power and Timer Restoration Function in case of power outage
Safety Data
Safety Device Max. Temp. Limit and Cut-Off audio visual alarm
Dual Over Temp. Cut-Off by Controller and Thermostat
High Temp. Cut-Off audio visual alarm
Low Temp. Cut-Off audio visual alarm
PT-Sensor Short or Open audio visual alarm
Over Current Cut-Off
Material Data
Body Epoxy Powder Coated Steel
Bath Seamless Stainless Steel 304 (AISI304)
Heating Element Stainless Steel 304 (AISI304)
Dimension Data
Bath Volume 6 Liters 11 Liters 22 Liters 30 Liters
Inner Dims. (W x D x H mm) 300 x 155 x 150 300 x 240 x 150 500 x 300 x 150 500 x 300 x 200
Usable Dims. (W x D x H mm) 300 x 155 x 110 300 x 240 x 110 500 x 300 x 110 500 x 300 x 160
Outer Dims. (W x D x H mm) 340 x 200 x 270 340 x 285 x 270 545 x 345 x 270 545 x 345 x 320
Packaging Data
Shipping Dims. (WxDxH mm ) 450 x 350 x 320 450 x 350 x 320 600 x 400 x 320 600 x 400 x 380
Type of packaging Carton ← ← ←
Net Weight 5.0 kg 7.0 kg 10.0 kg 12.0 kg
Shipping Weight 6.0 kg 8.0 kg 11.0 kg 13.0 kg

 

 Performance
Maintain water temperature from ambient + 5 oC to 99 oC
Excellent control accuracy within ± 0.2 oC and thermal uniformity within ± 0.8 oC
Corrosion resistant Stainless Steel 304 sheath immersion heater directly heating water in the bath to reach set temperature quickly
Perforated heater cover helps convection of heated water circulation throughout bath to maintain thermal uniformity of the bath
Controller
DIGITAL MICROPROCESSOR PID TEMPERATURE CONTROLLER
Integrated Digital Microprocessor Control System
GRAPHIC LCD DISPLAY
Back Light Graphic LCD Display provides user-friendly operating information
UV COATED POLYCARBONATE TOUCH PANEL
Equipped with Capacitive LED Lighting Touch Button provides sensitive touching operation and durability
ENCODER TYPE JOG DIAL
Push to Start and Stop, Rotary turn to change values provides easy and simple user interface
0.1 oC CONTROL RESOLUTION
TURN-ON TIMER up to 99 hour 59 min and alarm
TURN-OFF DELAY TIMER up to 99 hour 59 min and alarm
Temperature and Timer Memory Function in frequent use
3-ZONE PID ALGORITHM
3-POINT CALIBRATION / 1-POINT OFFSET CALIBRATION
POWER and TIMER RESTORE FUNCTION in case electric power outage
CLASS A PT-100 Ω Sensor
Construction
Durable epoxy powder coated metallic casing
Corrosion resistant Seamless Electro-Polished Stainless Steel 304 bath
Corrosion resistant Stainless Steel 304 sheath immersion heater
Corrosion resistant Stainless Steel 304 flat lid included
Perforated heater cover (bottom plate) included
Convenience
Easy to clean Electro-Polished seamless Stainless Steel 304 Bath
Perforated stainless steel bottom plate
Drain for easy emptying the bath fluid (JSWB-22T, JSWB-30T only)
Supplied with stainless steel Flat Lid to help reduce heat losses and evaporation
Safety
MAXIMUM TEMPERATURE LIMIT SETTING, CUT-OFF HEATER AND AUDIO VISUAL ALARM
DUAL OVER TEMPERATURE CUT-OFF BY CONTROLLER AND INDEPENDENT THERMOSTAT
Controller Program cut-off heater and AUDIO VISUAL ALARM in case +10 oC above set temperature
Independent analog thermostat cut-off heater 10% above set temperature
HIGH TEMPERATURE CUT-OFF AND AUDIO VISUAL ALARM
LOW TEMPERATURE CUT-OFF AND AUDIO VISUAL ALARM
PT SENSOR SHORT OR DISCONNECTION AUDIO VISUAL ALARM
OVER CURRENT CUT-OFF : Fuse
Categories:  

Water Bath Digital 11 Liter, JSWB-11T

$75,000.00 
Digital Water Bath 11 Liters, JSWB-11T
  • Water Bath Digital 11 Liters Model: JSWB-11T
  • Bath Volume: 11 Liters
  • Temp. : Amb. +5°C~120°C
  • Model: JSWB-11T
  • Brand: JSR, Korea

Description:

JSWB-T Series Digital Water Bath to provides constant temperature environment with heated water. Suitable for biotechnology, chemistry, medical, environmental and general laboratory applications of temperature range from ambient +5 oC to 99 oC Fully automatic measurement

Common Specification:

Heating Direct Immersion Sheath Heater
Temp. Range ambient + 5 oC ~ 120 oC
Accuracy ± 0.2 oC at 37.0 oC (JSWB-11T)
Uniformity ± 0.8 oC at 37.0 oC (JSWB-11T)
Control Digital Microprocessor PID Temperature Controller
3-Zone Temperature Control Algorithm
3-Point Temperature Calibration
1-Point Temperature Offset Calibration
Sensor Class A Pt-100 Ω Sensor
Safety Over-Temperature Cut-Off
Over Current Cut-Off
Material Body – Epoxy Powder Coated Steel
Bath – Electro-polished Seamless Stainless Steel 304
Heater Cover – Perforated Stainless Steel 304
Electric 220±10% VAC 50/60Hz 1-Phase
Plug config. CEE 7/7 Schuko or BS 1363

Specification:

Model JSWB-11T
Electrical Data
Rated voltage 230 ± 10% VAC
Power frequency 50 / 60Hz
Heater Output 600 W 1.0 kW 1.5 kW 2.0 kW
Power Consumption 600 W 2.7 amp 1.0 kW 4.6 amp 1.5 kW 6.8 amp 2.0 kW 9.2 amp
Phase 1 Phase
Plug configuration CEE 7/7 Schuko or BS 1363
Usable Condition
Temp. & Humidity 5oC – 40 oC, < 80% RH
Performance Data
Heating System Immersed Heating Element
Temp. Setting Range Amb. +5 oC ~ 120.0 oC
Accuracy at 37.0 oC ±0.2 oC ← ← ±0.2 oC
Uniformity at 37.0 oC ±0.8 oC ← ← ±1.0 oC
Controller
Processor Digital Microprocessor PID Temperature Controller
Display Back Light Graphic LCD Display
Panel UV Coated Polycarbonate Solid Touch Panel
Button Capacitive touch LED Lighting Touch Button
Interface Push and Rotary encoder type Jog Dial
Control Logic 3 Zone PID Control
Calibration 1 Point Temperature OFFSET
3 Point Temperature Calibration
Resolution 0.1 oC
Turn-Off Timer Max. 99 hr 59 min
Turn-On Delay Time Max. 99 hr 59 min
Sensor CLASS A PT-100 Ω Sensor
Power Restoration Power and Timer Restoration Function in case of power outage
Safety Data
Safety Device Max. Temp. Limit and Cut-Off audio visual alarm
Dual Over Temp. Cut-Off by Controller and Thermostat
High Temp. Cut-Off audio visual alarm
Low Temp. Cut-Off audio visual alarm
PT-Sensor Short or Open audio visual alarm
Over Current Cut-Off
Material Data
Body Epoxy Powder Coated Steel
Bath Seamless Stainless Steel 304 (AISI304)
Heating Element Stainless Steel 304 (AISI304)
Dimension Data
Bath Volume 6 Liters 11 Liters 22 Liters 30 Liters
Inner Dims. (W x D x H mm) 300 x 155 x 150 300 x 240 x 150 500 x 300 x 150 500 x 300 x 200
Usable Dims. (W x D x H mm) 300 x 155 x 110 300 x 240 x 110 500 x 300 x 110 500 x 300 x 160
Outer Dims. (W x D x H mm) 340 x 200 x 270 340 x 285 x 270 545 x 345 x 270 545 x 345 x 320
Packaging Data
Shipping Dims. (WxDxH mm ) 450 x 350 x 320 450 x 350 x 320 600 x 400 x 320 600 x 400 x 380
Type of packaging Carton ← ← ←
Net Weight 5.0 kg 7.0 kg 10.0 kg 12.0 kg
Shipping Weight 6.0 kg 8.0 kg 11.0 kg 13.0 kg
 Performance
Maintain water temperature from ambient + 5 oC to 99 oC
Excellent control accuracy within ± 0.2 oC and thermal uniformity within ± 0.8 oC
Corrosion resistant Stainless Steel 304 sheath immersion heater directly heating water in the bath to reach set temperature quickly
Perforated heater cover helps convection of heated water circulation throughout bath to maintain thermal uniformity of the bath
Controller
DIGITAL MICROPROCESSOR PID TEMPERATURE CONTROLLER
Integrated Digital Microprocessor Control System
GRAPHIC LCD DISPLAY
Back Light Graphic LCD Display provides user-friendly operating information
UV COATED POLYCARBONATE TOUCH PANEL
Equipped with Capacitive LED Lighting Touch Button provides sensitive touching operation and durability
ENCODER TYPE JOG DIAL
Push to Start and Stop, Rotary turn to change values provides easy and simple user interface
0.1 oC CONTROL RESOLUTION
TURN-ON TIMER up to 99 hour 59 min and alarm
TURN-OFF DELAY TIMER up to 99 hour 59 min and alarm
Temperature and Timer Memory Function in frequent use
3-ZONE PID ALGORITHM
3-POINT CALIBRATION / 1-POINT OFFSET CALIBRATION
POWER and TIMER RESTORE FUNCTION in case electric power outage
CLASS A PT-100 Ω Sensor
Construction
Durable epoxy powder coated metallic casing
Corrosion resistant Seamless Electro-Polished Stainless Steel 304 bath
Corrosion resistant Stainless Steel 304 sheath immersion heater
Corrosion resistant Stainless Steel 304 flat lid included
Perforated heater cover (bottom plate) included
Convenience
Easy to clean Electro-Polished seamless Stainless Steel 304 Bath
Perforated stainless steel bottom plate
Drain for easy emptying the bath fluid (JSWB-22T, JSWB-30T only)
Supplied with stainless steel Flat Lid to help reduce heat losses and evaporation
Safety
MAXIMUM TEMPERATURE LIMIT SETTING, CUT-OFF HEATER AND AUDIO VISUAL ALARM
DUAL OVER TEMPERATURE CUT-OFF BY CONTROLLER AND INDEPENDENT THERMOSTAT
Controller Program cut-off heater and AUDIO VISUAL ALARM in case +10 oC above set temperature
Independent analog thermostat cut-off heater 10% above set temperature
HIGH TEMPERATURE CUT-OFF AND AUDIO VISUAL ALARM
LOW TEMPERATURE CUT-OFF AND AUDIO VISUAL ALARM
PT SENSOR SHORT OR DISCONNECTION AUDIO VISUAL ALARM
OVER CURRENT CUT-OFF : Fuse
Categories:  

