Portable honey refractometer brix 58-90% for honey test ATC China

$2,500.00
ATC portable honey refractometer brix 58-90%

Description

ATC Portable Honey Refractometer Brix 58-90%

Specifications:

  • One SCALE Brix s: 58 to 90%Brix
  • Reference Temperature: 20°C
  • ATC(Automatic Temperature Compensation) Compensation Range: 10°C~30°C (50°F~86°F)
  • Manual calibration with mini-screw driver provided

Package:

  • 1 x Refractometer
  • 1 x Pipette
  • 1 x Screw driver
  • 1 x Cleaning cloth
  • 1 x English Instruction manual

Supplier in BD: Elite Scientific & Meditech Co

Categories:  

Portable refractometer brix 28-62% sugar solution test

$2,500.00
ATC portable refractometer brix 28-62% for sugar test, China

Description

Portable Refractometer Brix 28-62% ATC, China

Brix Refractometer use to the sugar solution

Open daylight plate, and 2-3 drops of distilled water on the main prism, close the daylight plate so he q=water spreads across the entire surface of the prism without air bubbles or dry sport. Allow the sample to temperature adjust on the prisms for approximately 30 seconds before going to step 2. This allows the sample to adjust to the ambient temperature of the hand refractometer.

Hold daylight plates in the direction of the light source and look into the eyepiece. If you will a circular filed with Gradution down the entrance, you may have to focus the eyepiece to clear see the gradution. The uppers portion of the filed should be blue, while the lower portion should be white. The picture shown here and shown in stem 3 or 4 are only as reference.

Specifications:

  • One SCALE Brix s: 28 to 62%Brix
  • Reference Temperature: 20°C
  • ATC(Automatic Temperature Compensation) Compensation Range: 10°C~30°C (50°F~86°F)
  • Manual calibration with mini-screw driver provided

Package:

  • 1 x Refractometer
  • 1 x Pipette
  • 1 x Screw driver
  • 1 x Cleaning cloth
  • 1 x English Instruction manual

Supplier in BD: Elite Scientific & Meditech Co

Categories:  

Salinity refractometer 0-100 ppm portable for salt test ATC China

$2,500.00
ATC Hand heal salinity refractometer 0-100ppm for salt test

Description

ATC Hand Heal Salinity Refractometer 0-100%

Salinity  Refractometer this meter used for All purpose  Nacl water solution

Open daylight plate, and 2-3 drops of distilled water on the main prism, close the daylight plate so he q=water spreads across the entire surface of the prism without air bubbles or dry sport. Allow the sample to temperature adjust on the prisms for approximately 30 seconds before going to step 2. This allows the sample to adjust to the ambient temperature of the hand refractometer.

Hold daylight plates in the direction of the light source and look into the eyepiece. If you will a circular filed with Gradution down the entrance, you may have to focus the eyepiece to clear see the gradution. The uppers portion of the filed should be blue, while the lower portion should be white. The picture shown here and shown in stem 3 or 4 are only as reference.

Specifications:

  • One SCALE Brix s: 0 to 100% Salinity Reference Temperature: 20°C
  • ATC(Automatic Temperature Compensation) Compensation Range: 10°C~30°C (50°F~86°F)
  • Manual calibration with mini-screw driver provided

Package:

  • 1 x Refractometer
  • 1 x Pipette
  • 1 x Screw driver
  • 1 x Cleaning cloth
  • 1 x English Instruction manual

Supplier in BD: Elite Scientific & Meditech Co

Categories:  

Hand refractometer brix 0-90% for sugar test

$2,500.00
Hand refractometer 0-90% brix for sugar test, ATC, China

Description

Hand Refractometer Brix 0-90% ATC

Brix Refractometer use to the Heavy sugar solution

Open daylight plate, and 2-3 drops of distilled water on the main prism, close the daylight plate so he q=water spreads across the entire surface of the prism without air bubbles or dry sport. Allow the sample to temperature adjust on the prisms for approximately 30 seconds before going to step 2. This allows the sample to adjust to the ambient temperature of the hand refractometer.

