Elite Scientific & Meditech Co.
ISO Rubbing Cloth (5x5cm), James Heal500 Pcs per Box
Description
Crocking Cloth/Cotton Lawn Rubbing Fabric For Testing Colour Transfer
Crocking cloth, also known as cotton lawn fabric or rubbing cloth, is used in a Crockmaster (Crockmeter) to check the amount of dye transfer, following a dry or wet rub fastness test. The dyed sample is rubbed, under controlled conditions, against the white crocking cloth. Subsequently, the degree of colour transfer is evaluated using a Grey Scale for assessing Staining.
Supplier in BD : Elite Scientific & Meditech Co
Others Link of elitetradebd
BHT-Free Polythene Film 400x200mm, 100 pcs, SDC, UK
Description
SDC Phenolic Yellowing Control Fabrics 10cm x 3 cm 25 Pcs Per Packet
Independent Testing
Where applicable, to ensure that all results are accurate, unbiased and impartial, testing is carried out in Independent UKAS Accredited Test Laboratories and sampling is conducted using ISO guidelines as a minimum requirement.
Internal Master Standards
Conformity of SDC Phenolic Yellowing Control Fabric over time, between and within batches, is vital to give consistent test results and enable accurate comparison of test specimens to performance requirements. SDC Phenolic Yellowing Control Fabric is compared during every test with a Master Standard; this guarantees no drift in performance over time.
Packaging
Please ensure that the product is retained in its original SDCE packaging, which contains the correct batch details. All product packaging is tested to ensure there are no contaminants or BHT content that could cause fabric yellowing. Pack sizes are measured and approved using UK weights and measures act.
Supplier in BD : Elite Scientific & Meditech Co
Others Link of elitetradebd
Phenolic Yellowing Control Fabrics 10 cm x 3 cm 25 Pcs, SDC, UK
Description
SDC Phenolic Yellowing Control Fabrics 10cm x 3 cm 25 Pcs Per Packet
Independent Testing
Where applicable, to ensure that all results are accurate, unbiased and impartial, testing is carried out in Independent UKAS Accredited Test Laboratories and sampling is conducted using ISO guidelines as a minimum requirement.
Internal Master Standards
Conformity of SDC Phenolic Yellowing Control Fabric over time, between and within batches, is vital to give consistent test results and enable accurate comparison of test specimens to performance requirements. SDC Phenolic Yellowing Control Fabric is compared during every test with a Master Standard; this guarantees no drift in performance over time.
Packaging
Please ensure that the product is retained in its original SDCE packaging, which contains the correct batch details. All product packaging is tested to ensure there are no contaminants or BHT content that could cause fabric yellowing. Pack sizes are measured and approved using UK weights and measures act.
Supplier in BD : Elite Scientific & Meditech Co
Others Link of elitetradebd
SDC Impregnated Test Papers 100mm x 30mm, SDC, UK
SDC Impregnated Test Papers 100mm x 75mm, 50 Pcs/Pack
Description
SDC Phenolic Yellowing Impregnated Test Papers 100mm x 75mm 50 Pcs per Packet
Independent Testing
Where applicable, to ensure that all results are accurate, unbiased and impartial, testing is carried out in Independent UKAS Accredited Test Laboratories and sampling is conducted using ISO guidelines as a minimum requirement.
In addition to performance testing, multiple samples of each batch of impregnated paper are subjected to chemical analysis to determine the level of the active ingredient in the paper. These results are checked versus internal specifications and the level set out in clause 7.1 of BS EN ISO 105 – X18:2007.
Packaging
Please ensure that the product is retained in its original SDCE packaging, which contains the correct batch details. All product packaging is tested to ensure there are no contaminants or BHT content that could cause fabric yellowing. Pack sizes are measured and approved using UK weights and measures act.
Supplier in BD : Elite Scientific & Meditech Co
Others Link of elitetradebd
Light Fastness Mounting Cards (OBA/FBA) 13 x 4.5 cm, 200 Pcs, SDC, UK
Description
SDC Light Fastness Mounting Cards LFS Mounting Card FBA Free 13 x 4.5 cm
200 Pcs per Packet
Used for mounting the Blue Wool pieces and test specimens. Use of OBA/FBA free cards is recommend as OBA/FBA’s are not stable under exposure to the light and any visual change in the mounting card can influence the grading process. This is specified in several standards.
Supplier in BD : Elite Scientific & Meditech Co
Others Link of elitetradebd
Light Fastness Mounting Card, SDC, UK 14 x 7 cm 100 Pcs
Description
SDC Light Fastness Mounting Cards LFS Mounting Card FBA Free 14 x 7 cm 100 Pcs per Packet
Used for mounting the Blue Wool pieces and test specimens. Use of OBA/FBA free cards is recommend as OBA/FBA’s are not stable under exposure to the light and any visual change in the mounting card can influence the grading process. This is specified in several standards.
