Cleanroom drying oven UF1060, 1060 L, ESMC, Memmert, Germany
$2,350,000.00
Cleanroom drying oven, UF Series, 1060 L, Memmert, Germany
- Model: UF1060
- Volume: 1060 L
- Manufacturer: Memmert
- Country of Origin: Federal Republic of Germany
Cleanroom drying oven, UF1060
Fraunhofer TESTED DEVICE comes with the standard version. The cleanroom-compliant drying oven is ideal for microelectronics, medical technology, pharmaceutics and food technology.
The suitability of the Memmert universal oven UF1060 for use in the cleanroom has been confirmed by the independent Fraunhofer IPA (Institute for Manufacturing Engineering and Automation). It is therefore entitled to bear the certificate Fraunhofer TESTED DEVICE®. In order to guarantee the maximum quality assurance, the drying oven was tested in accordance with a uniform and statistically secured standard. The tested appliance was given the certificate in its standard version without any modifications such as particulate filters. Even with maximum air recirculation, the UF1060 attains cleanroom class 5 in accordance with DIN EN ISO 14644-1, without recirculating air, it is certified in the chamber with cleanroom class 6.
Standard delivery Cleanroom drying oven
The universally applicable oven is our classic appliance for temperature control in science, research and material tests in industry. The technologically perfected masterpiece made of high-quality, hygienic, easy-to-clean stainless steel leaves nothing to be desired in terms of ventilation and control technology, overtemperature protection and precisely tuned heating technology.
- Temperature range up to +300 °C
- Model size 1060 litres volume
- 1 model variant SingleDISPLAY
- Forced air circulation F
- intuitive and easy-to-use operating menu
- air exchange rates and air flap position electronically controllable
- temperature and air exchange ramps programmable via AtmoCONTROL software (models with TwinDISPLAY)
- pre-heated fresh air prevents temperature fluctuations
- almost exclusive use of high-quality, corrosion-resistant and easily cleanable stainless steel for the working chamber and housing
- Heating concept specifically adapted for a precise and homogenous temperature control
- a wide range of options for programming and documentation using interfaces, integrated data logger and Software AtmoCONTROL
- 3 years guarantee worldwide
Technical Data
Temperature:
- Working temperature range: at least 5 (UN/UNplus/UNm/UNmplus) or 10 (UF/UFplus/UFm/UFmplus) above ambient temperature to +300 °C
- Setting accuracy temperature: up to 99.9 °C: 0.1 / from 100 °C: 0.5
- Setting temperature range: +20 to +300 °C
- Temperature sensor: 1 Pt100 sensor DIN class A in 4-wire-circuit
Control technology:
- Language setting: German, English, Spanish, French, Polish, Czech, Hungarian
- ControlCOCKPIT: SingleDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour display
- Timer: Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
- Function SetpointWAIT: the process time does not start until the set temperature is reached
- Calibration: three freely selectable temperature values
- adjustable parameters: temperature (Celsius or Fahrenheit), fan speed, air flap position, programme time, time zones, summertime/wintertime
Ventilation:
- Fan: forced air circulation by 2 quiet air turbines, adjustable in 10 % steps
- Vent: vent connection with restrictor flap
- Communication:
- Documentation: programme stored in case of power failure
- Programming: AtmoCONTROL software for reading out, managing and organising the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand).
Safety:
Temperature control: adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature
Autodiagnostic system: for fault analysis
Standard equipment:
- Works calibration certificate: Calibration at +160°C
- Door: fully insulated stainless steel doors with 2-point locking (compression door lock)
- Internals: 2 stainless steel grid(s), electropolished
Stainless steel interior:
- Dimensions: w(A) x h(B) x d(C): 1040 x 1200 x 850 mm (d less 39 mm for fan)
- Interior: easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
- Volume: 1060 l
- Max. number of internals:14
- Max. loading of chamber: 300 kg
- Max. loading per internal: 20 kg
Textured stainless steel casing:
- Dimensions: w(D) x h(E) x d(F): 1224 x 1720 x 1035 mm (d +56mm door handle)
- Installation: on lockable castors
- Housing: rear zinc-plated steel
Electrical data:
- Voltage Electrical load: 400 V and 3x 230 V w/o neutral, 50/60 Hz approx. 7000 W
Ambient conditions:
- Set Up: The distance between the wall and the rear of the appliance must be at least 15 cm. The clearance from the ceiling must not be less than 20 cm and the side clearance from walls or nearby appliances must not be less than 5 cm.
- Altitude of installation: max. 2,000 m above sea level
- Ambient temperature: +5 °C to +40 °C
- Humidity rh: max. 80 %, non-condensing
- Overvoltage category: II
- Pollution degree: 2
- Net weight: approx. 252 kg
- Gross weight carton: approx. 416 kg
Images are reference only. Actual product may be different.
Click Our Social Network Links
Download Catalogue
Cleanroom drying oven UF1060, 1060 L
