Concentrator, NB-504CIR
Concentrator, NB-504CIR
Features
- -No dew condensation on the inner glass lid can observe inside without disturbance of operation
- -Plate DC motor provides low noise and no vibration
- -Inhalation & exhalation proceed through the middle hole of chamber for reduced contamination
Specifications
| Model | NB-504CIR |
| Chamber | Max.250mlx4ea or 1.5mlx58ea |
| Chamber (mm) | 340Dx200L |
| Speed range | 1700/2000rpm |
| Temp. range | +4 to 70°C |
| Vacuum range | Diaphram/2mBar+Analog gage |
| Cold trap | Built-in |
| Timer | 0 to 48hr |
| Lid | IR Emitting |
| Heat | IP lid heat |
| Material | Stainless steel+Expoxy coated steel plate |
| Control & display | Microprocessor PID control & digital LED display |
| Electric power | 110/220VAC, 50/60Hz |
| Overall(WxDxH) | 550x600x900mm |
| Weight | 60 Kg |
| Supplier | Elite Scientific & Meditech Co. |
| For more info | www.elitetradebd.com |
Accessories: 1. Rotor
- 5mlx58ea
- 10ml (13-50DX150L)x30ea
- 50ml(28Dx120L)x16ea
- 250ml (65Dx100L)x4ea
SWD series Soxhlet Water Bath
Features
This soxhelt water bath are designed to gently warm samples, evaporate liquids, and melt solids such as agar.
Concentric ring can be removed from inner cover to accommodate various vessel shapes and sizes
Four or Six holes model provide bath temperature up to 100C
Specifications
| Model | SWB-6 | SWB-3×2 | SWB-4×2 | ||
| Capacity | 14 liter – 6×1 | 20liter-3×2 | 26 liter-4×2 | ||
| Chamber (Wx8xH) | 890x150x100 | 520x350x110 | 680x350x110 | ||
| Temp. range | Ambient to Max. 100·C | ||||
| Timer | Digital J 99hr,59min | ||||
| Heating | 1.5 Kw | 1.6 Kw | 1.8 Kw | ||
| Material | Interior | Stainless steel | |||
| Exterior | Epoxy coated steel plate | ||||
| Control & Display | Digital & LCD | ||||
| Safety Device | Over temp. limiter | ||||
| Power source | 220VAC,50/60Hz | ||||
| Overall | (WxDxH) | 920x180x190 | 700x420x235 | I | 860x420x235 |
| Weight | (Kg) | 13 | 16 | I | 20 |
Options : Glassware
Laminar Air Cabinet CB-V/CB-H series
Features
These safety cabinet are all steel with welded, unitized construction of main frame and 304 SS of interior
Air inlet and outlet utilize HEFA filter 99.97% efficient on 0.3um particles
The negative pressure plenum design provides complete personal protection with Class 100(ISO Class 5) air
Service fixture enable to connection air,gas,water,electric or vacuum source
Also included FL lighting and UV lamp for work area decontamination
Specification
| Model | CB-90-V | CB-120-V | CB-150-V | CB-180-V | |||
| Model | CB-90-H | CB-120-H | C”B-1S0-H | CB-180-H | |||
| Working Area | (WxBxH) | 900x630x630mm | 1200x630x630mm | 1500x630x630mm | 1800x630x630mm | ||
| Air flow direction | V : Vertical flow I H: Horizontal flow | ||||||
| Clearness Class | Class II I Clearness 100 | ||||||
| Main Filter | HEPA 99.97% efficiency 0.311111 particle | ||||||
| Air Flow | 980 m3/hr | 1300 m3/hr | 1700 m3/hr | 2030 m3/hr | |||
| Air velocity | Inflow: 0.6 – 0.7 m/sec | Down: 0.3 – 0.5 m/sec. Adjustable | |||||