Hold daylight plates in the direction of the light source and look into the eyepiece. If you will a circular filed with Gradution down the entrance, you may have to focus the eyepiece to clear see the gradution. The uppers portion of the filed should be blue, while the lower portion should be white. The picture shown here and shown in stem 3 or 4 are only as reference.

Specifications:

  • One SCALE Brix s: 0 to 90% Brix
  • Reference Temperature: 20°C
  • ATC(Automatic Temperature Compensation) Compensation Range: 10°C~30°C (50°F~86°F)
  • Manual calibration with mini-screw driver provided

Package:

  • 1 x Refractometer
  • 1 x Pipette
  • 1 x Screw driver
  • 1 x Cleaning cloth
  • 1 x English Instruction manual

Supplier in BD: Elite Scientific & Meditech Co

Categories:  

Hand refractometer 0-32% brix for sugar test

$2,500.00
Automatic temperature compensation hand refractometer 0-32% brix

Description

Hand refractometer Brix 0-32% ATC

Brix Refractometer use to the sugar solution

Open daylight plate, and 2-3 drops of distilled water on the main prism, close the daylight plate so he q=water spreads across the entire surface of the prism without air bubbles or dry sport. Allow the sample to temperature adjust on the prisms for approximately 30 seconds before going to step 2. This allows the sample to adjust to the ambient temperature of the hand refractometer.

Hold daylight plates in the direction of the light source and look into the eyepiece. If you will a circular filed with Gradution down the entrance, you may have to focus the eyepiece to clear see the gradution. The uppers portion of the filed should be blue, while the lower portion should be white. The picture shown here and shown in stem 3 or 4 are only as reference.

Specifications:

  • One SCALE Brix s: 0 to 32%Brix
  • Reference Temperature: 20°C
  • ATC(Automatic Temperature Compensation) Compensation Range: 10°C~30°C (50°F~86°F)
  • Manual calibration with mini-screw driver provided

Package:

  • 1 x Refractometer
  • 1 x Pipette
  • 1 x Screw driver
  • 1 x Cleaning cloth
  • 1 x English Instruction manual

Supplier in BD: Elite Scientific & Meditech Co

Categories:  

Syringe filter nylon 0.22um 25mm diameter white color

$3,500.00
Syringe filter 0.22um 25mm diameter nylon 100 pcs packet

Nylon Syringe filter 0.22um 100/pk

Description

Syringe Filter 0.22um 25mm Diameter Nylon 100/Pk white Color

Nylon Syringe filter

  • High Mechanical and tensile strength
  • Used for most organic solvents and mid-polar liquids.
  • Two type in pore size 0.22um and 0.45um in filter size: 25mm

Features

  • This Nylon+PP pre-filter provides two times greater throughput than standard without pre-filtration.
  • One of the most commonly used membranes; broad compatibility with aqueous and organic solvents, with stable hydrophlicity, not suitable for highly acidic sample.

Applications: 

  • Used for most organic solvents mixtures and mid-polar liquids.
  • Chemical filtration and Beverage filtration.
  • Note: Nylon binds protein, do not use when high protein recovery is desired.

Specification:

  • Material of housing : PP
  • Effective filtration area cm²: 25mm/4.15cm²
  • Pore size (um) : 0.22/0.45
  • Process volume (ml) : 100ml(25mm)
  • Maximum Operating Temperature : 100°C
  • Maximum Operating Pressure (psi) : 87psi

Supplier in BD: Elite Scientific & Meditech Co

Categories:  

Syringe filter 0.45um 25mm diameter nylon 100 pcs packet

$3,500.00
Nylon syringe filter 0.45um 25mm diameter

Syringe Filter 0.45um 25mm Dia Nylon 100/Pk

Description

Syringe Filter 0.45um 25mm Diameter Nylon 100/Pk white Color

Nylon Syringe filter

  • High Mechanical and tensile strength
  • Used for most organic solvents and mid-polar liquids.
  • Two type in pore size 0.22um and 0.45um in filter size: 25mm

Features

  • This Nylon+PP pre-filter provides two times greater throughput than standard without pre-filtration.
  • One of the most commonly used membranes; broad compatibility with aqueous and organic solvents, with stable hydrophlicity, not suitable for highly acidic sample.