Supplier in BD : Elite Scientific & Meditech Co
Others Link of elitetradebd
Control Fabrics 100 x 30 mm, 25 Pcs/Packet, James Heal, UK
Phenolic Yellowing Control Fabrics 100 x 30 mm
Description
James Heal Control Fabrics 100 x 30 mm, Made in England.
James Heal’s predictive phenolic yellowing test kit is designed to assess the potential for either white or pastel-colored yarns, fabrics or garments to suffer from ‘yellowing.’ This is often a common occurrence amongst light-colored fabrics which can be caused due to both chemical and environmental factors, and fabric aging.
The James Heal test kit is the original, developed by Courtaulds research. Designed in order to investigate complaints that particularly arise during either transit or storage. Please beware of copies and counterfeit products in the marketplace. These can, not only diminish the accuracy or consistency of results but may also cause health and safety issues.
Supplier in BD : Elite Scientific & Meditech Co
Others Link of elitetradebd
SDC Cotton Ballast 92 x 92 cm Cotton Fabric
Description
SDC Cotton Ballast 92 cm x 92 cm 5 per pack Dummy Load Ballast, UK
Independent Testing
Where applicable, to ensure that all results are accurate, unbiased and impartial, testing is carried out in Independent UKAS Accredited Test Laboratories and sampling is conducted using ISO guidelines as a minimum requirement.
Internal Master Standards
Conformity of SDC Cotton Ballast over time, between and within batches, is vital to give consistent test results and enable accurate comparison of test specimens to performance requirements. SDC Cotton Ballast is compared during every test with a Master Standard, this guarantees no drift in performance over time.
Packaging
Please ensure that the product is retained in its original SDCE packaging, which contains the correct batch details. All product packaging is tested to ensure there are no contaminants or BHT content that could cause fabric yellowing. Pack sizes are measured and approved using UK weights and measures act.
Polyester Ballast 20 x 20 cm (20 Pcs Packet)
Description
Polyester Makeweight – 20x20cm 1 Kg pack 20 Pcs SDC 100% Polyester Ballast
Conformity of SDC Polyester Ballast over time, between and within batches, is vital to give consistent test results and enable accurate comparison of test specimens to performance requirements. SDC Polyester Ballast is compared during every test with a Master Standard, this guarantees no drift in performance over time.
Packaging
Please ensure that the product is retained in its original SDCE packaging, which contains the correct batch details. All product packaging is tested to ensure there are no contaminants or BHT content that
could cause fabric yellowing.
Pack sizes are measured and approved using UK weights and measures act.
Supplier in BD : Elite Scientific & Meditech Co
Humidity Control Fabric (Red) 25x15cm, 1 Pattern
Description
SDC Humidity Control Fabric ISO 105 B02, 1 Pattern 25x15cm per pack
This is an azoic dyed cotton fabric with specified fading properties, which varies with the amount of relative humidity.
It is used as a calibration tool for light fastness testing. When the humidity of the light fastness testing machine is correctly set it will fade at an identical rate to the light fastness standard Number 5. It is supplied with a printed instruction sheet for its use to determine the correct settings for the relevant ISO 105 B series test method.
Supplier in BD : Elite Scientific & Meditech Co
Glass Plates (Polished Edges)-100x40x3mm; James Heal
Description
Supplier in BD : Elite Scientific & Meditech Co
SDC Woven Felt Pads 140mm, 24 Pcs Discs
Description
SDC Woven Felt Pads 140mm Discs 24 Pcs per Packet
Produced to ensure the consistent weight and thickness specified in the standard, this ensures that the testing will achieve excellent correlation when used in combination with the full range of SDC Martindale consumables. This product is available in ready cut discs of 140mm.
Pilling tubes set (4 pcs)
Description
Description
Polyester Makeweight – 30cmx30cm pack 25 Pcs SDC 100% Polyester Ballast
Conformity of SDC Dummy Polyester Ballast over time, between and within batches, is vital to give consistent test results and enable accurate comparison of test specimens to performance requirements. SDC Polyester Ballast is compared during every test with a Master Standard; this guarantees no drift in performance over time.
Packing
Please ensure that the product is retained in its original SDCE packaging, which contains the correct
batch details. All product packaging is tested to ensure there are no contaminants or BHT content that
could cause fabric yellowing.
Pack sizes are measured and approved using the UK weights and measures act.
Description
SDCE Light Fastness Standards No. 8 patterns 15x25cm
These are a series of 8 wool fabrics dyed with specified blue dyes to give blue wool cloths ranging from very low lightfastness to very high lightfastness. This forms a numerical scale of 1 to 8 where 1 has the poorest light fastness, to 8 which has the best lightfastness. This allows fabrics to be graded, using a Grey Scale for Change in Color, for correlation with performance in use. This is used to predict the suitability for a given end-use; typically apparel would be a minimum of grade 4 whilst furnishings would require a grade 6. They are used in the ISO 105 B series of tests and can be used in conjunction with the Humidity Control fabric for machine calibration.
To complement the range of Blue Wool Standards we also supply specially prepared mounted card that is totally free of any optical brightening agents. This ensures mounted samples are easier to grade as the card does not show a significant color change. It is widely recognized that the Color of the background can influence how an item is finally graded.
SDC Soap Powder FBA free ISO 105 C series-2kg tub SDCE ECE Non Phosphate Detergent (A) 2kg per tub SDCE ECE Non Phosphate Detergent (A) 15 Kg box SDCE ECE Phosphate Detergent (B) 2 Kg per tub SDCE ECE Phosphate Detergent (B) 15 Kg per box SDCE Reference Detergent No 4 2 Kg, Formerly (IEC A) per 2 Kg tub SDCE Reference Detergent No 4 15 Kg – Formerly (IEC A) per 15 Kg box SDCE IEC Phosphate Detergent (B) 2kg per tub SDCE IEC Phosphate Detergent (B) 15kg per box SDCE Reference Detergent Type (6) 15kg per sack SDCE Reference Detergent Type (7) 15kg per sack SDCE IEC Non Phosphate Detergent A* (A Star) SDCE Non-ionic detergent, C13 oxoalcoholethoxylate (7EO) (1.5Kg) SDCE Fabric Conditioner – Type 1 5Kg Ariel Colour per box Persil Hand Wash & Twin Tub per box Persil Biological per box Persil non Biological per box Persil Colour per box Ariel Actilift Powder per box
Textile laboratory testing equipment and accessories
James Heal UK Standard Reference Detergents
James Heal UK Soap Powder FBA free ISO 105 C series-2kg tub, James Heal UK ECE Non Phosphate Detergent (A) 2kg per tub, James Heal UK Non Phosphate Detergent (A) 15 Kg box, James Heal UK Phosphate Detergent (B) 2 Kg per tub, James Heal UK ECE Phosphate Detergent (B) 15 Kg per box, James Heal UK Reference Detergent No 4 2 Kg, Formerly (IEC A) per 2 Kg tub James Heal UK Reference Detergent No 4 15 Kg – Formerly (IEC A) per 15 Kg box, James Heal UK IEC Phosphate Detergent (B) 2kg per tub, James Heal UK IEC Phosphate Detergent (B) 15kg per box, James Heal UK Reference Detergent Type (6) 15kg per sack, James Heal UK Reference Detergent Type (7) 15kg per sack, James Heal UK IEC Non Phosphate Detergent A* (A Star) James Heal UK Non-ionic detergent, C13 oxoalcoholethoxylate (7EO) (1.5Kg), James Heal UK Fabric Conditioner – Type 1 5Kg, Ariel Colour per box, Persil Hand Wash & Twin Tub per box, Persil Biological per box, Persil non Biological per box, Persil Colour per box, Ariel Actilift Powder per box
Standard Soap (Type 1) without OBA, 1.5kg/tub
This product is manufactured for use in the ISO 105 C series of Colour fastness tests. This powder is free from fluorescent brightening agent and the formulation is tightly controlled to ensure it meets the specification of the ISO standard. This high standard of manufacture also ensures excellent batch to batch continuity.
Product Codes:
Testing Categories: Colour Fastness, Dimensional Stability
Supplier in BD : Elite Scientific & Meditech Co
Others Link of elitetradebd
SDCE Light Fastness Mounting Cards Product Codes:
2836: LFS Mounting card FBA Free 13 x 4.5 cm
2837: LFS Mounting card FBA Free 14 x 7 cm
Descriptions
Used for mounting the Blue Wool pieces and test specimens. Use of OBA/FBA free cards is recommend as OBA/FBA’s are not stable under exposure to the light and any visual change in the mounting card can influence the grading process. This is specified in several standards.
Testing Categories: Colour Fastness
SDCE Wool Abradent Product Codes:
2016: 5 meter Pack
2024: 175 mm Discs
Descriptions
Testing and quality control are carried out at the yarn stage, after weaving of the greige fabric and the final finished abradant cloth. This ensures excellent correlation and conformity, not only within the production batch, but also between different production batches. Available in 5 metre packs or in pre-cut 175mm discs.
Testing Categories: Physical