Water Bath Digital 6 Liter, JSWB-06T

$65,000.00 
Digital Water Bath 6 Liters, JSWB-06T
  • Water Bath Digital 6 Liters Model: JSWB-06T
  • Bath Volume: 6 Liters
  • Temp.: Amb. +5 oC~120.0 oC
  • Model: JSWB-06T
  • Brand: JSR, Korea

Description:

JSWB-T Series Digital Water Bath to provides constant temperature environment with heated water. Suitable for biotechnology, chemistry, medical, environmental and general laboratory applications of temperature range from ambient +5 oC to 99 oC Fully automatic measurement

Common Specification:

Heating Direct Immersion Sheath Heater
Temp. Range ambient + 5 oC ~ 120 oC
Accuracy ± 0.2 oC at 37.0 oC (JSWB-11T)
Uniformity ± 0.8 oC at 37.0 oC (JSWB-11T)
Control Digital Microprocessor PID Temperature Controller
3-Zone Temperature Control Algorithm
3-Point Temperature Calibration
1-Point Temperature Offset Calibration
Sensor Class A Pt-100 Ω Sensor
Safety Over-Temperature Cut-Off
Over Current Cut-Off
Material Body – Epoxy Powder Coated Steel
Bath – Electro-polished Seamless Stainless Steel 304
Heater Cover – Perforated Stainless Steel 304
Electric 220±10% VAC 50/60Hz 1-Phase
Plug config. CEE 7/7 Schuko or BS 1363

Specification:

Model JSWB-06T
Electrical Data
Rated voltage 230 ± 10% VAC
Power frequency 50 / 60Hz
Heater Output 600 W 1.0 kW 1.5 kW 2.0 kW
Power Consumption 600 W 2.7 amp 1.0 kW 4.6 amp 1.5 kW 6.8 amp 2.0 kW 9.2 amp
Phase 1 Phase
Plug configuration CEE 7/7 Schuko or BS 1363
Usable Condition
Temp. & Humidity 5oC – 40 oC, < 80% RH
Performance Data
Heating System Immersed Heating Element
Temp. Setting Range Amb. +5 oC ~ 120.0 oC
Accuracy at 37.0 oC ±0.2 oC ← ← ±0.2 oC
Uniformity at 37.0 oC ±0.8 oC ← ← ±1.0 oC
Controller
Processor Digital Microprocessor PID Temperature Controller
Display Back Light Graphic LCD Display
Panel UV Coated Polycarbonate Solid Touch Panel
Button Capacitive touch LED Lighting Touch Button
Interface Push and Rotary encoder type Jog Dial
Control Logic 3 Zone PID Control
Calibration 1 Point Temperature OFFSET
3 Point Temperature Calibration
Resolution 0.1 oC
Turn-Off Timer Max. 99 hr 59 min
Turn-On Delay Time Max. 99 hr 59 min
Sensor CLASS A PT-100 Ω Sensor
Power Restoration Power and Timer Restoration Function in case of power outage
Safety Data
Safety Device Max. Temp. Limit and Cut-Off audio visual alarm
Dual Over Temp. Cut-Off by Controller and Thermostat
High Temp. Cut-Off audio visual alarm
Low Temp. Cut-Off audio visual alarm
PT-Sensor Short or Open audio visual alarm
Over Current Cut-Off
Material Data
Body Epoxy Powder Coated Steel
Bath Seamless Stainless Steel 304 (AISI304)
Heating Element Stainless Steel 304 (AISI304)
Dimension Data
Bath Volume 6 Liters 11 Liters 22 Liters 30 Liters
Inner Dims. (W x D x H mm) 300 x 155 x 150 300 x 240 x 150 500 x 300 x 150 500 x 300 x 200
Usable Dims. (W x D x H mm) 300 x 155 x 110 300 x 240 x 110 500 x 300 x 110 500 x 300 x 160
Outer Dims. (W x D x H mm) 340 x 200 x 270 340 x 285 x 270 545 x 345 x 270 545 x 345 x 320
Packaging Data
Shipping Dims. (WxDxH mm ) 450 x 350 x 320 450 x 350 x 320 600 x 400 x 320 600 x 400 x 380
Type of packaging Carton ← ← ←
Net Weight 5.0 kg 7.0 kg 10.0 kg 12.0 kg
Shipping Weight 6.0 kg 8.0 kg 11.0 kg 13.0 kg

 Performance
Maintain water temperature from ambient + 5 oC to 99 oC
Excellent control accuracy within ± 0.2 oC and thermal uniformity within ± 0.8 oC
Corrosion resistant Stainless Steel 304 sheath immersion heater directly heating water in the bath to reach set temperature quickly
Perforated heater cover helps convection of heated water circulation throughout bath to maintain thermal uniformity of the bath
Controller
DIGITAL MICROPROCESSOR PID TEMPERATURE CONTROLLER
Integrated Digital Microprocessor Control System
GRAPHIC LCD DISPLAY
Back Light Graphic LCD Display provides user-friendly operating information
UV COATED POLYCARBONATE TOUCH PANEL
Equipped with Capacitive LED Lighting Touch Button provides sensitive touching operation and durability
ENCODER TYPE JOG DIAL
Push to Start and Stop, Rotary turn to change values provides easy and simple user interface
0.1 oC CONTROL RESOLUTION
TURN-ON TIMER up to 99 hour 59 min and alarm
TURN-OFF DELAY TIMER up to 99 hour 59 min and alarm
Temperature and Timer Memory Function in frequent use
3-ZONE PID ALGORITHM
3-POINT CALIBRATION / 1-POINT OFFSET CALIBRATION
POWER and TIMER RESTORE FUNCTION in case electric power outage
CLASS A PT-100 Ω Sensor
Construction
Durable epoxy powder coated metallic casing
Corrosion resistant Seamless Electro-Polished Stainless Steel 304 bath
Corrosion resistant Stainless Steel 304 sheath immersion heater
Corrosion resistant Stainless Steel 304 flat lid included
Perforated heater cover (bottom plate) included
Convenience
Easy to clean Electro-Polished seamless Stainless Steel 304 Bath
Perforated stainless steel bottom plate
Drain for easy emptying the bath fluid (JSWB-22T, JSWB-30T only)
Supplied with stainless steel Flat Lid to help reduce heat losses and evaporation
Safety
MAXIMUM TEMPERATURE LIMIT SETTING, CUT-OFF HEATER AND AUDIO VISUAL ALARM
DUAL OVER TEMPERATURE CUT-OFF BY CONTROLLER AND INDEPENDENT THERMOSTAT
Controller Program cut-off heater and AUDIO VISUAL ALARM in case +10 oC above set temperature
Independent analog thermostat cut-off heater 10% above set temperature
HIGH TEMPERATURE CUT-OFF AND AUDIO VISUAL ALARM
LOW TEMPERATURE CUT-OFF AND AUDIO VISUAL ALARM
PT SENSOR SHORT OR DISCONNECTION AUDIO VISUAL ALARM
OVER CURRENT CUT-OFF : Fuse
Categories:  