Applications: 

  • Used for most organic solvents mixtures and mid-polar liquids.
  • Chemical filtration and Beverage filtration.
  • Note: Nylon binds protein, do not use when high protein recovery is desired.

Specification:

  • Material of housing : PP
  • Effective filtration area cm²: 25mm/4.15cm²
  • Pore size (um) : 0.22/0.45
  • Process volume (ml) : 100ml(25mm)
  • Maximum Operating Temperature : 100°C
  • Maximum Operating Pressure (psi) : 87psi

Supplier in BD: Elite Scientific & Meditech Co

Categories:  

Syringe filter 0.45um 25mm dia PTFE white color

$3,200.00
PTFE Syringe Filter 0.45um 25mm diameter white Color 100 pcs packet

Description

PTFE Syringe Filter 0.45um 25mm Diameter 100/Pk white Color

PTFE Syringe filter

  • For removing particulates, reducing signal-to noise ratios and maintaning flat baselines.
  • Filtering aqueous and organic solution
  • Two type in pore size 0.22um and 0.45um in filter size: 25mm

Features

  • This PTFE+PP pre-filter provides two times greater throughput than standard without pre-filtration.
  • Broad Chemical compatibility choose for filtering aqueous and organic solutions low protein binding

Applications: 

  • Industrial Chromatography.
  • Filtration of aqueous solutions as well as organic solvents and chemical

Specification:

  • Material of housing : PP
  • Effective filtration area cm²: 25mm/4.15cm²
  • Pore size (um) : 0.22/0.45
  • Process volume (ml) : 100ml(25mm)
  • Maximum Operating Temperature : 130°C
  • Maximum Operating Pressure (psi) : 87psi

Supplier in BD: Elite Scientific & Meditech Co

Categories:  

PTFE syringe filter 0.22um 25mm dia white color

$3,200.00
PTFE Syringe Filter 0.22um 25mm white Color 100 pcs packet

Description

PTFE Syringe Filter 0.22um 25mm Diameter 100/Pk white Color

PTFE Syringe filter

  • For removing particulates, reducing signal-to noise ratios and maintaning flat baselines.
  • Filtering aqueous and organic solution
  • Two type in pore size 0.22um and 0.45um in filter size: 25mm

Features

  • This PTFE+PP pre-filter provides two times greater throughput than standard without pre-filtration.
  • Broad Chemical compatibility choose for filtering aqueous and organic solutions low protein binding

Applications: 

  • Industrial Chromatography.
  • Filtration of aqueous solutions as well as organic solvents and chemical

Specification:

  • Material of housing : PP
  • Effective filtration area cm²: 25mm/4.15cm²
  • Pore size (um) : 0.22/0.45
  • Process volume (ml) : 100ml(25mm)
  • Maximum Operating Temperature : 130°C
  • Maximum Operating Pressure (psi) : 87psi

Supplier in BD: Elite Scientific & Meditech Co

Categories:  

Syringe filter 0.22um 25mm dia PVDF

$4,500.00
PVDF Syringe Filter 0.22um 25mm Diameter 100 pcs packet

Description

PVDF Syringe Filter 0.22um 25mm Diameter 100/Pk

PVDF Syringe filter

  • Low protein-binding for filtration of non-aggressive aqueous and mild organic solution
  • Low UV absorbing extractables and low nonspecific protein binding
  • Two type in pore size 0.22um and 0.45um in filter size: 25mm

Features

  • This PVDF+PP pre-filter provides two times greater throughput than standard without pre-filtration.
  • Hydrophilic membrane with good solvent resistance.

Applications: 

  • Sterilizing/Clarifying filtration of biological solutions.
  • Excellent chemical compatibility even with aggressive acids and alcohol/
  • Filtration of samples where high protein recovery is desired

Specification:

  • Material of housing : PP
  • Effective filtration area cm²: 25mm/4.15cm²
  • Pore size (um) : 0.22/0.45
  • Process volume (ml) : 100ml(25mm)
  • Maximum Operating Temperature : 100°C
  • Maximum Operating Pressure (psi) : 87psi

Supplier in BD: Elite Scientific & Meditech Co

Categories: