Forced Convection Lab Oven, UF30plus, 32 L, ESMC, Memmert, Germany

$450,000.00

Universal Lab Oven, UFplus Series, 32 L, Memmert, Germany

Model: UF30plus
Volume: 32 L
Manufacturer: Memmert
Country of Origin: Federal Republic of Germany

Forced Drying Cabinet, UF30plus, 32 L.

The Memmert UF30PLUS forced convection lab oven has a capacity of 1.1 Cu Ft (32 L) with a temperature range of Ambient +10° to 300°C and comes with dual digital display controllers with programmaning. Memmert UFplus series forced convection heating and drying ovens offer 300°C maximum temperatures with digital control and dual TwinDISPLAY. These ovens have universal applicability to heating and drying applications in industry, science and research institutes and combine top precision and safety with optimal operating comfort.

Memmert UF30plus ovens are designed for heat treatment: testing materials, aging computer chips, performing complex experiments, drying or tempering electronic components. All cabinets are made of high quality stainless steel.

Memmert UFplus drying ovens – with forced ventilation are equipped with the TwinDISPLAY controller and have the following basic equipment:

Temperature range 30-300°С, but not lower than ambient temperature plus 5°С.
Electronic PID process controller with self-diagnostic system for faster troubleshooting.
Touchpad to navigate between settings
Motorized air damper with 0-100% opening adjustment for air exchange
Programmable timer up to 99 days 23 hours
2 TFT color displays for displaying set and actual temperature, air damper opening degree, process time, superheat limit setting, real-time process monitoring and menu settings.
Overtemperature monitoring TWW, protection class 3.1 and adjustable temperature limitation TWB, protection class 2, optical alarm indicator.
2 platinum temperature sensors PT100, for mutual control and replacing each other in case of breakage.
Ethernet port on the rear panel for logging the drying process
USB port for programming and documentation
Built-in logging system
HeatBALANCE technology for distribution of heating energy between the top and bottom wall.

The main features of Memmert laboratory ovens, UF30plus, 32 L:

The new ControlCOCKPIT controller has 2 versions SingleDISPLAY or TwinDISPLAY, a touch control panel and displays for temperature, humidity, fan speed, ventilation damper opening degree, interior lighting degree, overheat protection settings and real-time process graphs.
Speed up the drying process due to increased airflow due to oversized inlets and outlets
Fan speed and motorized damper position are controlled by the ControlCOCKPIT on all Memmert equipment
Sending notifications about abnormal situations by e-mail using the AtmoCONTROL software or by SMS notification (option)
All new generation devices come standard with an Ethernet communication interface
Devices with TwinDISPLAY control panel are equipped with a USB port as standard
Using high quality stainless steel
Heating from 4 sides for more uniform temperature distribution and heating of samples inside the chamber
Improved thermal insulation and an optimized heating system have increased the heating rate by up to 30%
The special design of the door handle allows you to open / close the door with almost any part of the body, in case your hands are busy
Possibility to change the opening side of the door without the involvement of certified specialists
New intuitive AtmoCONTROL PC software for programming and process documentation
Built-in timer from 1 min to 99 days 23 h
HeatBALANCE technology that allows you to adjust the distribution of power between the upper and lower parts of the heating
Forced convection with an internal fan
Stainless steel interior
Digital PID-microprocessor controller with 2 high-definition TFT-color displays with programmability
Timer: Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Adjustable Parameters: temperature (Celsius or Fahrenheit), air flap position, program time, time zones, daylight savings time
Function SetpointWAIT: the process time does not start until the set temperature is reached
Language Setting: German, English, Spanish, and French
Calibration: three freely selectable temperature values
3 year warranty

Technical Specifications:
Volume approx.	1.1 Cu Ft (32 L)
Temperature range	+10°C above ambient temperature to +300°C
Setting temperature range	+20° to +300°C
Setting accuracy °C	up to 99.9: 0.1 / from 100: 0.5
Contoller	TwinDISPLAY: dual TFT color touchscreens, manage data, save log files, monitor up to 32 devices online, automatic alarms emailed, archive of ramps and program sequences, real-time view of program sequences, Loops can be inserted within a temperature contol program at any place, download and manage programs via Ethernet or USB
Interfaces	Ethernet and USB
Housing	Textured stainless steel, rear zinc-plated steel, TFT color display with touchscreen, fully insulated stainless steel door
Interior	Stainless steel (ASTM 304) with all-round deep-drawn ribs to integrate the large-area heating with ceramic-metal sheath
Fresh air	Admixture of pre-heated fresh air by electronically adjustable air flap
Chamber Dimensions (W x H x D)	15.7 x 12.6 x 9.8 inches (400 x 320 x 250 mm)
Maximum number of grids/shelves	3 (1 included)
Maximum loading per grid/shelf	44 lbs (20 kg)
Maximum loading of chamber	132 lbs (60 kg)
Maximum loading per slide-in drip tray	3.3 lbs (1.5 kg)
Maximum loading per bottom drip tray	3.3 lbs (1.5 kg)
Exterior Dimensions (W x H x D)	23 x 27.7 x 17.1 inches (585 x 704 x 434 mm)
Standard works calibration certificate (measuring point chamber center)	°C +160
Electrical	115 V, 50/60 Hz, 1600 Watts (230 V available)
Net weight approx.	99.2 lbs (45 kg)
Gross weight (packed in carton) approx.	134.5 lbs (61 kg)
Shipping Dimensions (W x H x D)	26 x 35 x 25.6 inches (660 x 890 x 650 mm)