Shaking Incubator, JSSI-100C, 110 Liter

$415,000.00 
Compact Shaking Incubator, JSSI-100C, 110 Liter
  • Shaking Incubator (Compact), JSSI-100C
  • Temp.: +5~70°C & Sp. 20~350rpm
  • Refri.-CFC-Free Air Cooled Com
  • Model: JSSI-100C
  • Brand: JSR, Korea

Descriptions

Compact Shaking Incubator
JSSI-100 Series Compact Shaking Incubator is ideal for any shaking application requiring controlled temperature and shaking speed for microbiology, cell biology, cell culture, tissue culture, biochemistry, molecular biology, environmental engineering, soil testing field temperature range from + 10°C to +70°C.

Common Specification:

Heating Forced Air Convection
Cooling CFC Free air cooled hermetically sealed compressor
Temp. Range JSSI-100T     : ambient + 5°C ~ 70°C
JSSI-100C     : + 10°C ~ 70°C
Accuracy ± 0.2°C at 25.0°C (JSSI-100C)
Uniformity ± 1.0°C at 25.0°C (JSSI-100C)
Shaking Motion Orbital or Reciprocal
Speed Range 20 ~ 350 rpm (orbital)
Control Integrated Microprocessor PID Control
Auto STOP Stop Timer
Sensor Class A Pt-100 Ω Sensor
Safety Over-Temperature Cut-Off
Over Current Cut-Off
Material Body – Epoxy Powder Coated Steel
Chamber – Stainless Steel 304
Tempered Safety Glass Window
Electric 220±10% VAC 50/60Hz 1-Phase
Plug config. CEE 7/7 Schuko or BS 1363

Model: 

Art No. JSSI-100T
Chamber Volume 110 L
Dimensions Inner 545 x 585 x 345
W x D x H mm Outer 770 x 715 x 790
Platform W500 x D465 mm
Temperature Range ambient + 5°C to 70°C + 10°C to 70°C
Accuracy ± 0.2°C at 37°C ± 0.2°C at 25°C
Uniformity ± 1.0°C at 37°C ± 1.0°C at 25°C
Shaking Motion Orbital or Reciprocal
Speed 20 ~ 350 rpm
Stroke 20 mm
Working Light 25 Watt Bulb
Heater Capacity 400 Watt 700 Watt
Refrigeration System none CFC-Free Air Cooled Compressor
Power Rating 2.2 Amp 5.8 Amp
Power Plug CEE 7/7 Schuko European Standard   or BS 1363 British Plug
Controller
JSC-7S Integrated Digital PID Controller
Temperature control with ±0.1°C
Shaking speed control within ±1 rpm
Automatic STOP timer Max. 99min 59sec / 99hr 59min / 99day 23hr
Dual digital LED displays TEMP, RPM and remaining TIME
Temperature calibration
Shaking speed calibration
Slow Start and Stop Control
Auto-tuning function
Class A Pt-100 Ω sensor
Safety
DUAL OVER TEMP. CUT-OFF
Digital system cut-off heater and AUDIO VISUAL ALARM in case +2°C above set temperature
Analog system cut-off heater 10% above set temp.
MAX TEMP CUT-OFF heater and AUDIO VISUAL ALARM when +1°C above maximum limit
OVER COOLING. CUT-OFF
Digital system automatically cut-off compressor in case -3°C below set temperature
SENSOR DISCONNECTION ALARM
Motor failure ALARM
Shaking motion automatically stops when door opened
OVER CURRENT CUT-OFF : Electric Leakage Breaker
Categories:  