| Sterilizing | 2 xUV30W | 2 x UV40W | 2 x UV40W | 2 xUV40W | |||
| Illumination | 2 x FL30W | 2 x FL40W | 2 x FL40W | 2 x FL40W | |||
| Blower | Centrifugal high efficiency fan with speed control | ||||||
| Noise Level | 55 – 60 dBA | ||||||
| Control & display | Analog manometer & push button | ||||||
| Material | Case | Stainless steel interior & Steel plate with epoxy coated exterior | |||||
| Door | Tempered safety glass with sliding door | ||||||
| Work Table | Stainless steel | ||||||
| Utility Device | Gas, Air/Water Cock, 2 x Electric receptacle | ||||||
| Power source | 220VAC,50/60Hz | ||||||
| Overall | CB-V type | 1 020x840x1830 mm | 1320x840x1830 mm | 1620x840x1830 mm | 1960x840x1830 mm | ||
| (WxDxH) | CB-H type | 1 060x990x1830 mm | 1360x990x1830 mm | 1660x990x1830 mm | 1960x990x1830 mm | ||
| Weight | (Kg) | 230 | 250 | 270 | 290 | ||
Options : 1) Main Filter efficiency 99.997% (ULFA) 2) Microprocessor digital control type
Model:
Laminar Air Cabinet:-
CB-90-H,V
CB-120-H,V
CB-150-H,V
CB-180-H,V
Digital Laminar Air Cabinet:-
CB-90-H,V-D
CB-120-H,V-D
CB-150-H,V-D
CB-180-H,V-D
Autoclave -DAC Series, Programmable
Features
- Vertical loading maximizes usable chamber space
- Casters and flexible plumbing make sterilizers completely mobile
Our compact portable digital autoclave are ideal for laboratories that share equipment.
Designed with rolling casters for excellent mobility and easy storage – just push into a storage room
when not in use to make room in your lab.
Top mounted stainless steel door also saves space in your lab and provide easy loading
The digital autoclave feature fully automated operation.
Simply place your load in the pressure chamber and enter all parameters with the easy-to-use keypad.
The LCD display shows set and actual temperature as well as set time remaining.
Specifications
| Model | DAC-45 | DAC-60 | DAC-80 | DAC-100 | |
| Capacity | 45Iiter | 60 liter | 80 liter | 100 liter | |
| Chamber size (DxL) | 300x 630mm | 350 x 630mm | 400x 650mm | 450 x 650mm | |
| Temp. range | 105 -125’C +O.5’C Sterilizing: 121 ·c | ||||
| Timer | Digital 99hr/59min | ||||
| Material | Interior | Stainless steel | |||
| Exterior | Steel plate with powder coating | ||||
| Basket | Stainless steel, full length x 1 and half -length x 1 | ||||
| Control & Display | Microprocessor PID controller & digital LED display | ||||
| Operation Pressure | 1.15 bar (Gauge : 0 – 3 Kg/cm2) | ||||
| Safety Device | Pressure safety valve, Over current protector, Over temp. limiter, Low water level switch | ||||
| Power source | 220VAC, 5O/60Hz | ||||
| Overall | (WxDxH) | 530x700x950 mm | 530x750x950 mm | 750x600x950 mm | 850x650x980 mm |
| Weight | (Kg) | 75 | 100 | 110 | 120 |
Options
Programmable control
Thermo Cycler (Exicycler and MyGenie)
Features
Multiplexing with four different fluorophores and reproducible results
Multi applications for DNA, RNA and virus copy number quantification or qualitative analysis,
target identification, genotyping etc.
High sensitive and wide dynamic detection range and self diagnostics for system maintenance
High resolution and useful melting curve analysis for target identification
Simultaneous fluorescence detection and high throughput processing of sample in well plates
Broad range of excitation and emission wave lengths
Uniform and exquisite thermal gradient
Specifications
| Model | Exicycler | MyGenie | |
| Sample capacity | 96 well f 20-50ul | 96 well f 0.2ml tube | |
| Heating & Cooling | Peltier | ||
| Temperature range | 4C – 99C | ||
| Operation temperature | 15C – 30C ±0.3C | ||
| Lid temperature | 90C – 120C | ||
| TempfTime increment | 9.9C/60sec | ||
| Operation humidity | 20% – 80% | ||
| Gradient range | 40C-75Cin 1C – 20C | ||
| Ramping range | Max.2.5C in 0.1 C/sec | ||
| No.of program/steps | – | 150/40 | |
| No.of repeated cycle | – | 99 | |
| Display | PC Monitor by user | 20 x 4 Characterl LCD | |
| Operation system | MS Window XP | 20 Keypad | |
| Communication port | USB2.0 | RS2.32 | |
| Power source | 110f220VAC,50/60Hz | ||
| Overall | (WxDxH) | 355x540x470(mm) | 238x235x297(mm) |
| Weight | (Kg) | 30 | 8 |
| Light source | UHP short arc lamp I 120W | – | |
| Detector | 2DCCD | – | |
| Excitation filters | 5 sets f 490-640nm | – | |
| Emission filters | 5 sets f 520-670nm | – | |
Double beam UV/VIS Spectrophotometer & Single beam UV Spectrophotometer
Features
🐦Double beam optic type and embedded PC (window xp)
🐦17″ color LCD monitor or touch screen monitor (option)
🐦Universal sample rotating cell holder holds 8 cells & 1 blank
🐦Superb optics for maximized accuracy and reliability
🐦User- friendly software, USB ports and accessory connection
🐦Versatile data processing and better in holding memories
🐦This economical scanning spectrophotometer produce first-rate result using any UV analytical method
🐦Ideal for DNA,Protein,kinetics and more
🐦High quality components & system enable superior resolution
🐦Specify method parametric setup using simple on-board keypad control of from computer
Specifications
| Model | Optizen 3220UV | UV-3300 | ||
| Description | Scanning UV-VIS | Scanning UV-VIS | ||
| Bandwidth | < 1.0 nm | 1 nm | ||
| Wave length | 190 – 1100 nm | 190 -1100 nm | ||
| accuracy | ± 0.3 nm at 656.1 nm | ±0.2 nm | ||
| repeatability | ± 0.1 nm | ± 0.05 nm | ||
| Scanning speed | Max. 3000 nm/min | Max.1000nm/min | ||
| Photometric system | Double beam photometric system | Single beam photometric system | ||
| accuracy | ± 0.004Abs (STD) at 0.1 Abs | ±0.004 Abs(O.5 to 1.0Abs) | ||
| repeatability | ± 0.002 Abs (STD) at 0.1 Abs | “;’0.002 Abs | ||
| Stray light | <0.05% at 340 nm | <0.05% at 340 nm | ||
| Source lamp | Pre-aligned tungsten & Deuterium lamp | Halogen & Deuterium lamp | ||
| Display | 17″ color monitor with soft ware | Graphic LCD | ||
| Detector | 2 silicon photodiodes | High sensitive silicon photodiode | ||
| Output | PC,USB,USB Memory, serial printer | PC,USB,RS232 & Serial printer | ||
| Power source | 220VAC,50/60Hz | 90-240VAC,50/60Hz | ||
| Overall | (WxDxH) | 600x400x250mm | 440x425x225 mm | |
| Weight | 35 Kg | 15 kg | ||
HS-2300 Water Analyzer
Features
🐦Spectrophotometer type water analyzer using the water test kit
🐦Convenience and easy to use in the laboratory as well as a plant
🐦Digital LED display and automatic battery saver
🐦Versatile application: laboratory,plant,drinking water treatment system
Specifications
| Model | HS-2300 | |
| Measurement | Photometric method by special reagent | |
| Light source | LED lamp 1405,470,525,605,880nm | |
| Detector | High sensitive silicon photodiode | |
| Control &display | Digital LED 16×4 line | |
| Interface | RS232 | |
| Power source | 110-240VAC,50/50Hz, 12V battery 900mA | |
| Overall | (WxDxH) | 250x200x85mm |
| Weight | 4 Kg | |
Analog Hotplate & Magnetic Stirrer HS/MS Series
Features
🐦Take this compact magnetic stirrer anywhere you need vigorous sample stirring
🐦Or, use it in the lab and eliminate the need for cumbersome extension cords
🐦Stirrer features stepless speed control knob,ceramic coated top plate and corrosion resistant epoxy coated metal case
🐦Offered 2 models of different function each
Specifications
| Model | HS-18 | HS-30 | MS-18 | MS-30 | HP100 | |
| Function | Hotplate & Magnetic Stirrer | Magnetic Stirrer | Hot plate | |||
| Top Plate | (WxL) | 180x180mm | 300x300mm | 180x180mm | 300x300mm | 180x180mm |
| Heater Capacity | 680W | 1400W | – | – | 680W | |
| Temp. Range | Max.380·C | Max.350·C | – | – | Max 380’C | |
| Stirring Capacity | Upto 5liter | Upto 15 liter | Upto 5liter | Upto 15 liter | Upto 5 liter | |
| Stirring Speed | 100 – 1500rpm | 100 – 1300rpm | 100 – 1500rpm | 100 – 1300rpm | – | |
| Power Source | 110f220VAC,SOf60Hz | |||||
| Overall | (WxDxH) | 200x240x105mm | 310x430x120mm | 200x240x105mm | 310x430x120mm | 200x240x105mm |
| Weight | (Kg) | 3.S | 7 | 3 | 6 | 3 |
Multi Hot plate & Stirrer HSD Series
Features
Systematized multi-position, independent heat and stirring
Ceramic coated top plate resists acid and chemicals
Accurate temp.control by high performance microprocessor
Feed back control of temperature on the hot plate
Specifications
| Model | HSD334-01 |
HSD326-01 |
|
| No. of Position |
4 |
6 |
|
| Top plate | (WxL) | 300x300mm | 300x210mm |
|
Stirring Capacity |
4 x 1 liter |
6 x 500ml |
|
| Stirring Range | 100 -1500 rpm | ||
| Temp. Range | Max.350·C | ||
| Timer | Digital 99hr,59min | ||
| Function | Clock I Anti-Clock wise, Auto reverse rotation | ||
| Top plate Material | Ceramic coated aluminum plate | ||
| Control & Display | M/processor feed back control & digital display | ||
| Power Source | 110 or 220VAC,50/60Hz | ||
| Overall | (WxDxH) | 310x430x120mm | 310x340x120mm |
| Weight | (Kg) | 8 | 7 |
| Model | HSD120-03P | HSD150-03P | |
| No.of Position | 3 individual | ||
| Top plate | (WxL) | 3x120x120mm | 3x 150x150mm |
| Stirring Capacity | 3 x 1 liter | 3 x 2 liter | |
| Stirring Range | 100 -1500 rpm | ||
| Temp. Range | Max.380·C | ||
| Timer | Digital 99hr,59min | ||
| Top plate Material | Ceramic coated aluminum plate | ||
| Control & Display | M/processor feed back control & digital display | ||
| Power Source | 110 or 220VAC,50/60Hz | ||
| Overall | (WxDxH) | 480x260x125mm | 510x300x125mm |
| Weight | (Kg) | 7.5 | 8.5 |
Deionizing ROMAX Water System
Features
Connect to tap water line to set-up easy
Tap water supply: 2 Kg/cm2
Exchange the ion resin in the MB polisher every 3 – 4 months
Economic price and simple design
Specifications
| Model | ROMAX-04 | ROMAX-08 | |||||
| Production flow rate | 4 Iiter/hr | 8 liter/hr | |||||
| Conductivity | 0.067 – 0.1 (us/em) 118.2 LIQ-cm | ||||||
| Feed water | Tap water: 2 Kg/cm2 | ||||||
| Filter system | Prefilter,A/C filter; RO membrance | ||||||
| Deion Filter, M/F filter | |||||||
| TOe value | < 50 ppb | ||||||
| Control & display | Power on-off, Automatic water level switch | ||||||
| Power source | 220VAC,50/60Hz | ||||||
| Overall | (WxDxH) | 230x450x550mm | |||||
| Weight | (Kg) | 20 | |||||
| Options | UV sterilizer | (TOC < 5 -10 ppb) | |||||