Shaking Incubator, JSSI-100T, 110 Liter

$340,000.00 
Compact Shaking Incubator, JSSI-100T, 110 Liter
  • Shaking Incubator (Compact), JSSI-100T
  • Temp.: +5~70°C & Sp. 20~350rpm
  • Refrigeration: None
  • Model: JSSI-100T
  • Brand: JSR, Korea

Descriptions

Compact Shaking Incubator

JSSI-100 Series Compact Shaking Incubator is ideal for any shaking application requiring controlled temperature and shaking speed for microbiology, cell biology, cell culture, tissue culture, biochemistry, molecular biology, environmental engineering, soil testing field temperature range from + 10°C to +70°C.

Common Specification:

Heating Forced Air Convection
Cooling CFC Free air cooled hermetically sealed compressor
Temp. Range JSSI-100T     : ambient + 5°C ~ 70°C
JSSI-100C     : + 10°C ~ 70°C
Accuracy ± 0.2°C at 25.0°C (JSSI-100C)
Uniformity ± 1.0°C at 25.0°C (JSSI-100C)
Shaking Motion Orbital or Reciprocal
Speed Range 20 ~ 350 rpm (orbital)
Control Integrated Microprocessor PID Control
Auto STOP Stop Timer
Sensor Class A Pt-100 Ω Sensor
Safety Over-Temperature Cut-Off
Over Current Cut-Off
Material Body – Epoxy Powder Coated Steel
Chamber – Stainless Steel 304
Tempered Safety Glass Window
Electric 220±10% VAC 50/60Hz 1-Phase
Plug config. CEE 7/7 Schuko or BS 1363

Model: 

Art No. JSSI-100T
Chamber Volume 110 L
Dimensions Inner 545 x 585 x 345
W x D x H mm Outer 770 x 715 x 790
Platform W500 x D465 mm
Temperature Range ambient + 5°C to 70°C + 10°C to 70°C
Accuracy ± 0.2°C at 37°C ± 0.2°C at 25°C
Uniformity ± 1.0°C at 37°C ± 1.0°C at 25°C
Shaking Motion Orbital or Reciprocal
Speed 20 ~ 350 rpm
Stroke 20 mm
Working Light 25 Watt Bulb
Heater Capacity 400 Watt 700 Watt
Refrigeration System none CFC-Free Air Cooled Compressor
Power Rating 2.2 Amp 5.8 Amp
Power Plug CEE 7/7 Schuko European Standard   or BS 1363 British Plug

 

Controller
JSC-7S Integrated Digital PID Controller
Temperature control with ±0.1°C
Shaking speed control within ±1 rpm
Automatic STOP timer Max. 99min 59sec / 99hr 59min / 99day 23hr
Dual digital LED displays TEMP, RPM and remaining TIME
Temperature calibration
Shaking speed calibration
Slow Start and Stop Control
Auto-tuning function
Class A Pt-100 Ω sensor
Safety
DUAL OVER TEMP. CUT-OFF
Digital system cut-off heater and AUDIO VISUAL ALARM in case +2°C above set temperature
Analog system cut-off heater 10% above set temp.
MAX TEMP CUT-OFF heater and AUDIO VISUAL ALARM when +1°C above maximum limit
OVER COOLING. CUT-OFF
Digital system automatically cut-off compressor in case -3°C below set temperature
SENSOR DISCONNECTION ALARM
Motor failure ALARM
Shaking motion automatically stops when door opened
OVER CURRENT CUT-OFF : Electric Leakage Breaker
  • Supplier in Bangladesh Elite Trade BD, Elite Scientific & Meditech Co
  • Web address: elitetradebd.com
  • Twitter: https: //twitter.com/elitetradebd
  • Facebook: https://www.facebook.com/elitetradebd
  • Instagram: https://www.instagram.com/elitetradebd/
  • LinkedIn: https://www.linkedin.com/in/elitetradebd/
Categories: